TS0601 _TZE284_r3szw0xr unsupported roller blind motor

[emilf44]

Hi,

This roller blind I just bought is unsupported and I'm to green to add it myself it seems.

export default {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_r3szw0xr',
description: 'Automatically generated definition',
extend: [],
meta: {},
};

Link to item: https://www.aliexpress.com/item/1005009592122691.html?spm=a2g0o.order_list.order_list_main.29.73881802SYmHjT

Thanks.

[Koenkk]

Could you try to:

• Stop Z2M
• Open data/database.db with a text editor and change all occurrences of _TZE200_7shyddj3 to _TZE284_r3szw0xr
• Start Z2M and see if the device now works

[Koenkk]

You can try out different manufacturer names from different definitions, e.g. for TS0601_cover_2 use _TZE200_eegnwoyw

Link: https://github.com/Koenkk/zigbee-herdsman-converters/blob/9ac08a7e56f763d5856ed93579446ae6eacf9b1e/src/devices/tuya.ts#L4825

[emilf44]

Okay I tried it but it still only moves small increments at a time. I have a Zigbee tuya gateway so I tried pairing it with that and checking the developer platform and hoping that some one can write a usable profile for the blinds.

I can see this as the table of instruction set:
DP Instruction Standard Instruction
control
control
time_total
time_total
work_state
work_state
percent_state
percent_state
percent_control
percent_control
control_back
control_back_mode
border
border
position_best
position_best
switch_mode

p_mode

speed

dot_move

key0

[emilf44]

And this also:

control Enum
{
"range": [
"open",
"stop",
"close"
]
}
percent_control Integer
{
"unit": "%",
"min": 0,
"max": 100,
"scale": 0,
"step": 1
}
control_back_mode Enum
{
"range": [
"forward",
"back"
]
}
border Enum
{
"range": [
"up",
"down",
"up_delete"
]
}
position_best Integer
{
"unit": "%",
"min": 0,
"max": 100,
"scale": 0,
"step": 1
}

[emilf44]

And I got this from the logs after using all the functions in the smart life app:
2025-09-05 18:07:08 Report Border Del all limit device itself
2025-09-05 18:07:02 Report Direction Reverse device itself
2025-09-05 18:06:58 Report Dot Move on device itself
2025-09-05 18:06:56 Report Percent State 0% device itself
2025-09-05 18:06:54 Report Dot Move off device itself
2025-09-05 18:06:46 Report Border Stop device itself
2025-09-05 18:06:42 Report Border downRun device itself
2025-09-05 18:06:41 Report Border Stop device itself
2025-09-05 18:06:38 Report Border upRun device itself
2025-09-05 18:06:26 Report Control Down device itself

2025-09-05 18:06:20 | Report | Control | Up | device itself |  

[emilf44]

You can try out different manufacturer names from different definitions, e.g. for TS0601_cover_2 use _TZE200_eegnwoyw

Link: https://github.com/Koenkk/zigbee-herdsman-converters/blob/9ac08a7e56f763d5856ed93579446ae6eacf9b1e/src/devices/tuya.ts#L4825

I also got the codes from the Tuya developer platform.

Control
code: "1"
Time total
code: "2"
Work state
code: "3"
Dry contact switch mode
code: "101"
AC switch mode
code: "102"
Speed
code: "103"
Percent state
code: "8"
Dot mode
code: "104"
Percent control
code: "9"
Pin code
code: "105"
Direction
code: "11"
Border
code: "16"
Favorito
code: "19"

[emilf44]

Sorry for the spam.

I had chatgpt create a converter for me but the only thing that works is percent control, and that works flawlessly and opens the blinds to the % set. But it does not show up as a cover in Home Assistant and no other functions work at all.

The code is here:

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const e = exposes.presets;
const ea = exposes.access;

const definition = {
    fingerprint: [
        {
            modelID: 'TS0601',
            manufacturerName: '_TZE284_r3szw0xr', // Replace with actual name from Zigbee2MQTT logs
        },
    ],
    model: 'TS0601_motor_custom',
    vendor: 'Tuya',
    description: 'Custom Tuya motor with advanced control',
    fromZigbee: [tuya.fz.datapoints],
    toZigbee: [tuya.tz.datapoints],
    configure: tuya.configureMagicPacket,
    exposes: [
        e.enum('control', ea.ALL, ['stop', 'open', 'close']).withDescription('Control the motor'), // DP 1
        e.numeric('time_total', ea.STATE).withUnit('s').withDescription('Total movement time'), // DP 2
        e.enum('work_state', ea.STATE, ['opening', 'closing', 'stopped']).withDescription('Work state'), // DP 3
        e.enum('dry_contact_switch_mode', ea.ALL, ['mode1', 'mode2']).withDescription('Dry contact switch mode'), // DP 101
        e.enum('ac_switch_mode', ea.ALL, ['mode1', 'mode2']).withDescription('AC switch mode'), // DP 102
        e.numeric('speed', ea.ALL).withValueMin(0).withValueMax(100).withDescription('Motor speed'), // DP 103
        e.numeric('percent_state', ea.STATE).withUnit('%').withDescription('Current percent position'), // DP 8
        e.enum('dot_mode', ea.ALL, ['single', 'multi']).withDescription('Dot mode'), // DP 104
        e.numeric('percent_control', ea.ALL).withUnit('%').withValueMin(0).withValueMax(100).withDescription('Set percent position'), // DP 9
        e.text('pin_code', ea.ALL).withDescription('Pin code for secure operation'), // DP 105
        e.enum('direction', ea.ALL, ['normal', 'reversed']).withDescription('Motor direction'), // DP 11
        e.binary('border', ea.ALL, 'ON', 'OFF').withDescription('Border mode'), // DP 16
        e.binary('favorite', ea.ALL, 'ON', 'OFF').withDescription('Move to favorite position'), // DP 19
    ],
    meta: {
        tuyaDatapoints: [
            [1, 'control', tuya.valueConverterBasic.lookup({'stop': 0, 'open': 1, 'close': 2})],
            [2, 'time_total', tuya.valueConverter.raw],
            [3, 'work_state', tuya.valueConverterBasic.lookup({'opening': 0, 'closing': 1, 'stopped': 2})],
            [101, 'dry_contact_switch_mode', tuya.valueConverterBasic.lookup({'mode1': 0, 'mode2': 1})],
            [102, 'ac_switch_mode', tuya.valueConverterBasic.lookup({'mode1': 0, 'mode2': 1})],
            [103, 'speed', tuya.valueConverter.raw],
            [8, 'percent_state', tuya.valueConverter.raw],
            [104, 'dot_mode', tuya.valueConverterBasic.lookup({'single': 0, 'multi': 1})],
            [9, 'percent_control', tuya.valueConverter.raw],
            [105, 'pin_code', tuya.valueConverter.raw],
            [11, 'direction', tuya.valueConverterBasic.lookup({'normal': 0, 'reversed': 1})],
            [16, 'border', tuya.valueConverter.onOff],
            [19, 'favorite', tuya.valueConverter.onOff],
        ],
    },
};

module.exports = definition;

[emilf44]

So if anyone has this motor and is in my shoes I have managed to make a working converter which I will post below.

It does show percent state, the control function works normally and the percent control as well and setting the motor direction also works. I have not messed with the border function as that was set using the RF remote and seems to work fine still and I don't want to mess with it. I have not been able to find out what the other available functions do as using them does nothing it seems.

What is missing is that it does not show up as cover when trying to add to dashboard using cards that are only for covers.

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');


const definition = {
    fingerprint: tuya.fingerprint("TS0601", ['_TZE284_r3szw0xr']),
    model: 'TS0601_cover',
    vendor: 'Tuya',
    description: 'Cover motor',
    fromZigbee: [tuya.fz.datapoints],
    toZigbee: [tuya.tz.datapoints],
    configure: tuya.configureMagicPacket,
    exposes: [
        e.enum("control", ea.STATE_SET, ['stop', 'open', 'close']).withDescription('Control the motor'), // DP 1
        e.numeric("time_total", ea.STATE).withUnit('s').withDescription('Total movement time'), // DP 2
        e.enum("work_state", ea.STATE, ['opening', 'closing', 'stopped']).withDescription('Work state'), // DP 3
        e.enum("dry_contact_switch_mode", ea.STATE_SET, ['mode1', 'mode2']).withDescription('Dry contact switch mode'), // DP 101
        e.enum("ac_switch_mode", ea.STATE_SET, ['mode1', 'mode2']).withDescription('AC switch mode'), // DP 102
        e.numeric("speed", ea.STATE_SET).withValueMin(0).withValueMax(100).withDescription('Motor speed'), // DP 103
        e.numeric("percent_state", ea.STATE).withUnit('%').withDescription('Current percent position'), // DP 8
        e.enum("dot_mode", ea.STATE_SET, ['single', 'multi']).withDescription('Dot mode'), // DP 104
        e.numeric("percent_control", ea.STATE_SET).withUnit('%').withValueMin(0).withValueMax(100).withDescription('Set percent position'), // DP 9
        e.enum("direction", ea.STATE_SET, ['normal', 'reversed']).withDescription('Motor direction'), // DP 11
        e.enum("border", ea.STATE_SET, ['UP', 'Down', 'Delete']).withDescription('Border mode'), // DP 16
    ],
    
    meta: {
        tuyaDatapoints: [
            [1, "control", tuya.valueConverterBasic.lookup({'stop': tuya.enum(1), 'open': tuya.enum(0), 'close': tuya.enum(2),})],
            [2, "time_total", tuya.valueConverter.raw],
            [3, "work_state", tuya.valueConverterBasic.lookup({'opening': tuya.enum(0), 'closing': tuya.enum(1), 'stopped': tuya.enum(2),})],
            [101, "dry_contact_switch_mode", tuya.valueConverterBasic.lookup({'mode1': tuya.enum(0), 'mode2': tuya.enum(1),})],
            [102, "ac_switch_mode", tuya.valueConverterBasic.lookup({'mode1': tuya.enum(0), 'mode2': tuya.enum(1),})],
            [103, "speed", tuya.valueConverter.raw],
            [8, "percent_state", tuya.valueConverter.raw],
            [104, "dot_mode", tuya.valueConverterBasic.lookup({'single': tuya.enum(0), 'multi': tuya.enum(1),})],
            [9, "percent_control", tuya.valueConverter.raw],
            [11, "direction", tuya.valueConverterBasic.lookup({'normal': tuya.enum(0), 'reversed': tuya.enum(1),})],
            [16, "border", tuya.valueConverterBasic.lookup({'Up': tuya.enum(0), 'Down': tuya.enum(1), 'Delete': tuya.enum(2)})],
        ],
    },
};

module.exports = definition;

[Koenkk]

Could you make a PR by clicking here?

[emilf44]

Could you make a PR by clicking here?

Think I have managed to do it.

[BlairC1]

Basic control are working for me on 2.6.2 but yeah it doesn't show as a cover to home assistant. Also motor speed control doesn't seem to work and it makes a broken sounding set of beeps for a few minutes whenever you change it.

[BlairC1]

This works for me and exposes as a cover. I haven't tested anything other than up/down and percentage control.

const zigbeeHerdsmanConverters = require('zigbee-herdsman-converters');
const zigbeeHerdsmanUtils = require('zigbee-herdsman-converters/lib/utils');


const exposes = zigbeeHerdsmanConverters['exposes'] || require("zigbee-herdsman-converters/lib/exposes");
const ea = exposes.access;
const e = exposes.presets;
const fz = zigbeeHerdsmanConverters.fromZigbeeConverters || zigbeeHerdsmanConverters.fromZigbee;
const tz = zigbeeHerdsmanConverters.toZigbeeConverters || zigbeeHerdsmanConverters.toZigbee;
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
	fingerprint: tuya.fingerprint("TS0601", ['_TZE284_r3szw0xr']),
    model: 'TS0601_cover',
    vendor: 'TuYa',
    description: 'Cover motor',
    fromZigbee: [tuya.fz.datapoints],
    toZigbee: [tuya.tz.datapoints],
    onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime'
    configure: tuya.configureMagicPacket,
    exposes: [
        e.cover_position().setAccess('position', ea.STATE_SET),
        e.numeric("time_total", ea.STATE).withUnit('s').withDescription('Total movement time'), // DP 2
        e.enum("work_state", ea.STATE, ['opening', 'closing', 'stopped']).withDescription('Work state'), // DP 3
        e.enum("dry_contact_switch_mode", ea.STATE_SET, ['mode1', 'mode2']).withDescription('Dry contact switch mode'), // DP 101
        e.enum("ac_switch_mode", ea.STATE_SET, ['mode1', 'mode2']).withDescription('AC switch mode'), // DP 102
        e.numeric("speed", ea.STATE_SET).withValueMin(1).withValueMax(5).withDescription('Motor speed'), // DP 103
        e.enum("dot_mode", ea.STATE_SET, ['single', 'multi']).withDescription('Dot mode'), // DP 104
        e.enum("direction", ea.STATE_SET, ['normal', 'reversed']).withDescription('Motor direction'), // DP 11
        e.enum("border", ea.STATE_SET, ['UP', 'Down', 'Delete']).withDescription('Border mode'), // DP 16
    ],
        // Here you should put all functionality that your device exposes
    
    meta: {
        // All datapoints go in here
        tuyaDatapoints: [
            [1, 'state', tuya.valueConverterBasic.lookup({'OPEN': tuya.enum(2), 'STOP': tuya.enum(1), 'CLOSE': tuya.enum(0)})],
            [9, 'position', tuya.valueConverter.coverPosition],
            [8, 'position', tuya.valueConverter.raw],                        
            [2, "time_total", tuya.valueConverter.raw],
            [3, "work_state", tuya.valueConverterBasic.lookup({'opening': tuya.enum(0), 'closing': tuya.enum(1), 'stopped': tuya.enum(2),})],
            [101, "dry_contact_switch_mode", tuya.valueConverterBasic.lookup({'mode1': tuya.enum(0), 'mode2': tuya.enum(1),})],
            [102, "ac_switch_mode", tuya.valueConverterBasic.lookup({'mode1': tuya.enum(0), 'mode2': tuya.enum(1),})],
            [103, "speed", tuya.valueConverter.raw],
            [104, "dot_mode", tuya.valueConverterBasic.lookup({'single': tuya.enum(0), 'multi': tuya.enum(1),})],
            [11, "direction", tuya.valueConverterBasic.lookup({'normal': tuya.enum(0), 'reversed': tuya.enum(1),})],
            [16, "border", tuya.valueConverterBasic.lookup({'Up': tuya.enum(0), 'Down': tuya.enum(1), 'Delete': tuya.enum(2)})],
        ],
    },
};

module.exports = definition;

[BlairC1]

Hi,

This roller blind I just bought is unsupported and I'm to green to add it myself it seems.

export default { zigbeeModel: ['TS0601'], model: 'TS0601', vendor: '_TZE284_r3szw0xr', description: 'Automatically generated definition', extend: [], meta: {}, };

Link to item: https://www.aliexpress.com/item/1005009592122691.html?spm=a2g0o.order_list.order_list_main.29.73881802SYmHjT

Thanks.

@emilf44 have you had any problems with the device disappearing from devices? I've had it happen a few times now.

[emilf44]

No not happened to me

[BlairC1]

FYI - motor speed for mine is a value from 1 to 5

[BlairC1]

Remote was out of sync with open/close on Zigbee, I've also removed options I dont need. This is what I'm using now...

const zigbeeHerdsmanConverters = require('zigbee-herdsman-converters');
const zigbeeHerdsmanUtils = require('zigbee-herdsman-converters/lib/utils');


const exposes = zigbeeHerdsmanConverters['exposes'] || require("zigbee-herdsman-converters/lib/exposes");
const ea = exposes.access;
const e = exposes.presets;
const fz = zigbeeHerdsmanConverters.fromZigbeeConverters || zigbeeHerdsmanConverters.fromZigbee;
const tz = zigbeeHerdsmanConverters.toZigbeeConverters || zigbeeHerdsmanConverters.toZigbee;
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
	fingerprint: tuya.fingerprint("TS0601", ['_TZE284_r3szw0xr']),
    model: 'TS0601_cover',
    vendor: 'TuYa',
    description: 'Cover motor',
    fromZigbee: [tuya.fz.datapoints],
    toZigbee: [tuya.tz.datapoints],
    onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime'
    configure: tuya.configureMagicPacket,
    exposes: [
        e.cover_position().setAccess('position', ea.STATE_SET),
        e.enum("dot_mode", ea.STATE_SET, ['single', 'multi']).withDescription('Dot mode'), // DP 104
        e.enum("direction", ea.STATE_SET, ['normal', 'reversed']).withDescription('Motor direction'), // DP 11
        e.enum("border", ea.STATE_SET, ['UP', 'Down', 'Delete']).withDescription('Border mode'), // DP 16
        e.numeric("speed", ea.STATE_SET).withValueMin(1).withValueMax(5).withDescription('Motor speed'), // DP 103
        e.text("work_state", ea.STATE)
        
    ],
        // Here you should put all functionality that your device exposes
    
    meta: {
        // All datapoints go in here
        tuyaDatapoints: [
            [1, 'state', tuya.valueConverterBasic.lookup({'OPEN': tuya.enum(0), 'STOP': tuya.enum(1), 'CLOSE': tuya.enum(2)})],
            [3, "work_state", tuya.valueConverterBasic.lookup({'opening': tuya.enum(0), 'closing': tuya.enum(1), 'stopped': tuya.enum(2),})],
            [9, 'position', tuya.valueConverter.coverPositionInverted],
            [8, 'position', tuya.valueConverter.coverPositionInverted],   
            [103, "speed", tuya.valueConverter.raw],
            [104, "dot_mode", tuya.valueConverterBasic.lookup({'single': tuya.enum(0), 'multi': tuya.enum(1),})],
            [11, "direction", tuya.valueConverterBasic.lookup({'normal': tuya.enum(0), 'reversed': tuya.enum(1),})],
            [16, "border", tuya.valueConverterBasic.lookup({'Up': tuya.enum(0), 'Down': tuya.enum(1), 'Delete': tuya.enum(2)})],
        ],
    },
};

module.exports = definition;

[Koenkk]

Does it work with this? Then I can add it.

[BlairC1]

Yep works fine, I'm not sure about the border setting but everything else seems to work fine. I do have a separate issue of it disappearing from devices every 24 hours or so but that might have been from my tinkering, I've given it a factory reset to see if that helps.

[Koenkk]

Integrated, thanks! You can remove the ext converter after updating.

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

[BlairC1]

Great, thanks for that