divece become unsupported after z2mqtt update

[ssrsmart]

What happened?

Hi,

I have 58 devices Tuya TS0726 Switches, all devices was working perfectly and all function was supported switching, scen and power behavior until I update zigbee2mqtt from 1.42.0-2 to 2.6.3-1, all switches become unsupported!, I tried to repair one of the switches but that didn't help, it take too long time to discovered and with the same result, unsupported with no entites

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

2.6.3-1

Adapter firmware version

idontknow

Adapter

HamGeek cc2652p poe Coordinator

Setup

Homeassistant on Intel NCU

Device database.db entry

{"id":5,"type":"Router","ieeeAddr":"0x781c9dfffeefbb5e","nwkAddr":47554,"manufId":4098,"manufName":"_TZ3000_kfkqkjqe","powerSource":"Mains (single phase)","modelId":"TS0726","epList":[1,2,3,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":4,"inClusterList":[0,3,4,5,6,57344,57345],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"65503":"\u0000\u0000\u0000\u0000\u0005","65506":31,"65508":0,"65534":0,"modelId":"TS0726","manufacturerName":"_TZ3000_kfkqkjqe","powerSource":1,"zclVersion":3,"appVersion":70,"stackVersion":0,"hwVersion":1,"dateCode":""}},"genOnOff":{"attributes":{"onOff":1,"onTime":0,"offWaitTime":0,"tuyaBacklightMode":1,"moesStartUpOnOff":0,"tuyaBacklightSwitch":1}},"manuSpecificTuya_3":{"attributes":{"powerOnBehavior":2,"switchMode":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x70c59cfffe4846c6","endpointID":1}],"configuredReportings":[],"meta":{}},"2":{"profId":260,"epId":2,"devId":4,"inClusterList":[3,4,5,6,57344,57345],"outClusterList":[],"clusters":{"genOnOff":{"attributes":{"onOff":1,"onTime":0,"offWaitTime":0}},"manuSpecificTuya_3":{"attributes":{"powerOnBehavior":2,"switchMode":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x70c59cfffe4846c6","endpointID":1}],"configuredReportings":[],"meta":{}},"3":{"profId":260,"epId":3,"devId":4,"inClusterList":[3,4,5,6,57344,57345],"outClusterList":[],"clusters":{"genOnOff":{"attributes":{"onOff":1,"onTime":0,"offWaitTime":0}},"manuSpecificTuya_3":{"attributes":{"powerOnBehavior":2,"switchMode":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x70c59cfffe4846c6","endpointID":1}],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":70,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{},"lastSeen":1764621281775}

Debug log

const {deviceEndpoints, onOff} = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
zigbeeModel: ['TS0726'],
model: 'TS0726',
vendor: '_TZ3000_kfkqkjqe',
description: 'Automatically generated definition',
extend: [deviceEndpoints({"endpoints":{"1":1,"2":2,"3":3}}), onOff({"powerOnBehavior":false,"endpointNames":["1","2","3"]})],
meta: {"multiEndpoint":true},
};

module.exports = definition;

Notes

No response

[Koenkk]

• Do you have any external converters? (you can find them in the z2m data dir)
• Could you provide a screenshot of the device about page on 1.42.0-2?

[ssrsmart]

• Do you have any external converters? (you can find them in the z2m data dir)
• Could you provide a screenshot of the device about page on 1.42.0-2?

no, I don't have any external converters

this is screenshots for the devices on 1,42.0-2 version

[Koenkk]

Added it!

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

[ssrsmart]

Added it!

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

Thanks a lot.

[ssrsmart]

Added it!

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

I updated z2m to the new release 2.7.1-1

For 1G and 2G still known as unsupported but relays is available and respond well, the state is flaky and there is no power behavior or scene switch.

3G and 4G have the same problems, in addition to that when one relay is controlled, the other relays take on the same state

[Koenkk]

Could you try to reconfigure the device via the frontend -> yellow refresh icon and see if that helps?

[ssrsmart]

Could you try to reconfigure the device via the frontend -> yellow refresh icon and see if that helps?

I tried to to delete and repair the device several times with no success, I have another ts0726 touch switch from different manufacturer also have the same issues.

this is the external definition of the touch switch

mport * as m from 'zigbee-herdsman-converters/lib/modernExtend';

export default {
zigbeeModel: ['TS0726'],
model: 'TS0726',
vendor: '_TZ3000_lcjsewlo',
description: 'Automatically generated definition',
extend: [m.deviceEndpoints({"endpoints":{"1":1,"2":2,"3":3}}), m.onOff({"powerOnBehavior":false,"endpointNames":["1","2","3"]})],
};

I tried to create an external converter with no success

noted: switches in old releases was working well with all function relay, state, scene, power behavior and backlight

[Koenkk]

Could you try to:

• Stop Z2M
• Open data/database.db with a text editor and change all occurrences of _TZ3000_lcjsewlo to _TZ3002_iedhxgyi
• Start Z2M, reconfigure device and see if the device now works

[ssrsmart]

Could you try to:

• Stop Z2M
• Open data/database.db with a text editor and change all occurrences of _TZ3000_lcjsewlo to _TZ3002_iedhxgyi
• Start Z2M, reconfigure device and see if the device now works

wow, I change the manufacturer name and now all functions available, Can you please provide me supported manufacturer name for 4G Switch, becouse this one only support 1G, 2G & 3G

[Koenkk]

For 4 gang change to _TZ3000_s678wazd (so I guess you will change _TZ3000_kfkqkjqe to _TZ3000_s678wazd)?