Open Source Simulation Software

PICSimLab is a realtime emulator of development boards with MPLABX/avr-gdb debugger integration. PICSimLab supports microcontrollers from picsim, simavr, uCsim, qemu-stm32, qemu-esp32, and gpsim. PICSimLab has integration with MPLABX/Arduino IDE for programming the microcontroller's boards. As the purpose of PICSimLab is to emulate real hardware it does not have any source code editing support. For code editing and debugging the same tools used for a real board should be used with PICSimLab, such as MPLABX, Arduino IDE, or VSCode with PlatformIO. PICSimLab supports several devices (spare parts) that can be connected to the boards for simulation. Such as example LEDs and push buttons for simple outputs and inputs and some more complex ones like the ethernet shield w5500 for internet connection or the color graphic display ili9340 with touchscreen. The complete list of parts can be accessed in the documentation. Documentation at https://lcgamboa.github.io/picsimlab_docs/stable/

The aim of this project is to develop a cross-platform, Qt-based software to communicate through serial ports. This plugin-based software can be extended from a basic terminal to a more complete application, by adding features such as log abilities, data display through a graph, and so on.

Simulator for Siemens S7-200 PLC. It supports boolean operations, counters, timers, rise up and fall down contacts, and mathematics operations, with integer and real numbers, like sin, cos, tan. Comments and advise are well accepted!

Simple 8085 assembler and disassembler for educational use. The 8085asm generates the map file and intel hex file. It support the directives EQU, ORG, DB, DS and END.

OpenWave is a educational wave Simulator.

PIHMgis is a “tightly-coupled” GIS interface to Penn State Integrated Hydrologic Model (PIHM). It is open source, platform independent and extensible. The “tightly-coupled” integrated GIS interface to PIHM has been created in the Open Source QGIS

ART is a flexible simulation framework for wind instruments. It includes a growing library of modelling elements. So far bore discontinuities, branches, tone holes, cylindrical and conical tubes, Bessel horns and bent tubes are available for frequency domain modelling. In the time domain generic bidirectional propagation elements, scattering elements, fractional delays, convolution with reflection functions and general z-domain networks are available and can be described using MuParserX expressions. Cylindrical and conical ducts can also be defined based on their geometry. Available models and their parameters can be enumerated and combined to form simulators for complex acoustical structures. Parameters can be specified symbolically by expressions containing other parameter values or global variables. Dependencies between parameters are resolved at run time. However, MuParserX expressions are compiled at design time. Zero-delay loops are detected and reported.

Software Process Model Suite is a toolset for modeling and simulate software process models. Is composed by: 1. a simulator engine; 2. a modeling tool based on SPEM, that uses model transformation approach; 3. a visual graphical simulator.

AmazonTP is a GUI and API for automatic generation of power quality events by invoking the popular ATP (Alternative Transient Program).

Artist is a portable 2D graphics library. Main features are: drawing primitives, bitmap blitting, alpha blending, zoom and rotation, text rendering and image file loading. It uses hardware acceleration and provides a simple and elegent API.

It started as a simple physics API for educational purposes, but now its development is clearly focused on gaming and will be incorporated to a next-gen engine.

BabyTALK is to add another brick in the wall of natural languages learning. The baby needs to structure a corpus of texts when his tutor points and talks about a particular part of the corpus. The baby is also to describe any selected part of the corpus.

A cycle-accurate interconnection network simulator. Brought to you by the Concurrent VLSI Architecture group at Stanford University. The SourceForge website is no longer actively maintained. Instead, please follow the link in the profile.

DSPemu emule a digital signal processor TMS320F243, with console interface showing the registers and memory. With DSPemu is possible test algorithms such as Filter, FFT/IFFT. This can be integrate and used with a circuit simulator.

Folder is a tool to simulate and analyse the development of structures in mechanically layered media during layer parallel shortening or extension. It includes a graphical user interface that allows for easy designing of complex geometrical models, defining material parameters (including linear and non-linear rheology), and specifying type and amount of deformation. It also includes a range of features that facilitate the visualization and examination of various relevant quantities e.g. velocities, stress, rate of deformation, pressure, and finite strain. Folder contains a separate application, which illustrates analytical solutions of growth rate spectra for buckling and necking of a single viscous layer. Check out the companion paper: doi:10.1016/j.jsg.2016.01.001

Gravitation is an interactive program, which tries to simulate the dynamics of celestial objects in their mutual gravitational field.

JSim8086 is platform-independent Assembly Language Simulator of the Intel 8086 CPU. It was designed to be a learning tool (CAL) for first year Computing students who are learning Computer Systems Organisation and Assembly Programming.

A self-sufficient java framework for numerical solution of ODEs (diff eqs) and visualization. Samples are aeronautics/astronautics/physics/rocketry themed. Focus on clean design, modularity, reusability and documentation. Educational project.

Laboratory Circuit Simulator is transient simulator whiht analog and digital components support for laboratory classes. This support spice netlist files, DSP Tms320f243 DSPemu integration and has high customizable device modules development in c.

libLCS is a hardware description library in C++ aiming to be as powerfull and easy as the Verilog HDL. It currently supports logic gates, flipflops, clock, and facilitates delays, continuous assignments and variable value dumping into VCD files.

Simulador visual programable de arquitecturas hardware. Su intención en ayudar en el aprendizaje en centros universitarios.

MITSIM is a simulation-based laboratory developed for evaluating the impacts of alternative traffic management system designs at the operational level. It was developed at the MIT Intelligent Transportation Systems (ITS) Program.

The purpose of MoRe4ABM - Managing Ongoing RElationships for ABM - is to support representing and analysing social networks in agent-based modeling. The library provides a large number of network generators and a comprehensive framework for network and node level measures. It integrates well with Repast Simphony and uses the JUNG library. More4ABM furthermore supports initialisation of geographically explicit networks using GIS.

MobileStarChart is a MIDP1.0/2.0 midlet for Java-enabled mobile/cell phones or handheld device. It simulates whole sky at any point on earth with constellations, stars up to 6 mag, solar systems and some other celestial objects.

Ouroborus is an artificial life framework for mobile agents on a background of cellular automata. It can be used to teach and research topics such as population genetics, ecology and evolution. The demo includes a curses view and live Csound audio.