iCopy - Free Photocopier Activity
Print your copies using your scanner and printer as a photocopier
Brought to you by:
pincopallino
Activity for iCopy - Free Photocopier
-
LittleTyke modified a comment on discussion Help
I would like to install iCopy on Windows XP, but it has .NET Framework 4 Extended, which, according to information elsewhere, is the highest version of .NET Framework XP will support. Edit: One day later: I tried to run iCopy.exe on Windows XP, but Windows says: "iCopy.exe is not a valid Win32 application" so that's that.
-
I would like to install iCopy on Windows XP, but it has .NET Framework 4 Extended, which, according to information elsewhere, is the highest version of .NET Framework XP will support.
-
abu asma created ticket #378
1
-
xantho posted a comment on ticket #370
I think Post https://sourceforge.net/p/icopy/bugs/372/#8005/8071 should be your friend!
-
See https://sourceforge.net/p/icopy/bugs/372/#8005/8071
-
Had the same issue and analyzed it. FIX: change mainfrm.vb as follows: ADD the two lines after Line 387: ElseIf chkPDF.Checked = False Then opts.ScanOutput = ScanOutput.Printer The block should be afterwards like this: If chkSaveToFile.Checked Then opts.ScanOutput = ScanOutput.File If Not My.Settings.FileAskWhereToSave Then opts.Path = My.Settings.FileSavePath End If ElseIf chkPDF.Checked Then opts.ScanOutput = ScanOutput.PDF If Not My.Settings.PDFAskWhereToSave Then opts.Path = My.Settings.PDFSavePath...
-
/copy commandline argument (or scanner-button-assignment) not working if standard is PDF. WITH FIX
-
Vasya Pepkin posted a comment on ticket #372
I was able to fix the problem by deleting this folder: C:\Users\<username>\AppData\Local\icopy</username> P.S. After clicking the "Export to PDF" button, it is impossible after that to go back to "print to printer". "Export to PDF" button apparently messes up config files in the "C:\Users\<username>\AppData\Local\icopy " folder. The folder is not deleted by the uninstall. So even unistall/install fixes the issue. It would be nice if someone updated the program. </username> The patch provided DOES...
-
Tom Hickey created ticket #376
No Scanner Connected
-
Thomas Coye created ticket #375
iCopy does not fully open on screen
-
Rene Bosshard created ticket #374
ADF in Remote Desktop
-
Jon Hogan-Doran created ticket #373
EPSON DS-40 (USB Interface) - .NET Excpetion crashes system
-
sskmayu posted a comment on ticket #47
I really want to have this feature
-
I really want to have this feature
-
iCopy1.7.0 Fix the bug that cannot be copied after setting save file.
-
https://sourceforge.net/p/icopy/bugs/372/
-
iCopy1.7.0 Fix the bug that cannot be copied after setting save file.
-
Vizard posted a comment on ticket #51
Yes! Thanks for the program!!! Program is sinple, light .. and it performs its task perfectly!!!
-
YES!!!! It's cool and simpe ideya!!! simultaneously copy and save the image to some folder!
-
Dastageerkhanna posted a comment on discussion Help
@admin The current version is not working in Windows 11 could you please guide me little bit more.
-
Wayne Herrschaft posted a comment on ticket #371
Once I select scan to pdf it won't go back to the copier utility where I can scan directly to the printer. I love the program when it works
-
Once I select scan to pdf it won't go back to the copier utility where I scan directly to the printer. I love the program when it works
-
Barry created ticket #370
Output settings
-
hosenscheisser created ticket #53
when reopen running iCopy, bring to Foreground (without notification window )
-
Boardman created ticket #369
Register to scanner button fails
-
Delta Pharmacy posted a comment on ticket #363
same with mine
-
icopy experience a problem
-
mr
-
helal posted a comment on ticket #308
I can't print one page by scanning both pages. Example Scanning ID card first then scanning the back Can't print two on one page
-
Jeff E. Lewis created ticket #367
jlewis.icopy.brother.820
-
Matteo Rossi modified ticket #366
scanner
-
NONE
-
scanner
-
Michele Denber created ticket #365
Can't print in black and white
-
Evangelos Giap Michalas created ticket #43
SRS document
-
SRS document
-
Martin created ticket #364
Duplex Scan causes crash (HP ScanJet Pro 2500 f1)
-
James Miller posted a comment on discussion Help
Hi Jim, Your topic is not clear. Please let me know what exactly you are looking for. I feel like you've commented in an irrelevant thread. Hopefully, there is nothing to do with the vinyl speakers here. Regards: Audio Champion
-
Norbert created ticket #363
I can´t start iCopy
-
L.T. created ticket #362
text crippled in application window - after change to UHD monitor
-
Tobias posted a comment on ticket #357
There are more bugs like this. Windows 10.
-
"Remember image settings" does not work
-
"Default" button in image settings throws error
-
Cannot change image quality (slider disabled)
-
iCopy website missing on SourceForge
-
UI "Add Another Page" text half invisible
-
Dear Dawish, this should happen if you selected the option to register iCopy to the scanner buttons when installing it. When you press the button on the scanner, iCopy should then be listed in the available programs, and can be set as default. One can customize the behavior of this feature by looking at this page https://icopy.sourceforge.io/register-your-application-to-scanner-events/ Please let me know if you are able to obtain your desired feature.
-
Dawish Gupta posted a comment on discussion Help
Hello. Can iCopy function 'Fire-and-forget' style? I.e. 1. A user clicks 'Scan' button on a scanner. 2. That click INSTANTLY makes iCopy to order printing, so the user doesn't have to interact with the intermediate PC. P.S. Surprisingly many users (especially busy ones or elder ones) will definitely not use the software which requires unreasonable additional efforts (=problems). Thank you!
-
balamuruagn posted a comment on discussion Help
I will look into this and get back to you. On Wed, 16 Sep, 2020, 4:46 PM balamuruagn, murugand@users.sourceforge.net wrote: hi icopy software is working awesome for print and scan exordinary.....i need your help for how to interface with coin acceptor and your software .pl guide me as soon as possible iCopy does not find the printer https://sourceforge.net/p/icopy/discussion/716863/thread/48a2458d58/?limit=25#fb20 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/icopy/discussion/716863/...
-
hi icopy software is working awesome for print and scan exordinary.....i need your help for how to interface with coin acceptor and your software .pl guide me as soon as possible
-
hi icopy software is working awesome for print and scan exordinary.....i need your help for how to interface with coin acceptor and your software .pl guide me as soon as possible
-
jclifton created ticket #356
Can't print to printer after saving to PDF
-
Marc Dube posted a comment on ticket #355
Hi Matteo, This is the details of the error and a image of pop-up error. Thanks See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ** Exception Text ** System.ArgumentException: Value does not fall within the expected range. at WIA.ICommonDialog.ShowTransfer(Item Item, String FormatID, Boolean CancelError) at iCopy.Scanner.ScanNormal(ScanSettings settings) at iCopy.Scanner.Scan(ScanSettings options) at iCopy.appControl.Copy(ScanSettings options,...
-
Dear Marc, thank you for reporting your problem. What is the name of the error that you get? Can you paste it here? I'm afraid that it might be the type of error that I have never been able to solve with HP duplex scanners... Best Matteo
-
Crash with Duplex request on HP ScanJetPro 2000
-
jim mis posted a comment on discussion Help
I have the following mistakes while I try to carry out a test with Paint or different scanner: Unable to retrieve photograph from tool. Verify the tool is properly connected and strive once more See this publish:
-
s-r-grass created ticket #51
Thanks for the program!
-
aleks.ko created ticket #42
Russian translation 1.7
-
Chris Deuchar posted a comment on ticket #354
Ah, only one file can be attached at a time I see! Here is the .NET error log
-
Won't copy in colour - error created and system hangs
-
Dear Matthew, currently, iCopy doesn't store the selected number of copies on close, as I considered it to be a setting that changes frequently. You are the first user to ask about this, so I would suppose it is a specific request. If you really need to have 2 copies as default, I believe you should be able to modify the iCopy.settings file which is stored either in C:/Users/<Your username>/AppData/Local/iCopy or in the iCopy executable folder. There you should find a Copies parameter set to 1. Please...
-
Matthew Zeppenfeld posted a comment on discussion Help
I am trying to print 2 copies of any document that is scanned. Every time I close/open iCopy, it reverts to 1 copy. Is there a way to get this to save at 2?
-
Carlos Perez posted a comment on ticket #353
Hi... Just wondering ir there would be any advise for me, please. Thanks in advance.
-
Hi, I guess I first had the default .NET version that comes on W10 then for backwards compatibility with some old software I still need to use I had to install .NET FW 3.5 ... I believe I have both versiones installed, please correct me if I'm wrong.... Attaching current screenshots from my evidence. Thanks.-
-
Yes. Same error. This is the text generated after clicking OK on image I'm attaching... 03/03/2020 01:25:12 p. m. iCopy Version: 1.7.0.3 Windows Version: Microsoft Windows NT 6.2.9200.0 .NET Version: 4.0.30319.42000 WIA Device count: 1 Command Line parameters: /wiareg 03/03/2020 01:25:13 p. m. iCopy Version: 1.7.0.3 Windows Version: Microsoft Windows NT 6.2.9200.0 .NET Version: 4.0.30319.42000 WIA Device count: 1 Command Line parameters: /silent /reg 03/03/2020 01:25:22 p. m. iCopy Version: 1.7.0.3...
-
Martin Butter posted a comment on ticket #353
Hi Carlos, I'm not an expert on this, but it struck me that in your log it's always NET-Version 2.0 instead of NET 4.0, which it's in my log. Maybe it could help to upgrade NET Framework 4 as descriped in the icopy blog: https://icopy.sourceforge.io/icopy-1-7-released/
-
noszone posted a comment on discussion Help
I found in HP drivers ISIS Twain and installed it, however the same invertion. Also I tried to use a twain scan through Acrobat - it's okay. Again I've tried out with iCopy the res 75,150 and colors 8,16,32 bit. No luck.
-
Bit depth changing does not helping, Also saving to jpeg giving colors are inverted. Only two things allows make a properly scan - Set res to 300 and if I choose duplex scan. I noticied now, on second PC (Win7) where now scanner is connected (I do not remember if on 1st pc(winxp) if there was the same or not), there is no Twain interface availble. Only WIA. Could it lead to problem?
-
Bit depth changing does not helping, Also saving to jpeg giving colors are inverted. Only two things allows make a properly scan - Set res to 300 and if I choose duplex scan. I noticied now, on second PC (Win7) where now scanner is connected, there is no Twain interface availble. Only WIA.
-
Dear noszone, I'm sorry for the late reply. This problem really puzzles me as iCopy only takes the bitmap result from the scanner and saves it to PDF/sends it to printer. Also the fact that changing the resolution fixes the problem is weird. Have you tried changing the bit depth from the settings dialog? Also, can you please test if the color inversion happens also when printing or saving to file (not PDF)?
-
Dear carlos, sorry for my late response. Do you confirm that the error is the same also for version 1.7?
-
Only now I discovered that scanning in 300 dpi is okay, if I choose less - colors are inverted. Any ideas please? Due the size of pdf file when 300 dpi is a huge. Also I've tried out of use iCopy on other computer with Win7 OS, same result, colors are inverted.
-
Only now I discovered that scanning in 300 dpi is okay, if I choose less - colors are inverted. Any ideas please? Due the size of pdf file when 300 dpi is a huge.
-
Only now I discovered that scanning in 300 dpi is okay, if I choose less - colors are inverted. Any ideas please?
-
System.InvalidCastException: Specified cast is not valid
-
Pierre le Lidgeu modified a comment on ticket #352
I followed the steps described by Martin : he is completly right. Thx to him If iCopy behave as designed between "To PDF" and To file" (i.e. commute between both during the same session), it NEVER switch back dynamically to "To print". This is a MAIN bug as iCopy is not anymore a "copier" :o( By the way, I found a bypass (waiting for a fix). In the iCopy.setttings : 1- You put Printer in the two "ScanOutput" tags AND 2- You set :"<remembersettings>False</remembersettings>" (default is True) Doing...
-
I followed the steps described by Martin : he is completly right. Thx to him If iCopy behave as designed between "To PDF" and To file" (i.e. commute between both during the same session), it NEVER switch back dynamically to "To print". This is a MAIN bug as iCopy is not anymore a "copier" :o( By the way, I found a bypass (waiting for a fix). In the iCopy.setttings : 1- You put Printer in the two "ScanOutput" tags AND 2- You set :"<remembersettings>False</remembersettings>" (default is True) Doing...
-
I did some testing on this: Installing 1.70 and going back version by version, I experienced this issue with 1.70, 1.66, 1.65 and 1.64. Only as I went back to icopy 1.63 it worked as it should. I then compared the icopy-settings-files of these versions which I had preserved, in each case after I tried to switch back to the printer output and closed the program afterwards: in 1.70 and other cases where it is not possible to switch to the printer output, in the section "LastScanSettings" it reads <scanoutput>PDF</scanoutput>...
-
I did some testing on this: Installing 1.70 and going back version by version, I experienced this issue with 1.70, 1.66, 1.65 and 1.64. Only as I went back to icopy 1.63 it worked as it should. I then compared the icopy-settings-files of these versions which I had preserved, in each case after I tried to switch back to the printer output and closed the program afterwards: in 1.70 and other cases where it is not possible to switch to the printer output, in the section "LastScanSettings" it reads <scanoutput>PDF</scanoutput>...
-
I experienced this problem with version 1.6.5.
-
Hi Matteo ;-) I have EXACTLY ;o), the same problem than Stefan. :o( I migrated from 1.6 to 1.7 and "boum". Many thanks beforehand if you help us either to modify something somewhere, or with a patch/update to overcome that important problem : iCopy 1.7 is not properly working, in fact !! (Perhaps, ther is a mistake in the dynamic config file update when changing options ??) Pierre
-
Please somebody give me an idea, how to fix this sitatiion, please.
-
I can add, that if I choose double side scan in iCopy - this is no happens. Also attaching a log file.
-
I can add, that if I choose double side scan in iCopy - this is no happens.
-
Hi All, Scanning in color from ADF give me 2nd page colors are inverted. For example, on second page it converts blue color to green, on 3rd blue to red. Does not matter it's a jpeg or pdf. Same time, scanning from another software - no problems. HP Scanjet 6350. I am using a version 1.6.4.25. Cause the latest version 1.7 could not launch. Gives an error - is not a valid win 32 application on my Windows Xp Sp3, with netframework installed up version 4. Also, I've tried version 1.4 or so, both version...
-
Savas modified a comment on ticket #48
Hi Matteo I just realized I mixed some things up from what I previously repled to you. I've edited my post. Either way. Like I said, I am using a HP ENVY 5544 and the maximum scan size is 216 x 297 mm (8.5 x 11.7 inches). iCopy does NOT support this scan size area when selecting to export to PDF. Here's the full list. HP ENVY 5544 maximum scan size is 216 x 297 mm (8.5 x 11.7 inches). https://support.hp.com/gb-en/document/c04730912 p.s. Also I think "center image" (in the image settings) also means...
-
Hi Matteo I just realized I mixed some things up from what I previously repled to you. I've edited my post. Either way. Like I said, I am using a HP ENVY 5544 and the maximum scan size is 216 x 297 mm (8.5 x 11.7 inches). iCopy does NOT support this scan size area when selecting to export to PDF. Here's the full list. HP ENVY 5544 maximum scan size is 216 x 297 mm (8.5 x 11.7 inches). p.s. Also I think "center image" (in the image settings) also means auto cropping to where it thinks the paper stops?...
-
Hi Matteo Sorry for the late reply from me. I updated to the latest version (iCopy1.7.0setup.exe) to make sure I am not confusing anything. How do I do a log file? The feature request was to add a way to select the largest "paper size" on the list/options, rather than fixed paper sizes. So basically scan entire scannable area. However how does the "paper size" list work? Does it only show/filter what your scanner can do? Would it change depending on the printer? If that's the case then yes, if the...
-
Hi Matteo Sorry for the late reply from me. I updated to the latest version (iCopy1.7.0setup.exe) to make sure I am not confusing anything. How do I do a log file? The feature request was to add a way to select the largest "paper size" on the list/options, rather than fixed paper sizes. So basically scan entire scannable area. However how does the "paper size" list work? Does it only show/filter what your scanner can do? Would it change depending on the printer? If that's the case then yes, if the...
-
Hi Matteo Sorry for the late reply from me. I updated to the latest version (iCopy1.7.0setup.exe) to make sure I am not confusing anything. How do I do a log file? The feature request was to add a way to select the largest "paper size" on the list/options, rather than fixed paper sizes. So basically scan entire scannable area. However does the "paper size" list work? Does it only show/filter what your scanner can do? Would it change depending on the printer? If that's the case then yes, if the list...
-
Hi Matteo Sorry for the late reply from me. I updated to the latest version (iCopy1.7.0setup.exe) to make sure I am not confusing anything. How do I do a log file? The feature request was to add a way to select the largest "paper size" on the list/options, rather than fixed paper sizes. So basically scan entire scannable area. However does the "paper size" list filter only what your scanner can do? Would it change depending on the printer? If that's the case then yes, if the list isn't coming up...
-
Stefan Röwer created ticket #352
1.70
-
raybright posted a comment on discussion Help
Feature Request - Currently using version 1.7.0.3 Would like option to provide a password to open generated pdf files
-
Unhandled exception error when scan button clicked
-
The scanner and its driver need to be WIA compatible to be detected by iCopy (which is calling WIA API function in order to get the scanner list). As for the internal error, please attach a log file as explained in the FAQ.
-
French translation update for v1.6.6
-
Included in v1.7.0. Thank you!
-
iCopy 1.7 released
-
iCopy 1.7 released
1 >
