Scribd
Upload
315 views1 page

Hydrocyclone Cone Specs & Dimensions

This document provides specifications for three types of hydrocyclone cones used to separate materials by particle size: 12-inch, 10-inch, and 4-inch cones. It lists the nominal diameter, material, flow capacity range, typical particle size cut points in water and drilling fluid, weight, and frequently used configurations including number of cones, system capacity, required head pressure, and dimensions for desander and desilter applications using the different cone sizes.

Uploaded by

ptombel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
315 views1 page

Hydrocyclone Cone Specs & Dimensions

This document provides specifications for three types of hydrocyclone cones used to separate materials by particle size: 12-inch, 10-inch, and 4-inch cones. It lists the nominal diameter, material, flow capacity range, typical particle size cut points in water and drilling fluid, weight, and frequently used configurations including number of cones, system capacity, required head pressure, and dimensions for desander and desilter applications using the different cone sizes.

Uploaded by

ptombel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Cone Specifications and Dimensions

12-Inch
10-Inch 4-Inch
Nominal Inner
Diameter
12 in (305 mm) 10 in (254 mm) 4 in (102 mm)
Material Cast Urethane Cast Urethane Cast Urethane
Capacity 500 gal/min (1893 lit/min) to600 gal/min (2271 lit/min) 400 gal/min
(1514 lit/min)
to500 gal/min
(1893 lit/min)
50 gal/min (189
lit/min) to65
gal/min (246
lit/min)
D50 Cut Point
in Water
60-80m 50-70m 15-20m
D50 Cut Point
in Drilling
Fluid
200m 90-120m 35-70m
Weight Each 105 lb (48 kg) 85 lb (39 kg) 13 lb (6 kg)
All hydrocyclones require 75 feet of head; D50 is dependent on the feed particle size.
Frequently Used Configurations

12-Inch Cone Desander 10-InchCone
Desander
4-InchCone
Desilter
Number of
Cones
2 2 16
Capacity Up to 1200 gal/min (4542 lit/min) Up to 1000
gal/min (3785
lit/min)
Up to 1040
gal/min (3936
lit/min)
Req'd Head 75 ft (22.9 m) 75 ft (22.9 m) 75 ft (22.9 m)
Dimensions (L
x W x H)
42 in x 41 in x 81 in
(1067 mm x 1041 mm x 2057 mm)
40 in x 36 in x
79.5 in
(1016 mm x 914
mm x 2019 mm)
87 in x 32 in x
62 in
(2209.8 mm x
813 mm x 1575
mm)
Weight 800 lb (363 kg) 780 lb (354 kg) 1065 lb (484 kg)

You might also like