PHILTEX/RYTON COMPLEX PIPING SPECIFICATION
MINIMUM C/A: 1/16"
MIN NDE: 100%
PRESSURE/TEMPERATURE
LIMITATIONS:
SIZE
FLANG
ES
(35)
(42)
ASME
150 (1)
FITTIN
GS
ELL,
TEE,
RED,
CPLGSINLINE
(1)
&
ASME CLASS 150
1
SW - A105 RF PRF'D
WN - SCH 80 ASME 300
SE - DO NOT USE
A105 RF
WN
SCH 80
ASME 300
A105 RF
WN
SCH 40
ASME
300
A234
WPB
SCH 40
XXXXX
SPECIFICATION NUMBER:
15CSTL-NA
SERVICE: ASME CLASS 150 NACE
MAXIMUM HARDNESS: 235 Bhn
STRESS RELIEF: ALL WELDS (36)
HYDROSTATIC TESTING: YES
MEETS CODE(S): ASME B31.3 /
NACE MR-01-75
COLOR:
PHILTEX/RYTON SPEC
10
A105 RF
WN
SCH 40
SW- A105 3000# PRF'D
A234
SE - A105 3000# DO NOT USE
WPB
EXCEPT FOR VENTS, DRAINS, AND
SCH 80
EXISTING EQUIPMENT
BW- A234 WPB SCH 80
SW-A105 3000# PRF'D
XXXXX
XXXXX
SE-DO NOT USE EXCEPT FOR
EXISTING EQUIPMENT
USE THE TABLE IN SECTION 3.6 OF THE APPLICATION GUIDELINES
12
A105 RF
WN
STD
XXXXX
XXXXX
XXXXX
A234
WPB
STD
XXXXX
DATE: 6/9/04
14
16
18
XXXXX
XXXXX
20-24
A105 RF
WN PRF'D / STD
XXXXX
XXXXX
BRANC
H
CONNE
PIPE SEAMLESS UNLESS OTHERWISE SPECIFIED BY PHILLIPS DESIGN ENGINEERING--COAT AND WRAP BURIED PIPE
SIZE
&
NIPPLE
(17)
A106 B SCH 80 SMLS (5
SE
(5)
SE DO NOT USE EXCEPT TO
MATCH, VENTS, DRAINS, AND
A106 B SCH 80 SMLS
SE DO NOT USE EXCEPT TO MATCH,
VENTS, DRAINS, AND EXISTING PIPE
CONNECTION.
A106 B
BW /
SW
SCH 80
SMLS
WELDOLET & BW ELBOLET 2 IN
(5)
12
14
16
18
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
A105 SCH 80
A106 B
SCH 40
SMLS
10
A106 B STD SMLS / A 53 B STD EFW
BOLTING MATERIAL
WELDOLET & BW ELBOLET 3 IN 6 IN
A105 SCH 40
NUTS
SOCKOLET & SW ELBOLET
A105 3000#
GASKETS
PLUGS, SOLID, ROUND HEAD
BUSHINGS
UNIONS
SWAGE NIPPLE FOR 2 IN PIPE
A105 (6) (15)
A105
(16)
FLANGES PRF'D / A105 3000#
A234 WPBN SCH 160
20-24
TUBING (1/2 & SMALLER)
SWAGELOK TUBING FITTINGS
THREAD COMPOUND
THERMOWELL CONNECTION
(1) A193 B7M WITH GREEN XYLON 1014 OR 1424
COATING PRF'D
(2) A193 B8M CLASS II STUD BOLTS
(3) NEVER MIX B8M & B7M.
A194 2H HEAVY HEX NUTS / A194 2H HEAVY HEX
NUTS WITH GREEN XYLON 1014 OR 1424 COATING:
USE COATED NUTS ONLY WITH COATED BOLTS
(1)CORRUGATED 316SS W/GRAPHITE PRFD. IDT
WD-20, J M CLIPPER ELASTOGRAPH, GARLOCK
GRAPHONIC ALL ACCEPTABLE.
(2)IN AREAS WHERE GRAPHONICS GASKETS WILL
NOT ACCOMMODATE FLANGE CAP USE SPIRAL
WOUND 316 SS WITH GRAPHITE FILL
(3)USE GRAPHONICS WITH NICKEL 200 AT RYTON
316 STAINLESS STEEL ( .035 WALL )
316 STAINLESS STEEL
GLADIATOR PASTE PRF'D / RECTORSEAL / VIRGIN
TEFLON
SOCKOLET / SW ELBOLET PRF'D or FLANGED PFRD
316 THERMOWELL PRF'D
Philtex/Ryton Mechanical Design Engineering must approve any exceptions to these specifications for any job on a case-by-case basis.
15CSTL-NA
REV: 2
SPECIFICATION NUMBER: 15CSTL-NA
SERVICE: ASME CLASS 150 NACE
DATE: 6/9/04
PHILTEX/RYTON COMPLEX PIPING SPECIFICATION
Valves listed below are preferred Consult the Phillips Design Engineering Standards for the other acceptable alternatives.
Orbit valves are considered a specialty item consult engineering.
SIZE
GATE
NACE
OS&Y
-1
BODY MATERIAL
TRIM MATERIAL
PACKING MATERIAL
BONNET CONSTRUCT
END CONNECTION
NOTES
CHECK
NACE
(14) (25)
BODY MATERIAL
TRIM MATERIAL
SPRING MATERIAL
END CONNECTION
NOTES
BUTTERFLY
FIRESAFE
API 607
API 608
(25)
BODY MATERIAL
TRIM MATERIAL
PACKING MATERIAL
END CONNECTION
NOTES
BALL
FIRESAFE
API 607
API 608
NACE
BODY MATERIAL
TRIM MATERIAL
PACKING MATERIAL
SEAT MATERIAL
END CONNECTION
NOTES
PLUG
FIRESAFE
API 607
NACE
BODY MATERIAL
PLUG MATERIAL
SLEEVE MATERIAL
END CONNECTION
NOTES
GLOBE
NACE
BODY MATERIAL
TRIM MATERIAL
PACKING MATERIAL
BONNET CONSTRUCT
END CONNECTION
NOTES
A105 (800#)
316 SS HF PRF'D
GRAPHITE (23)
WELDED / BOLTED -B7M
W/ 2HM NUTS
FE PRF'D / ASME 300
API 602 (6)
A105
13% CHROME SS HF
FE PRF'D / ASME 300
A105
31S SS HF PRF'D
GRAPHITE (23)
BOLTED - B7M W/ 2HM NUTS
A105
13% CHROME SS HF
GRAPHITE (23)
BOLTED - B7M W/ 2HM NUTS
ASME 300 FE
API 600
A216 WCB
410 SS
N/A / INCONEL X-750
ASME 300 FE
SWING / WAFER
FE
API 600
A216 WCB
410 SS
INCONEL X-750
FE
WAFER
USE BALL OR GATE
VALVE
USE BALL OR GATE VALVE
USE BALL VALVE
A105
316 SS
TEFLON
GLASS FILL TEFLON
FE-ASME 300 MAX.
TEMP 400
MODEL: JAMESBURY
FE 5300N-31-2236XT
PRFD
SE 9FBN-2236XT
A105
316 SS
TEFLON
SE / FE-ASME 300
PRF'D
MAX. TEMP 400
A216 WCB
316 SS
TEFLON
GLASS FILL TEFLON
ASME 300 FE
MAX. TEMP 400
MODEL: JAMESBURY 5300N-31-2236XT
A216 WCB
316 SS
TEFLON
GLASS FILL TEFLON
FE
MAX. TEMP 400
MODEL: JAMESBURY 5150N-31-2236XT
A215 WCB
316 SS
TEFLON
ASME 300 FE
MAX. TEMP 400
A216 WCB
316 SS
TEFLON
FE
MAX. TEMP 400
A105 (800#)
13% CHROME SS HF
GRAPHITE (23)
BOLTED - B7M W/2HM
NUTS
SW / FE PRF'D / ASME
300
A216 WCB
13% CHROME SS HF
GRAPHITE (23)
BOLTED -B7M W/2HM BUTS
ASME 300 FE
A216 WCB
13% CHROME SS HF
GRAPHITE (23)
BOLTED-B7M W/2HM BUTS
FE
8 12
14 - 24
NOTES
(1) Use socket weld fittings except in areas where welding is not permitted.
(5) All first take-off piping threaded nipples 1/2" to 1 1/2" to first block valve(s) shall be schedule 160 and stamped "160" .
(6) Atmosphere vent and drain valves must be 1", have SE construction on the atmospheric end and must have a solid round plug threaded into it (1/2" on level gage bridles).
(14) Use only spring loaded check valves in vertical lines. Do not install any check valve with normal flow direction being down.
(15) No hexagonal head or hollowed out plugs allowed.
(16) Bushings to be minimum of two size reductions.
(17) No all thread nipples allowed.
(23) Valves shall have die formed graphoil, rings with braided graphite wiper ring top and bottom, with corrosion inhibitor.
(25) Equipment installed between flanges, i.e., wafer butterfly and check valves and some control valves, require fire insulation or shielding of the flange bolts.
(35) For slip-on flanges, leave a 1/4" gap on the back weld or drill an 1/8" hole from the backside to the bore for hydrogen gas to escape.
(36) Butt welds, Weldolets, Threadolets, and Slip on flanges will be stressed relieved. Sock weld piping is not required to be stress relieved.
(42) Slip-on flanges are to be used only on existing sulfur contaminated piping.
