COMANDOS DE PKT , APLICADO A INTERVLAN ROUTER ON A STICKS
PARA RETRASADOS
TOPÓLOGIA GENERAL INICIAL
PASO 1 : Implementar seguridad básica para todos los dispositivos intermedios
ROUTER “R1”
ENABLE
CONF T
HOSTNAME R1
LINE CONSOLE 0
PASSWORD upc123
Login
Exit
LINE VTY 0 15
PASSWORD upc123
Login
Exit
ENABLE SECRET upc321
Banner motd $ *** SOLO PERSONAL AUTORIZADO *** $
NO IP DOMAIN-LOOKUP
DO WRITE MEMORY
SWITCHS “S1, S2, S3”
ENABLE
CONF T
HOSTNAME S1 , S2 , S3 -> NOMBRAR EN CADA SWITCH, no seas idiota te poner esta línea en un solo SW
LINE CONSOLE 0
PASSWORD upc123
Login
Exit
LINE VTY 0 15
PASSWORD upc123
Login
Exit
ENABLE SECRET upc321
Banner motd $ *** SOLO PERSONAL AUTORIZADO *** $
NO IP DOMAIN-LOOKUP
DO WRITE MEMORY
EXIT
PASO 2 : Crear Vlans en todos los Switches
ENABLE
CONF T
VLAN 10
NAME MKT
VLAN 20
NAME VTAS
VLAN 99
NAME MANAGEMENT&NATIVE
DO WRITE MEMORY
EX
PASO 3 : Asignar puertos de acceso a las Vlans de los SW “S2 y S3”
S2 : S3 :
en en
conf t conf t
int range f0/2, f0/11-18 int range f0/2, f0/11-18
switchport mode access switchport mode access
switchport access vlan 10 switchport access vlan 10
ex ex
int range f0/3, f0/4-10 int range f0/3, f0/4-10
switchport mode access switchport mode access
switchport access vlan 20 switchport access vlan 20
do show vlan brief do show vlan brief
PASO 4 : Asignar puertos de trunks a las Vlans de los SW “S1,S2 y S3”
Nota : Configurar switches para VLANS, hay 2 puertos
ACCESS PORTS : Conectados entre SW <---> PCs
TRUNKING PORTS : Conectados entre SW <---> SW o SW <-----> ROUTER
S1:
int range f0/1-2, g0/1
switchport mode trunk
switchport trunk native vlan 99
S2:
int f0/1
switchport mode trunk
switchport trunk native vlan 99
S3:
int f0/1
switchport mode trunk
switchport trunk native vlan 99
PASO 5 : Configuramos los IPs de los todos los Switchs
S1:
int vlan 99
ip address 192.168.99.11 255.255.255.0
no shutdown
exit
ip default-gateway 192.168.99.1
S2:
int vlan 99
ip address 192.168.99.12 255.255.255.0
no shutdown
exit
ip default-gateway 192.168.99.1
S3:
int vlan 99
ip address 192.168.99.13 255.255.255.0
no shutdown
exit
ip default-gateway 192.168.99.1
PASO 6 : VERIFICAR CONECTIVIDAD ENTRE SW
PASO 7 : VERIFICAR SUB_INTERFACES (ROUTER ON A STICK)
R1:
int g0/0
no ip address
int g0/0.10
encapsulation dot1Q 10
ip address 192.168.10.1 255.255.255.0
int g0/0.20
encapsulation dot1Q 20
ip address 192.168.20.1 255.255.255.0
int g0/0.99
encapsulation dot1Q 99 NATIVE
ip address 192.168.99.1 255.255.255.0
exit
int g0/0
no shutdown
DO SHOW RUN
END
COPY RUN START
PASO 8 : CONFIG LA RED DE LOS SERVIDORES
R1:
int g0/1
IP ADDRESS 192.168.1.1 255.255.255.0
NO SHUTDOWN
SWM:
INT VLAN 1
IP ADDRESS 192.168.1.2 255.255.255.0
NO SHUTDOWN
IP DEFAULT-GATEWAY 192.168.1.1
PASO 9 : CONFIGURAR IPS ESTATICOS A LOS SERVIDORES
DNS-WEB-FTP:
IPv4 Address : 192.168.1.21
Subnet Mask : 255.255.255.0
Default-Gateway : 192.168.1.1
DNS Server : 192.168.1.21
CORREO-TFTP:
IPv4 Address : 192.168.1.22
Subnet Mask : 255.255.255.0
Default-Gateway : 192.168.1.1
DNS Server : 192.168.1.21
PASO 10 : SERVICIOS DE HDCP
R1:
ip dhcp excluded-address 192.168.10.1 192.168.10.50
ip dhcp excluded-address 192.168.20.1 192.168.20.50
ip dhcp pool POOL-VLAN10
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 192.168.1.21
domain-name upc.edu.pe
ip dhcp pool POOL-VLAN20
network 192.168.20.0 255.255.255.0
default-router 192.168.20.1
dns-server 192.168.1.21
domain-name upc.edu.pe
do show run
TOPÓLOGIA GENERAL FINAL
PCs con DHCP
TELNET
