APPENDIX 2-1
Completion Type
Sizes of subsurface coiled tubing tools shall be compatible with the completion types as follows:Type 1 - Monobore Non-Selective Completion (Appendix 2-2)
Casing:
9-5/8 L80 43.5/47.0 lb/ft
Liner:
7 L80 26 lb/ft and 4-1/2 13CrL80 11.6 lb/ft
Tubing:
5-1/2 13Cr-L80 15.5 lb/ft, 5 13Cr-L80 13.0 lb/ft, 4-1/2 13Cr-L80 11.6 lb/ft.
Type 2 - Monobore Non-Selective Completion (Appendix 2-3)
Casing:
9-5/8 L80 43.5/47.0 lb/ft
Liner:
7 L80 26 lb/ft and 4-1/2 13CrL80 11.6 lb/ft
Tubing:
5-1/2 13Cr-L80 15.5 lb/ft, 5 13Cr-L80 13.0 lb/ft, 4-1/2 13Cr-L80 11.6 lb/ft, 27/8 13Cr-L80 6.4 lb/ft.
Type 3 - Single Selective Completion (Appendix 2-4)
Casing:
9-5/8 L80 43.5/47.0 lb/ft
Liner:
7 L80 26 lb/ft
Tubing:
4-1/2 13Cr-L80 11.6 lb/ft, 3-1/2 13Cr-L80 9.2 lb/ft.
Type 4 - Single Commingled Completion (Appendix 2-5)
Casing:
9 5/8 L-80 47.0/ 43.5 Lbs/ft
Liner:
7 L-80 26 Lbs/ft
Tubing:
5-1/2 13Cr L-80 15.5 Lbs/ft
Type 5 - Single Horizontal Completion with 8-1/2 Horizontal Open Hole with 5-1/2 ESS
(Appendix 2-6)
Casing:
9 5/8 L-80 47.0 Lbs/ft
Liner:
7 5/8 13Cr L-80 29.7 Lbs/ft .
Tubing:
5-1/2 13Cr L-80 15.5 Lbs/ft
Expandible Sand Screen: 5 120 ESS
APPENDIX 2-2
Type 1 Monobore Non-Selective Completion
0.25 Seamless Steel Control Line
5-1/2 Flow Coupling, 4.95 ID
5-1/2 Self-Equalizing Non-Elastometric TRSSSV, w/ Nipple Profile, 4.56 ID
5-1/2 Flow Coupling, 4.95 ID
5-1/2 13Cr-80 Tubing, 15.5 lb/ft, 5.905
Coupling OD, 4.950 ID, 4.825 Drift
5-1/2 to 5 Crossover, 4.95 ID
7 x 9-5/8 Liner Packer Hydraulic Set
Rotating Liner Hanger
5 to 4-1/2 Crossover, 4.00 ID
5 13Cr-80 Tubing, 13.0 lb/ft 5.364 Coupling
OD, 4.494 ID, 4.4.369 Drift
9-5/8 L-80 Casing, 43.5 lb/ft, 8.755 ID,
8.599 Drift
Anchor Seal Assembly 4.00 ID
7 Hydraulic Set Permanent Packer 4.00 ID
4-1/2 13Cr-80 11.6 lb/ft Tubing, 4.867 Coupling
OD, 4.000 ID, 3.875 Drift
Landing Nipple 3.81
Tieback Seal Assembly w/ Seals, 3.92 ID
7 x 4-1/2 Liner Hanger/ Packer, 4.00 ID
7 L-80 Liner, 26 lb/ft,6.276 ID, 6.151 Drift
Landing Nipple, 3.81 ID
Landing Nipple, 3.81 ID
Landing Nipple, 3.81 ID
Landing Collar
Shoe
4-1/2 13Cr-80 11.6 lb/ft Liner, 4.867
Coupling OD, 4.000 ID, 3.875 Drift
APPENDIX 2-3
Type 2 Monobore Selective Completion
0.25 Seamless Stainless Steel Control Line
5-1/2 Flow Coupling, 4.95 ID
5-1/2 Self-Equalizing Non-Elastometric TRSSSV, w/ Nipple Profile, 4.56 ID
5-1/2 Flow Coupling, 4.95 ID
5-1/2 13Cr-80 Tubing, 15.5 lb/ft, 5.905
Coupling OD, 4.950 ID, 4.825 Drift
5-1/2 to 5 Crossover, 4.95 ID
5 13Cr-80 Tubing, 13.0 lb/ft 5.364 Coupling
OD, 4.494 ID, 4.4.369 Drift
7 x 9-5/8 Liner Packer Hydraulic Set
Rotating Liner Hanger
5 to 4-1/2 Crossover, 4.00 ID
9-5/8 L-80 Casing, 43.5 lb/ft, 8.755 ID, 8.599
Drift
Anchor Seal Assembly 4.00 IDD
7 Hydraulic-set Permanent Packer 4.00 ID
4-1/2 13Cr-80 11.6 lb/ft Tubing, 4.867
Coupling OD 4.000 ID, 3.875 Drift
3.81 Seating Nipple
Tieback Seal Assembly w/ Seals, 3.92 ID
7 x 4-1/2 Liner Hanger/ Packer, 4.00 ID
7 L-80 Liner, 26 lb/ft,6.276 ID, 6.151 Drift
4-1/2 Permanent Packer 2.39 ID
NE Sliding Sleeve w/ Nipple Profile, 2.31 ID
O O O O
2-7/8 Blast Joint
2-7/8 13Cr-80 6.4 lb/ft Tubing, 3.297 Coupling OD
2.441 ID, 2.347 Drift
Casing Sealbore 3.81 ID,15-ft
Locator Tubing Seal Unit
NE Sliding Sleeve w/ Nipple Profile, 2.31 ID
2-7/8 Blast Joint
O O O O
Casing Sealbore, 3.81 ID, 15-ft
Tubing Seal Unit
2.23 No-Go Seating Nipple
Wireline Entry Guide
Landing Collar
Shoe
4-1/2 13Cr-80 11.6 lb/ft Liner, 4.867 Coupling
OD 4.000 ID, 3.875 Drift
APPENDIX 2-4
Type 3 Single Selective Completion
0.25 Seamless Stainless Steel Control Line
5-1/2 to 4-1/2 Crossover, 4.00 ID
4-1/2 Flow Coupling, 4.00 ID
4-1/2 Self-Equalizing, Non-Elastometric TRSSSV w/ Nipple Profile, 3.81 ID
4-1/2 13Cr-80 11.6 lb/ft Tubing, 4.867
Coupling OD 4.000 ID, 3.875 Drift
4-1/2 Flow Coupling, 4.00 ID
9-5/8 Hydraulic-Set Retrievable Packer
7 x 9-5/8 Hydraulic Set Rotating Liner
Hanger/Packer
9-5/8 L-80 Casing, 47 lb/ft, 8.68 ID, 8.525 Drift
4-1/2 NE Sliding Sleeve w/ Nipple Profile, 3.81 ID
O O O O
4-1/2 Blast Joint
7 Permanent Packer, 4.00 ID
Locator Tubing Seal Assembly w/ 3 Seal Stacks,
3.00 ID
Mill-out Extension
Sealbore Extension
3-1/2 20-ft Tubing Pup
3-1/2 X 2.81 Otis X Landing Nipple
3-1/2 20-ft Perforated Joints
3-1/2 X 2.75 Otis XN No-Go Nipple
3-1/2 Wireline Entry Guide
O O O O O O
O O O O O O
Note :
3-1/2 13Cr-80 9.2 lb/ft Tubing, 3.878 Coupling
OD 2.992 ID, 2.867 Drift
Landing Collar
7 L-80 Liner, 26 lb/ft,6.276 ID, 6.151 Drift
Shoe
APPENDIX 2-5
TYPE 4 Single Commingled Completion
Description
OD
(in)
ID
(in)
Flow Coupling
6.030
4.830
SP TR-SCSSV, SELF EQUALIZE, 4.562"
7.690
4.562
Flow Coupling
6.030
4.830
AHC 5-1/2" X 9-5/8" Hydraulic Set Retrievable Packer
8.300
4.900
5-1/2" X Nipple
5.920
4.562
Flow Coupling
6.030
4.840
5-1/2" XN-Nipple
5.920
4.455
Flow Coupling
6.030
4.840
Tie Back Seal Assembly
8.290
6.060
End of tubing
Top of Liner (Top of Receptacle)
8.270
7.500
NODECO TSP-
8.228
6.181
NODECO PHR LINER
8.307
6.220
NODECO HOLD DOWN SUB
8.346
6.220
CROSSOVE
7.640
6.220
26 x JOINTS OF 7" 26# JFE Fox BxP
7.625
6.875
LC LITE LANDING COLLAR
8.270
6.830
1 x JOINTS OF 7" 26# JFE Fox BxP
7.953
6.772
FLOAT COLLAR - SINGLE
7.953
6.772
1 x JOINTS OF 7" 26# JFE Fox BxP
6.875
7.625
20 Conductor
13-3/8 Casing
Maximum Well Angle = 56.81
20"
13-3/8"
A. 7" x 9-5/8" Liner Packer with 7.5" ID Seal Bore Ext.
9-5/8" Casing Shoe, L-80 , 47#
FLOAT COLLAR - SINGLE
7, 13Cr-80, 26#, Fox Liner
APPENDIX 2-6
TYPE 5 Single Horizontal Completion
5-1/2" SINGLE HORIZONTAL COMPLETION GAS PRODUCER
8-1/2" HORIZONTAL OPEN HOLE WITH 5-1/2" EXPANDABLE SAND SCREEN
Maximum Well Angle =91.23
Description
OD
(in)
ID
(in)
Flow
6.030
4.840
SP TR-SCSSV, SELF EQUALIZE, 4.562"
7.690
4.562
Flow
6.030
4.840
AHC 5-1/2" X 9-5/8" Hydraulic Set Packer
8.300
4.900
5-1/2" X Nipple
5.984
4.562
Mirage Plug
7.020
4.994
Flow
6.030
4.840
5-1/2" XN-
5.920
4.455
Flow
6.030
4.840
Tie Back Seal Assembly
8.290
6.060
20 Conductor
13-3/8 Casing
20" Conductor
13-3/8" Surface Casing
9-5/8" Production Casing L-80, 47.0 lb/ft, ID 8.681"
Drift ID 8.525"
5-1/2" Tubing 13Cr80 15.5#, ID 4.950", Drift ID 4.825", FOX
End of Tubing
A
A- 9-5/8" X 7-5/8" EXR Tie Back Receptacle
8.135
7.375
B- 9-5/8" X 7-5/8" EXR ESS Deployment Packer
8.400
6.800
C- X-over, 7-5/8" 29.7 # Vam FJL Box X 7-5/8" 29.7#
7.626
6.875
Fox Pin, 13Cr L-80
D- 7-5/8" 29.7# L80-13Cr, Fox Box x Pin x 15ft Pup Joint
8.178
6.875
E- 7-5/8" 29.7 # L80-13Cr, Fox Blank Pipe x 34 Joints
8.178
6.875
F- 7-5/8" 29.7# L80-13Cr, Fox Box x Pin x 8ft Pup Joint
8.178
6.875
G - X-over, 29.7 # Fox Box X 7-5/8" 29.7 # Vam FJL Pin
8.178
6.815
H- 5-1/2" 120 ETC 316L SS
7.638
4.803
I - 5-1/2" 120 ESS x 48 Joints
8.500
7.279
J- 5-1/2" 120 10ft EBC
5.744
7.279
K- 5-1/2" Bullnose 420 13Cr SS
6.063
Producing Interval:
G H
`````````````````````````````````````````````````````````````````````````
`````
===============
= = = = = = = = = = = = ===
====
= = = = = = = = = = = = ====
`````````````````````````````````````````````````````````````````````````
````
8-1/2" Open hole horizontal section
9-5/8" Casing Shoe,
13Cr L-80
End of Bull
APPENDIX 2- 7
Helang/Layang Field Reservoir and Well Conditions
Completion
Well Type
Reservoir
Formation Fluid
Rate Per string, MMscf/day
Reservoir Pressure (max), psia
Tubing Head Shut-in Pressure (max), psia
Tubing Head Flowing Pressure, psia
Reservoir Temperature (max), F
Tubing Head Flowing Temperature, F
CGR, STB/MMscf
Condensate Gravity, API @60 F
Carbon Dioxide, mole %
Hydrogen Sulfide, ppm
Chloride Content, mg/l
Acidity, PH
Completion Fluid
Packer Fluid
Completion
Well Type
Reservoir
Formation Fluid
Rate Per string, MMscf/day
Reservoir Pressure (max), psia
Tubing Head Shut-in Pressure (max), psia
Tubing Head Flowing Pressure, psia
Reservoir Temperature (max), F
Tubing Head Flowing Temperature, F
CGR, STB/MMscf
Condensate Gravity, API @60 F
Carbon Dioxide, mole %
Hydrogen Sulfide, ppm
Chloride Content, mg/l
Acidity, PH
Completion Fluid
Packer Fluid
Type 1 & 2
Gas Producer
Cycle VI Lower
Gas
15-40
3000
2200
2000
270
180
10-40
60
3
Less than 1
1500
4.8 - 6.2 at 25 C
Filtered Seawater + 3%
KCl
Up to 3% KCl-NaCl
brine system treated
with O2 scavenger +
bactericide + corrosion
inhibitor.
Type 3
Gas Producer
Cycle VI Middle
Gas
8-20
2900
2300
1900
210
140
30-50
60
1
Less than 1
1200
5.3 5.5 at 25 C
Filtered Seawater + 3% KCl
Type 4
Gas Producer
Cycle VI Lower
Gas
12-30
4500
3200
2900
270
170
10-170
47-60
2
Less than 1
6000
5.7 at 20 C
3% KCL Brine
NaCl brine system
Type 5
Gas Producer
Cycle VI Middle
Gas
15-40
3100
2400
2300
210
160
30-60
60
1
Less than 1
4000
7.6 at 20 C
Saraline 185V + NaCl Brine
NaCl brine system treated
treated with O2 scavenger
+ bactericide + corrosion
inhibitor.
with O2 scavenger +
bactericide + corrosion
inhibitor.
Up to 3% KCl-NaCl brine
system treated with O2
scavenger + bactericide +
corrosion inhibitor.
APPENDIX 2- 8
SK333 Reservoir Conditions
Maximum Reservoir Pressure (psia)
Maximum BH Temperature (Deg F)
Formation Fluid
CO2
H2S
13,000
350
Oil/Gas
25.2%
<1%
