Open Source Mac Home Automation Software
Sort By:
Home Automation Software for Mac
View 1675 business solutionsBrowse free open source Home Automation software and projects for Mac below. Use the toggles on the left to filter open source Home Automation software by OS, license, language, programming language, and project status.
-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is detected. The low-duty cycle is used to minimize the amount of energy that the chip expends. The output of the power amplifier is also adjustable, thus contributing to an optimal trade-off between communication range, data rate and power consumption. The ESP32 series is available as a chip or module. You can use Arduino-ESP32 Online Documentation to get all information about this project. -
2
Home Assistant
Open source home automation that puts local control and privacy first
Home Assistant is a powerful open source home automation app that prioritizes local control and privacy. It offers great security and features while keeping your data securely out of the cloud. It can give you control of all your devices from a single, mobile-friendly interface and will track the state of all these devices so you don’t have to. Home Assistant is powered by a worldwide community and runs ideally on a Raspberry Pi or a local server. It can be set up to automatically control devices, so whether you want to be alerted when the lights turn on when you’re not at home, or want the lights to automatically dim when you start to watch a movie on Chromecast, Home Assistant can do it for you. See more examples on the official website: https://www.home-assistant.io/ -
3
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA. OpenMQTTGateway supports very mature technologies like basic 433mhz/315mhz protocols & infrared (IR) so you can make your old dumb devices "smart" and avoid throwing them away. These devices also have the advantage of having a lower cost compared to Zwave or more sophisticated protocols. OMG also supports up-to-date technologies like Bluetooth Low Energy (BLE) or LORA. -
4
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
Vibes don’t ship, Retool doesVibe coding tools create cool demos, but Retool helps you build software your company can actually use. Generate internal apps that connect directly to your data—deployed in your cloud with enterprise security from day one. Build dashboards, admin panels, and workflows with granular permissions already in place. Stop prototyping and ship on a platform that actually passes security review.
-
5
Homebridge
HomeKit support for the impatient
Homebridge is a lightweight NodeJS server you can run on your home network that emulates the iOS HomeKit API. It supports Plugins, which are community-contributed modules that provide a basic bridge from HomeKit to various 3rd-party APIs provided by manufacturers of "smart home" devices. Since Siri supports devices added through HomeKit, this means that with Homebridge you can ask Siri to control devices that don't have any support for HomeKit at all. Once your device has been added to HomeKit, you should be able to tell Siri to control your devices. However, realize that Siri is a cloud service, and iOS may need some time to synchronize your device information with iCloud. One final thing to remember is that Siri will almost always prefer its default phrase handling over HomeKit devices. For instance, if you name your Sonos device "Radio" and try saying "Siri, turn on the Radio" then Siri will probably start playing an iTunes Radio station on your phone. -
6
Homebridge Raspberry Pi Image
Homebridge Raspberry Pi Image based on Raspberry Pi OS Lite
This project provides a free Raspbian-based Raspberry Pi image with Homebridge and Homebridge Config UI X pre-installed. This image also provides a command called hb-config which helps you keep Node.js up-to-date, perform maintenance on your Homebridge server, and install additional optional software such as Pi Hole and deCONZ. The Homebridge service is installed using the method described in the Raspberry Pi Installation Guide on the Homebridge project wiki. The easiest way to flash the Homebridge Raspberry Pi Image to your SD card is to use the Raspberry Pi Imager. Raspberry Pi Imager will now download and flash the latest version of the Homebridge Raspberry Pi Image to your SD card, this may take several minutes depending on the speed of your internet connection and SD card. The Homebridge UI web interface will allow you to install, remove and update plugins, and modify the Homebridge config.json and manage other aspects of your Homebridge service. -
7
Homebridge UniFi Protect
Complete HomeKit integration for UniFi Protect with full support
Complete HomeKit integration for UniFi Protect with full support for most features including autoconfiguration, motion detection, and multiple controllers. homebridge-unifi-protect is a Homebridge plugin that provides HomeKit support to the UniFi Protect device ecosystem. UniFi Protect is Ubiquiti's video security platform, with rich camera, doorbell, and NVR controller hardware options for you to choose from, as well as an app which you can use to view, configure and manage your video camera and doorbells. This plugin attempts to bridge a gap in the UniFi Protect ecosystem by providing native HomeKit support on par with what you would expect from a first-party of native HomeKit solution. My north star is to create a plugin that just works with minimal required configuration by you to get up and running. The goal is to provide as close to a streamlined experience as you would expect from a first-party or native HomeKit solution. -
8
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and resources provide a walkthrough of the basics of PX4. PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box. The PX4 User Guide explains how to assemble supported vehicles and fly drones with PX4. See the forum and chat if you need help! -
9
Ring
Unofficial packages for Ring Doorbells, Cameras, Alarm System
This repo contains unofficial packages to enable interaction and automation with the majority of Ring products. The ring-client-API is a TypeScript package designed to be used by developers to create their own apps/programs which interact with Rings API. homebridge-ring allows users to integrate Ring products into Apple HomeKit via homebridge easily. With Ring you can control your home from your smartphone, tablet or PC. Each Ring device includes a camera, speakers, and an integrated microphone so you can view, listen, and speak to anyone on your property from anywhere. Ring's customizable motion sensors allow you to focus on the most important areas of your home. You will receive instant warnings as soon as your Ring device detects movement, so you are always the first to know if someone has gotten too close to your property. Ring allows you to monitor every corner of your property. -
Axe Credit Portal - ACP- is axefinance’s future-proof AI-driven solution to digitalize the loan process from KYC to servicing, available as a locally hosted or cloud-based software.Founded in 2004, axefinance is a global market-leading software provider focused on credit risk automation for lenders looking to provide an efficient, competitive, and seamless omnichannel financing journey for all client segments (FI, Retail, Commercial, and Corporate.)
-
10
Concourse
Concourse is a container-based continuous thing-doer written in Go
Built on the simple mechanics of resources, tasks, and jobs, Concourse presents a general approach to automation that makes it great for CI/CD. Concourse is designed to be expressive, versatile, and safe, remaining intuitive as the complexity of your project grows. A Concourse pipeline is like a distributed, continuous Makefile. Each job has a build plan declaring the job's input resources and what to run with them when they change. Your pipeline is then visualized in the web UI, taking only one click to get from a failed job to seeing why it failed. The visualization provides a "gut check" feedback loop: if it looks wrong, it probably is wrong. Jobs can depend on other jobs by configuring passed constraints. The resulting chain of jobs and resources is a dependency graph that continuously pushes your project forward, from source code to production. -
11
Homebridge Docker Image
HomeKit support for the impatient using Docker on x86_64
This Ubuntu Linux based Docker image allows you to run Nfarina's Homebridge on your home network which emulates the iOS HomeKit API. This is a multi-arch image and will run on x86_64, Raspberry Pi 2, 3, 4, Zero 2 W, or other Docker-enabled ARMv7/8 devices. Docker will automatically pull the correct image for your system. Homebridge requires full access to your local network to function correctly. This image will not work when using Docker for Mac or Docker for Windows. The parameters are split into two halves, separated by a colon, the left-hand side representing the host and the right container side. This image comes with the Homebridge UI pre-installed and is the easiest way to manage all aspects of Homebridge. Automated updates of the Homebridge Docker Image using tools such as Watchtower or similar are strongly discouraged and are done so at your own risk. You can update Homebridge, the Homebridge UI and the Node.js runtime from inside the container. -
12
homebridge-samsung-tizen
Homebridge plugin for Samsung TV's with Tizen OS
Homebridge Samsung Tizen is a plugin created for Homebridge that allows you to control your Samsung TVs (models starting from 2017) that are running Tizen Operating System. Please make sure to read our shiny documentation where you find step-by-step instructions with images on how to install and configure the plugin. If you find this plugin useful and want to show your support then please star this plugin, or better yet; you can donate through PayPal whatever you think the plugin value is. You can also use other methods by checking the Sponsor this project section from the right sidebar. This plugin was designed for Homebridge and will require you to set up a Homebridge server. Homebridge is a lightweight server you can run on your home network that emulates the iOS HomeKit API and allows you to control devices that are incompatible with HomeKit. -
13
OpenRemote
Open Source for Internet of Things
An Open Community in the Home Automation and Domotics space. We believe an Open Source approach can revolutionize the way people create, install, and maintain software in the industry. Our panel technology integrates with your favorite protocol and runtime hardware through Open Source software. We open up the front-end and support a unified panel and visual programming model. An installer can pick and choose hardware products from different vendors and still present one panel UI to the user. A proprietary hardware vendor can build modern panel support and integrate with existing vendors. Whether you are a DIY aficionado, a high-end installer, a hardware vendor or integrator, OpenRemote has something for you. We want to make OpenRemote the standard for commercial and hobbyist integration alike. We allow any integrator or vendor to write plug-ins and bring innovative tools that simplify the work of an installer and the relationship with the client. -
14
google-access-helper
google access helper
Google Access Assistant cracked version, Google over the wall, Google ladder, Google ladder extension tool, Google store access, Chrome over the wall. Since the new version of Chrome has prohibited the installation of third-party applications, and this cracked version cannot be uploaded to the Chrome Web Store , it can only be run in developer mode. Clone warehouse: Click to download and unzip after downloading the file. Directly modify and delete the js file to retain the function of overturning the wall, this cracked version has been simplified. This software has been cracked and can be used for free forever. -
15
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
16
HDMI-CEC Tray
Use your TV remote to control Windows applications
HDMI-CEC Tray allows to control any Windows application using your current TV remote. (*) http://sites.google.com/site/chir21/home/CEC-Tray (*) Requires the Pulse-Eight USB-CEC adapter. Check if your HDTV supports HDMI-CEC. No more hassle with dedicated mediacenter remote controls and special infrared or Bluetooth receivers for your HTPC. Instead, HDMI-CEC Tray makes use of your HDTV's built-in CEC technology to control your PC. You will be able to control Mediacenter, VLC, MPC-HC, MediaPortal or XBMC as well as Powerpoint, to name a few. With HDMI-CEC Tray, you can navigate your HTPC menus, play and pause music, or fast-forward movies using only the TV remote. It's even possible to make the TV power on and switch to the right HDMI input automatically every time your HTPC starts. -
17
ESP Easy
Arduino IDE sketch for ESP8266 modules
Firmware for ESP8266 modules. http://www.esp8266.nu/index.php/Tutorial_ESPEasy_Firmware_Upload Use an ESP8266 module as a wireless sensor for temperature, humidity, barometric pressure, LUX, etc. Or use it as an actuator to control Relays. Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: * DS18B20 * DHT11 * DHT22 * BH1750 * BMP085 * Wiegand RFID * PN532 * SI7021 * TSL2516 * HCSR04 * TSOP4838 IR * MCP23017 * PCF8591 * PCA9685 * LCD and OLED displays * BME280 * INA219 * MLX90614 * ADS1115 * MSP5611 * BMP280 * SHT1x The ESP is web configurable for both Wifi setup and device configuration. For support: - have a look at the wiki on www.esp8266.nu - join our forum on www.esp8266.nu/forum -
18
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library -
19
This project describing how to connect PC to Rego 600 heatpump controller (used in heatpumps IVT, Carrier, Bosch, AutoTherm, ...). This project describe hardware and also software part of interface.
-
20
Infra-red Remote Sampler
Infra-red Remote Control Sampling using FPGA
Infra-red Remote Control Sampling using FPGA -
21
Grasshopper Web App
Web App to control Bticino MyHome using OpenWebNet
Grasshopper is an open source and free (speech & beer) responsive-design web application to control Bticino MyHome. VALUES: Use any device Since Grasshopper is a browser-based application, you can use a browser on any device to access Grasshopper. Thanks to its responsive-design support, the Grasshopper interface will adapt to the screen-size of your device. Choice of server-platform Grasshopper is a web application that can run from different web servers. The Grasshopper appliance runs on DietPi with Lesp (Nginx+SQLite+PHP). The Grasshopper application has been tested on Lesp and LAMP+SQLite. (Both documented in following chapters). The only requirement is that SQLite is used as a database. You can read more about this in following chapters. Choice of MyHome Gateway Grasshopper can communicate not only through the official Bticino Gateways (eg. MH20x / F452 / F454) but also network-connected touchscreens can be used (eg. 3,5" / 10") -
22
-
23
freedomotic
Open IoT Framework
Freedomotic is an open source, flexible, secure Internet of Things (IoT) development framework, useful to build and manage modern smart spaces. It is targeted to private individuals (home automation) as well as business users (smart retail environments, ambient aware marketing, monitoring and analytics, etc). Freedomotic can interact with well known standard building automation protocols as well as with "do it yourself" solutions. It treats the web, social networks and branded frontends as first class components of the system. [GITHUB REPOSITORY] https://github.com/freedomotic/freedomotic [USERS' MANUAL] http://freedomotic-user-manual.readthedocs.io/ [DEVELOPERS' MANUAL] http://freedomotic-developer-manual.readthedocs.io/ [INTERNATIONAL COMMUNITY] https://groups.google.com/forum/#!forum/freedom-domotics [ITALIAN COMMUNITY] https://groups.google.com/forum/#!forum/freedomotic-it [REPORT AN ISSUE] https://github.com/freedomotic/freedomotic/issues -
24
jmpshcmd - smarthome command tool
java based cmd tool to connect different smarthome plattforms
This project is stopped at the moment because of very interesting parallel activities like openhab... ------------- In the smarthome area different systems and technologies can be found. If you want to use only one user interface for all devices you will not find the "right" tool. But there are different automation plattforms like homematic or openhab and often a scripting feature are available. The main idea behind jmpshcmd is a java based tool with support for missing features (like udpsend) or a simple way to integrate an automation standard (like homematic). This tool can used to start a command from a scripting exit. For testing issues a console mode is available. If you implement an own java based integration you can use the jmpshcmd features via Java based api. -
25
ACTIface (A Customizable TP-UART Interface) connects a PC to a KNX TP1 (EIB TP) network. It is built around a popular ASIC (the TP-UART) and optionally includes a microcontroller for improving communication with the PC (or standalone operation).
