Search Results for "driver"

...ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

...It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. A full documentation of the stack is available on the web site: http://openpowerlink.sourceforge.net The following page can be used to report a security vulnerability: https://sourceforge.net/p/openpowerlink/discussion/

5dpo Component Library for Lazarus (Sdpo) provides a comport (serial port) component, an UVC video driver component for webcams, a Gtk fast painting form and a Joystick component.

SoundStepper is a "100% software" telescope controller, for Windows, using audio hardware to control step motors at real time. All it requires to operate are external step motor drives, which can be a commercial "pulse/direction" drive or analog current amplifiers. Documentation: http://soundstepper.sourceforge.net/

XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels.

ArduRIO is a compilation of library's to recreate a RoboRIO simply with a Arduino (mega or uno) and an Ethernet shield. This supports FRC motor controllers, is controlled with a driver station on a laptop (just like FRC) and usb joysticks that plug into the laptop.

"Drone WayPointer" is a ROS package that provides a UI to allow for remote control of the Parrot AR Drone 2.0. It is developed in C++ with qt-ros and the Qt4 Development FrameWork. It is designed to work with the ROS - Fuerte and it uses the the ardrone_autonomy driver (Fuerte-devel Branch). It has so far only been tested on the tum_simulator and not on the actual drone. The main functionalities it provides is camera streams of front or bottom cameras of the drone, button and slider control of the drone XYZ velocities, control using waypoints and waypoint commands, pose estimation using simple dead-reckoning and measurement and image recording functionalities.

nxtOSEK is an RTOS for LEGO Mindstorms NXT. nxtOSEK consists of I/O driver part of LEJOS NXJ, TOPPERS/ATK1 RTOS, and glue code for them. You can write applications for NXT in ANSI-C/C++. Check nxtOSEK site: http://lejos-osek.sourceforge.net

The lpuck project attempts to bring an accessible open source Linux capable extension board to the popular "e-puck" robot from EPFL. Software provided gives easy access to the low level robot chassis, with an included Player driver.

...The simulator does not run native AVR files, but instead a thin wrapper is provided so that the AVR code can be compiled natively. Thanks to this wrapper, and a flexible Lua driver interface, the simulator emulates most of the IO registers, requiring no or minimal code modifications. rp6simul is primarily developed on Linux, but a Windows version will also be released.

This is a replacement of the old opencv unicap driver module that only supports the queue buffer interface. The new driver uses the more efficiente call-back interface and allows to use Imaging Source "one4all" DFM 22BUC03-ML board camera.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

the Java Vex Driver (JVD) is another method of controlling the Vex robot. Like JVex, it uses Java to control the Vex robot. it is designed to be as simple as possible and requires only that you download the default online code.

A Perl script that interfaces with the Devantech USB to I2C interface adapter. This script allows a user to read and write as a master to the i2c bus as well as set or get the value of the io pins.

Player plugin driver, PIC mictocontroler firmwares and Kical boards for my self-made robot.

A Player Project plugin driver for Mitsubishi's MELFA industrial robots. Allows direct movement control of the robot, as well as execution of arbitrary MELFA Basic commands and stored programs.

This is a Linux 2.6 driver for ISA, PC-104 and serial Indramat (aka BoschRexroth) CLC cards for SERCOS motion control. http://www.boschrexroth.com/country_units/america/united_states/en/products/brc/ProductDocumentation/LegacyProducts/Controls/index.jsp

USBMissileLauncher is user space Linux driver to control the the USB Missile Launcher (Vendor ID: 0x1130, Product ID: 0x0202) and/or the USB Circus Cannon (Vendor ID: 0x1941, Product ID: 0x8021) via the command line or keyboard (simple C implemenation).

A C++ driver to provide an interface to the Velodyne HD-64E Lidar

The goal is an Ascom driver for parallel port connected, telescope controlling stepper motors.

The parallel port PWM and/or encoder kernel space Linux driver allows open/closed loop control of motors using the parallel port.

An open-source Windowslibrary for low-level parallel port access. Does not require installation of any drivers. Emulates API of most commonly used solutions.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

This project is a Open Source C/C++ native Win32 implementation of a FIRST Driver Station written using Windows Template Library Code is a work in progress. Currently implements up to 4 real joysticks, 2 virtual joysticks, 8 Digital Input Buttons, 4 Analog Inputs. TODO: Voltage Display, 8 Digital Outputs and User LCD Display