Inexpensive Model Transport and Basing Alternative...

My $5 storage box(without the lid on)...

One of the things I struggle with as both a modeler who wargames at home and advisor to the Military History Club at the high school where I teach(Military History amongst other subjects), is how to transport my models and figures between home and school.  I have a fancy BattleFoam case for my Warmachine figures but I don't want to invest that kind of money again into army transports. 
Years ago I bought some K & J magnets(see link to the right on this blog) so I could convert a plastic warjack kit so it could have swappable arms, weapons and heads(see this post). I decided to put my extra magnets to use for two purposes...both for army transport and for basing of armor.  I shook my box up a bit and the tanks barely shifted...which meaning this should work well for carrying them back and forth to my club.

With some tanks removed.

I used a regular plastic scrapbooking container(I believe I bought this at Target for $5 a couple of years ago) and glued in some magnetic strips that I bought at Staples for about the same price(it comes in a roll).  The magnetic strip has paper on one side and an adhesive so you could, in theory, just tape these into your box.  However, I went ahead and white glued(Weldbond) the strips into the bottom of the container just to be sure(because the stripping comes in a roll, it could curl on you). I put some heavy books on top of the strips(into the box) while they dried. If you wanted to, you could glue some cardboard or foamcore beneath the magnetic strips to raise the magnetic material up closer to the hull of the tank(if your magnets on the bottom of the tank are shallow, this might be the way to go...you can see in the pic above that I did this for a couple of the strips).  For you fantasy or 28mm historical gamers, just glue a small magnet inslip the lip of your base(such as the Privateer Press variety) and you could carry your minis the same way.  You could even do this for Warjacks from Warmachine(anything you can attach a magnet under).

The not so pretty angle of my tank models where I glued the magnets...

Then I took my tank models and attached a small magnet to the bottom of each one using a dab of superglue.  The magnets I used were 1/8" by 3/32"(kit D203 K&J magnetics) but any magnets with a strong power should do.  You could even glue more plastic strip to the bottom of the tanks from the roll you used from the box(but I don't trust this because it's magentic hold is not as strong as the K&J magnets(which are very much like Rare Earth magnets which many of you may be familiar with.  I found that all of the Plastic Soldier Company tanks had a bottom hull about the same distance off the ground so these magnets were the right depth to contact with the strip in the box.  However, the Armourfast T-34's I had were a little higher, so(as shown above) I used some green stuff to lower the depression of the magnet so it would contact the box strip.


A PSC Panzer III on a detachable(magnetized) base.

Now off the base..note the magnetic strip on the base.

Here is the fun part.  I personally prefer unbased tank models for gaming but I do like the "finished" look that a based tank has when I see them on the blogs and websites of others.  Now I can have the best of both worlds due to the magnets.  I put some magnetic strip on a base which I raised up a bit by gluing it to a small block of foamcore.  I then used some putty to even out the ground around this magnet and did applied my usual dirt texture/static grass for the base.  Now I have a nice little movement/display base for my tank.


The same base now hosting a T-34.

The best part is, I can mass produce these and even swap out different tanks on them(as shown above).  For those that don't like have a winter-based tank on Spring green board, consider this alternative way of tank basing...you could swap out a Spring base for a snow base(or urban/desert, etc.) for any of your armor models!

Well, that's it for now. Whether you are a historical or fantasy gamer, I hope you can use this method of transport and/or basing for your own collection.

Thanks for viewing...happy wargaming everybody!
~Gareson

German T-34's?

Well, after painting up my Plastic Soldier Company T-34's I could barely stand to look at my first generation Armourfast one's which looked like the rough mockup for the better PSC kit at best.  What do you do with old Soviet tanks that don't mix well with their newer counterparts? Give them to the Germans!...

As you can see I painted over my old Armourfast T-34/76 models with some rudimentary German camo.  I didn't spend that much time on these to be honest...just enough of a makeover to field them as auxiliary units in my German BattleGroup Kursk battlegroup(which the rules allow for by the way). I always find it interesting that the a German SS battalion at Kursk fielded captured and repurposed T-34's.

I like the way the German scheme disguises the simplicity of this kit's design.  It was an o.k. model for it's day...but it is just too short on details.  That being said, it will be fun to pit T-34's against T-34's.  My money's on the German crews.

Well, they'll do for a quick job on a rough model...thanks for viewing everyone.

Panzer III's Vorwarts!

When I first saw the Plastic Soldier Company 1/72 Panzer III kits announced I was pretty excited because I loved the other German armor they'd already put out in the scale.  This relatively new box set comes with three Panzer IIIG or H model tanks(I modeled the H).

The kit was very easy to assemble and each complete tank used parts from a single sprue...everything fit together well.  The only hiccup was a slight molding error(a small pinhole on the top of the gun assembly) that I filled with some green stuff. 

I've been playing around with washes lately and I am very happy to say that I finally have a method that I am happy with.  After basecoating the model with Vallejo Model Air colors, I sealed each tank with a straight out of the bottle airbrushed coat of Pledge Floor Care Multi-Surface Finish.  This is the same product known as "Future" except they have dropped the future logo altogether(I called the manufacturer to confirm it is the same thing).  I used this as a perfect gloss sealer of the painting before going on to washes.
Speaking of my wash...
I used a "Magic Wash" homebrewed Dark Umber wash using the following:
-4 parts water
-1 part Pledge Finish(see above)
-1 dropper of Liquitex Umber Ink
-1 dropper of Liquitex Black Ink

This wash perfectly found it's way into the panel and hatch lines around the model while having almost no effect on  the overall hue of the model.  Below you can see one  of my Panzer IVH's from PSC next to the Panzer III.  For the Panzer IV I used Vallejo Umber Wash and it really shaded the model and took down the colors. Additionally, I had to go in and do a pin wash of black wash on the panel lines of the Panzer IV manually.  Note that on the Panzer III, using the method described above, I just did a straight out overall wash of the Pledge/Ink magic wash and the details are even crisper that with the previous pinwashing on the Mark IV(note: for the two tanks below I used identical basecoating/highlighting methods...but note how much more effective the wash was on the Panzer III(bottom)). 

I finished up the model with a blast of Testor's Dullcoat to knock out the shine and mud pigments from Vallejo.  I love these little "Panzer Dreis" and they will make a nice addition to my German army. 

Thanks for viewing/reading...happy wargaming everybody.
~Gareson

P.S. More bad news about the way Games Workshop treats retailers and gamers today...SO GLAD I dropped that game and company years ago! 

T-34's Ready For Action...

 

PSC T-34 with 76mm turret

The first "easy assembly" kits I ever built were Armourfast T-34's.  I thought they were pretty nice at the time, but these Plastic Soldier Company 1/72 T-34's blow them away.  Furthermore, when I bought the old Armourfast kits(which aren't nearly as detailed), I had to buy different boxes for the T-34/76 and T-34/85 tanks...even though they provided identical chassis(just a different turret sprues).   PSC has been considerate enough to include both variant turrets in a single box!

PSC T-34 with 85mm turret

All of the PSC kits that I have built so far are well-designed but these were some of the easiest to assemble(especially as the tracks are one piece).  I didn't modify the kits at all except for a few stowage pieces from my bits box(German jerry cans from the Panzer IV kit, a twig, other random bits).  I am especially pleased with the look of the twig, used to model a traction/mud log, because I attached it...primed it...painted it...and it ended up looking exactly like the original wood piece did!

As far as painting, as with my previous Soviet armor, I went with a little bit of a lighter green rather than the darker hue that true Soviet armor would have sported.  I actually used the recipe from the Battlegroup Kursk rulebook tutorial(with exception of using  Dark Green Vallejo Primer).  I basecoated with Russian Green and then highlighted with Interior Green(both Vallejo Model Air).  The hit the raised outlines of the tank with some Hemp(Vallejo Model Air) that I drybrushed and line in.

After that I gave the whole thing a glosscoat of Vallejo Gloss Medium airbrushed on.  I followed this with a oil wash use Winsor & Newton Umber oil paint from a tube mixed with Turpenoid.  Next time I will use Mineral Spirits because the Turpenoid was extremely glossy and slow to dry. In fact, it took me several coats of Testor's Dullcoat to knock down the shine after it dried.  Before the wash I hand-painted all the slogans.  There are some nice decals for this...but I prefer to hand do them because I like the haphazard look of unevenly scribed mottos that the soldiers themselves would have painted on.

As a finishing touch I added some mud pigments to the wheels and lower hull of the tank(front and back).

Having not painted armor for many years there are many techniques I am re-learning and new ones that I am catching up with.  I am sure that with more practice I will refine these skills.

Finally, here is a shot of my next trio of Plastic Soldier Company tanks that is (clearly) a work in progress...I have merely begun work on these tanks and have a lot of work to do yet...

Well, that's it for now...thanks for viewing everyone!

Happy wargaming everybody...
~Gareson

T70's Light Tanks and Refurbushed Soviet Armor...

I finally finished painting up these Soviet T-70 light tanks from Plastic Solider Company.  I love these two man little AFV's and they are a nice addition to the usual T-34 and KV mediums you uusally see on the battlefield...
(click on any photos for larger images).

 

I roughly used the colors suggested by the Battlegroup Kursk rulebook in their T-34 painting tutorial section(with the exception of starting with Vallejo's Dark Green Primer over Black). I know Soviet armor would have been a bit of darker green but I like the look of the lighter hue on 1/72 scale tanks in terms of bringing out the details of the models.   From primer to highlights here is what I used(applied via airbrush)...

Primer: Vallejo Dark Green Primer
Basecoat: Vallejo Russian Green Model Air
1st Highlight: Vallejo Interior Green Model Air
2nd Highlight: Vallejo Interior Green Model Air + White Model Air
3rd Highlight: Vallejo Hemp Model Air(applied via detail brush to seems/details)
After applying the basic greens I applied a generous glosscoat of Vallejo gloss to the models.  In reptospect, I applied too many coats of this because I lost some of the detail on the rivets when I went to pinwash.  After glossing, I gave the tanks a wash of Vallejo Umber Wash and pin-washed with Reaper Brown Liner.  I really want to experiment with oil paints for washes as often suggested online but I am not brave enough yet as I have worked only with acryllics. 
After matte-coating the models(again Vallejo) I applied some sublte mud/exhaust effects with the Tamiya weathering kit.  I also went back and painted up the headlight and gave it a glosscoat. 

I also refurbished some very old models that have seen heavy abuse on the wargaming table over the years.  Both had some broken bits and lousy paintjobs but I believe I have them ready for the gaming table again.  First, my Pegasus Hobbies(I think) Su-152.  The slogan on the side(in Russian) reads "revenge".

and my old BA-10(pretty sure it was UM Models)..  The BA-10 is missing a headlight and I had to borrow a spare wheel off the side for road use, but...you know, "battle damage".

Here are the three together.  Note how the heavy SU-152 dwarfs its lighter comrades...

As far as the future, I have some T-34's in the works as well as some Panzer III's. 
Happy wargaming everbody, and thanks for viewing...
~Gareson

Panzer IV's Complete

Well, admittedly, maybe not completely complete...I am going to add some mud pigments down the line. 

Anways, above are my mostly finished Plastic Soldier Company 1/72 Panzer IVH models. 

The Panzer IVH has always been my favorite tank of World War II...there's something about it's harsh lines and pragmatic engineering that make it the quintessential panzer. 

My wife was kind of nice to build these for me so that I could dive in and try my first ever experiment in airbrushing.  Like painting minis, I am sure it is a skill I will improve with over time.

That being said, my goal of making soft-edged mid war German camouflage seems to have been achieved.  I've ben painting miniatures for many years while I never gave much time to my armor(a quick Testor's spray with a simple wash/drybrush at best).  

This time I did a lot of research and added more than just the airbrushing...including a wash over a glosscoat and a pin-wash to bring out the details. 

In the final photo you can see the panzer commander figure that came with the tank. 
So this is the beginning of my Grossdeutschland Division armored contingent with much more on the way.

Thanks for viewing...happy wargaming everybody,
Gareson

Panzer IV's to the Fore...

Well it is still the early stage of painting these Plastic Soldier Company Panzer IVH 1/72 tanks(tracks/tools still unplainted, no washes, no pin wash, no weathering, no higlighting...yet) but I like the way the basecoat color and camoflauge looks so far. 

This is my first time every using an airbrush(outside of the practicing I did on some 'junk' tanks) so, given my noobiness, I am fairly pleased.  I used Vallejo Dark Yellow Primer to begin followed with Vallejo Dark Yellow Model Color as a basecoat(which I highlighted with some beige put into the mix).  The camo colors(brown and green) were Vallejo Model Air colors.  They say that you don't need to thin these to spray them in your airbrush I found the brown a little chunkey and splattery...so I had to go back to apply a little thinner to the cup; it's possible I didn't shake it up well enough before hand.  The green was fine right out of the bottle.   I wanted the camo patterns to have a bit of a faded look so I went back over the whole think with a heavily thinned layer of the Dark Yellow basecoat. 

So now I will move into the detailing stages.....I am excited to see how the whole thing turns out.

On another note, my Plastic Soldier Company order of Pak38 50mm AT Guns just arrived as well as my Battlegroup Kursk rulebook...yay!

Soviet Armor Arrives...

I recently received some Soviet tanks that I built and painted up for 20mm Blitzkrieg games. first up is a SU-152 Assault Gun. This super heavy tank had a 152mm gun- though it had a notoriously slow rate of fire(the charge and shell were loaded seperately); in our game it therefore can fire every other turn. That being said, it is a beast that has thick armor and delivers a punch. Soviet tank crews liked to paint slogans on the sides of their tanks...thanks to my Russian exchange student, Anton, I have accurately depicted the expression "Revenge" on the side of the SU-152.

These SU-85 tank hunters were simple emplacements of the 85mm gun on the T-34 chasis. Before the arrival of the 85mm-housing T-34 turret, the SU-85 beefed up the killing ability of Soviet tank divisions against heavy German armor. The slogans on these two tank hunters read, from left to right, "To Berlin!" and "Tiger Hunter" respectively.