Scribd
Upload
159 views6 pages

Simple Machines for Form 2 Students

This document provides information about simple machines, specifically levers. It explains that there are three classes of levers: first, second, and third class. Each class is defined by the relative positions of the fulcrum, load, and effort. The first class lever has the fulcrum between the load and effort. The second class lever has the load between the fulcrum and effort. The third class lever has the effort between the fulcrum and load. Examples are given for each class. The principle of moments for levers is also described, stating that the load multiplied by its distance from the fulcrum equals the effort multiplied by its distance from the fulcrum.

Uploaded by

Cerdik Cekap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views6 pages

Simple Machines for Form 2 Students

This document provides information about simple machines, specifically levers. It explains that there are three classes of levers: first, second, and third class. Each class is defined by the relative positions of the fulcrum, load, and effort. The first class lever has the fulcrum between the load and effort. The second class lever has the load between the fulcrum and effort. The third class lever has the effort between the fulcrum and load. Examples are given for each class. The principle of moments for levers is also described, stating that the load multiplied by its distance from the fulcrum equals the effort multiplied by its distance from the fulcrum.

Uploaded by

Cerdik Cekap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Science Form 2 note

Teacher zaidi@maher2010

CHAPTER 10: SIMPLE MACHINE


1.
2.

(PMR 2008/8a,b,c)

Simple machines are devices that make work easier.


The diagram below shows a lever. It consists of bar
which rests on a point called the fulcrum (F). The
point where forces act is called the load (L) and the
point where we use our force is called the force (F)
or effort (E).
LOAD

FULCRUM
3.

4.

FORCE

There are three classes of levers.


a. first class lever
b. second class lever
c. third class lever
First class lever:
i. The fulcrum is between the force (Effort) and
the load.
ii. The effort and the load act in the same
direction, that is downwards on the rod.
iii. To make work easier, the distance of load
should be shorter than the distance of effort.
Thus, a heavy load is moved by a small effort.
iv. Some examples are scissors, pliers, crowbar and
hammer.

FORCE

FULCRUM

LOAD

Science Form 2 note

Teacher zaidi@maher2010

Draw figure 10.3 page 89


5.

Second class lever:

http://www.treca.org/staff/voss/pages/2ndclass.html
i.. The load is between the fulcrum and the force.
ii. The load and effort act in opposite directions.
iii. To make work easier, the distance of effort must
be longer than the distance of load. Thus, a
heavy load is moved by a small effort.
iv. Some examples are wheelbarrow, nut cracker,
bottle opener, opening the hood of a car and
paper cutter.
FORCE

FULCRUM

LOAD

Draw figure 10.5 page 90

6.

Third Class lever:


i.. The force is between the load and the fulcrum.
ii. The load and effort act in opposite directions.
iii. To make work easier, the distance of effort
must be shorter than the distance of load. Thus,
a small load is moved by a large effort.

Science Form 2 note

iv.

Teacher zaidi@maher2010

Some examples are ice tongs, fishing rod,


broom, stapler, knife, golf, forceps, badminton
racquet and our forearm.
FORCE

FULCRUM

LOAD

Draw figure 10.7 page 90


7.

Principle of levers

Go to www.pbs.org/wsbh/nova/lostempires/obelisk/ and click on `lever and obelisk to raise


an obelisk using a simple machine. For easy access, go to www.icd.com.my
Load X Distance of the load from fulcrum = Force X Distance of the force from fulcrum.

L X DL = F X DF
8.
9.

Moment of force = Force X perpendicular distance from the pivot to force.


moment = F X D

PIVOT
X

FORCE

Science Form 2 note

Teacher zaidi@maher2010

Draw figure 10.9 page 91


10. Principle of moment:
X

LOAD

FULCRUM

FORCE

When lever is in equilibrium,


Load X Distance of the load from fulcrum = Force X Distance of the force from fulcrum.

L X DL = F X DF
@
L X DL = E X DE

Science Form 2 note

Teacher zaidi@maher2010

Comparison between the different classes of lever


model

first class
lever

second class
lever
E

third class
lever
E

model

L
centre
position
direction in
which the
load (L) and
effort (E) act

Fulcrum

load

L and E act in L and E act in L and E act in


the
same the opposite the opposite
directions
direction
directions

pliers, (PMR 2008)


scissors, (PMR
2008)

Examples

effort

bottle
opener, (PMR

claw hammer,
chemical
2008)
balance,
wheelbarrow,
weighing
nutcracker,
scale,
paper cutter,
see saw,
hoe

ice tongs,

(PMR

2008)

forceps,
broom,
fishing rod,
badminton
racquet,
golf club,

Science Form 2 note

Teacher zaidi@maher2010

You might also like