Construction
Equipment
Submitted by:
Ashish parihar
Hunsraj
bhalekar
Submitted to:
Alok rarotiya
construction equipment
Introduction
In the case of huge construction projects;
Proper use of the appropriate equipment contributes to
economy, quality, safety, speed and timely completion of a
project.
Equipment are use for highway projects, irrigation,
buildings, power projects etc.
15-30% of total project cost has been accounted towards
equipment and machinery.
CONSTRUCTION EQUIPMENT
Classification of Construction Equipment
1.
2.
3.
4.
5.
6.
7.
8.
Earth-moving equipment
Hauling equipment
Hoisting equipment
Conveying equipment
Aggregate and concrete production equipment
Pile-driving equipment
Tunneling and rock drilling equipment
Pumping and dewatering equipment
CONSTRUCTION EQUIPMENT
Operations involved in construction
of any project
Excavation
Digging of large quantities of earth
Moving them to distances which are sometimes fairly long
Placement
Compacting
Leveling
Dozing
Grading
Hauling
CONSTRUCTION EQUIPMENT
EXCAVATING AND EARTH MOVING EQUIPMENT
Power shovel
Back hoe
Drag line
Clam shell
Scrapers
Bull dozer
CONSTRUCTION EQUIPMENT
POWER SHOVEL
To excavate the earth and to load the trucks
capable of excavating all types of earth except
hard rock
size varies from 0.375m3 to 5m3 .
Basics parts of power shovel including the track
system, cabin, cables, rack, stick, boom foot-pin,
saddle block, boom, boom point sheaves and
bucket.
CONSTRUCTION EQUIPMENT
APPLICATIONS
Suitable for close range of work
Capable of digging very hard materials,
can remove big sized boulders.
It is used in various types of jobs such as digging
in gravel banks, clay pits, digging cuts in road
works, road-side berms, etc.
CONSTRUCTION EQUIPMENT
Factors affecting output of power shovel
Class of material
Depth of cutting
Angle of swing
Job condition
Management condition
Size of hauling units
Skill of the operator
Physical condition of the shovel
CONSTRUCTION EQUIPMENT
OLD NEW
CONSTRUCTION EQUIPMENT
BACK HOE
Also known as hoe, back shovel and pull shovel
It is used to excavate below the natural surface on which
it rests.
Generally used to excavate trenches, pits for basements
and also for grading works, which requires precise control
of depths.
The basic parts are boom, Jack boom, Boom foot drum,
Boom sheave, Stick sheave, Stick, Bucket and Bucket
sheave
CONSTRUCTION EQUIPMENT
10
Back hoe
CONSTRUCTION EQUIPMENT
11
Application
It is the most suitable machine for digging below the
machine level, such as, trenches, footings, basements etc.
It can be efficiently used to dress or trim the surface
avoiding the use of manual effort for dressing the
excavated the surface.
CONSTRUCTION EQUIPMENT
12
Drag line
The drag line is so name because of its prominent operation of
dragging the bucket against the material to be dug.
Unlike the shovel, it has a long light crane boom and the bucket is
loosely attached to the boom through cables.
Because of this construction, a dragline can dig and dump over larger
distances than a shovel can do.
Drag lines are useful for digging below its track level and handling
softer materials.
The basic parts of a drag line including the boom, hoist cable, drag
cable, hoist chain, drag chain and bucket.
CONSTRUCTION EQUIPMENT
13
Application
It is the most suitable machine for dragging softer material
and below its track level
It is very useful for excavating trenches when the sides are
permitted to establish their angle of repose without
shoring.
It has long reaches.
It is mostly used in the excavation for canals and
depositing on the embankment without hauling units.
CONSTRUCTION EQUIPMENT
14
DRAG LINE
CONSTRUCTION EQUIPMENT
15
Clam shell
This is so named due to resemblance of its bucket to a
clam which is like a shell-fish with hinged double shell.
The front end is essentially a crane boom with a specially
designed bucket loosely attached at the end through cables
as in a drag line.
The capacity of a clam shell bucket is usually given in
cubic meters.
The basic parts of clam shell bucket are the closing line,
hoist line, sheaves, brackets, tagline, shell and hinge.
CONSTRUCTION EQUIPMENT
16
Application
Used for handling loose material such as crushed stone,
sand, gravel, coal etc.
Main feature is vertical lifting of material from one
location to another.
Mainly used for removing material from coffer dam,
sewer main holes, well foundations etc.
CONSTRUCTION EQUIPMENT
17
CLAM SHELL
CONSTRUCTION EQUIPMENT
18
Comparison between different types of equipment
s.no.
Items of comparison
Power shovel
Back hoe
Drag line
Clam shell
Excavation in hard soil or
rock
Good
Good
Not good
Poor
Excavation in wet soil or
mud
Poor
Poor
Moderately good
Moderately good
Distance between footing
and digging
Small
Small
Long
Long
Loading efficiency
Very good
Good
Moderately good
Precise but slow
Footing required
Close to work
Close to pit
Fairly away from
pit
Fairly away from
pit
Digging level
Digs at or
above footing
level
Digs below
footing level
Digs below
footing level
Digs at or below
footing level
Cycle time
Short
Shortly more
than power
shovel
More than power
shovel
More than the
other equipment
CONSTRUCTION EQUIPMENT
19
Trenching machine
Used
for
excavating trenches
for
laying
pipelines,
sewer,
cables etc.
Operation is quick
giving the required
depth or width.
Two
types
of
trenching machine
wheel type, ladder
type
CONSTRUCTION EQUIPMENT
20
Scrapers
Unique machine for digging and long-distance hauling of
plough able materials.
self-operating machine
It is not dependent on other equipment.
Wheels of machine cause some compaction.
The basic parts of scrapers are the bowl, apron and tail
gate or ejector.
CONSTRUCTION EQUIPMENT
21
SCRAPER
CONSTRUCTION EQUIPMENT
22
Bull dozer
The heavy blade attached to the tractor pushes the
material from one place to another.
The tractor can be of the crawler or the wheeled type.
Classification of bull dozer
1. Position of blades
a) Bull dozers in which the blade perpendicular to the
direction of movement
b) Angle dozers in which the blade is set at an angle with the
direction of movement.
CONSTRUCTION EQUIPMENT
23
2. Based on mountings
a) Wheel mounted
b) Crawler mounted
3. Based on the control
c) Cable controlled
d) Hydraulically controlled
CONSTRUCTION EQUIPMENT
24
Bull dozer
CONSTRUCTION EQUIPMENT
25
Applications
Bull dozers are mainly used for the following operations
1. For spreading the earth fill
2. For opening up pilot roads through mountainous and
rocky terrains.
3. Clearing construction sites.
4. Maintaining haul roads
5. Clearing land from the trees and stumps
6. back-filling trenches at construction sites by dragging the
earth from one place to another
CONSTRUCTION EQUIPMENT
26
Tractors
Multi-purpose machines used mainly for pulling and pushing the
other equipment.
Tractors may be classified as
a) Crawler type tractor- Used to move bull dozers, scrapers. The
crawler has a chain by which these tractors can be very effective even
in the case of loose or muddy soils. The speed of this type dose not
exceed 12 kmph normally.
b) Wheel type tractor- The engine is mounted on four wheels. The
main advantage is higher speed, sometimes exceeding 50 kmph it is
used for long-distance hauling and good roads.
CONSTRUCTION EQUIPMENT
27
TRACTOR
CONSTRUCTION EQUIPMENT
28
Comparison between crawler and
wheeled tractors
Crawler type
Wheeled type
1. Slow speed
1. Greater speed
2. More compact and powerful and can
handle heavier jobs
2. Con handle only lighter jobs
3. costly
3. cheaper
4. Cost of operation and maintenance is high
4. Operational and maintenance cost is less
5. Stick control for steering
5. Wheel steering control
6. Moves on rough roads only
6. Moves on rough as well as good roads
7. Used for short distances
7.Used for longer distances
8. Requires skillful operation, maintenance
and repairs
8. Lesser skills required for operations,
maintenance and repairs
CONSTRUCTION EQUIPMENT
29
Earth compaction equipment
Smooth-wheel rollers.
Sheep-foot rollers
a)Ordinary sheep-foot roller
b)Convertible roller
c)Turn foot roller
Pneumatic-tyred rollers
CONSTRUCTION EQUIPMENT
30
Smooth-wheel rollers
Plain steel rollers
Self-propelled type
Weighing from 5 to 15 tonnes
Used for ordinary rolling work where deep compaction is
not required
These rollers may have one front and two rear wheels
The rear wheels being usually larger in diameter and the
front one being winder.
CONSTRUCTION EQUIPMENT
31
Weight of rollers may be increased by filling water or
sand ballast in hollow cylinder.
These rollers are effective in compacting granular soils,
such as sand, gravel and crushed stone.
CONSTRUCTION EQUIPMENT
32
SMOOTH WHEEL ROLLER
CONSTRUCTION EQUIPMENT
33
Sheep-foot rollers
For compacting earth work in embankments and canals (where
compaction deep into the layer of the earth is required)
These gives best result in compaction when the soil is clay or
predominantly cohesive and impervious.
The sheep foot rollers may weigh upto 15 tonnes or more
Travel at a speed of 25 kmph
As roller moves over the surface, the feet penetrate the soil to
produce a kneading action and a pressure to mix and compact the soil
from bottom to top layer.
With repeated passages of the roller, the penetration of feet decreases.
CONSTRUCTION EQUIPMENT
34
SHEEP FOOT ROLLER
CONSTRUCTION EQUIPMENT
35
Pneumatic-tyred rollers
It consists a base or a platform mounted between two
axles.
The rear of which has one more wheel than the front.
Most suitable for compacting fine-grained soil and well
graded sands.
Ballasting is done using either water, sand or pig iron in
order to increase the self weight.
CONSTRUCTION EQUIPMENT
36
Major advantages are the ability to control the ground
contact pressure by:
a) Altering the weights of machines,
b) Increasing the number of wheels,
c) Increasing the tyre width
d) Changing the contact area of the tyre by altering the
contact pressure.
CONSTRUCTION EQUIPMENT
37
PNEUMATIC TYRED ROLLER
CONSTRUCTION EQUIPMENT
38
Hauling equipment
The equipment used for transportation of material are known as
hauling equipment or simply haulers.
Haulers may operate on the roadways or railways
It involve
transportation of building materials,
carriage and disposal of excavated earth
haulage of heavy construction equipment.
CONSTRUCTION EQUIPMENT
39
These are classified on the basis of method of dumping
the load
1. Dump trucks
a) Side or rear dump trucks
b) Bottom dump trucks
2. Dumpers
CONSTRUCTION EQUIPMENT
40
Dump trucks
These are used for earth moving purpose.
The selection of the type of dump trucks for a specific job depend on
the soil condition.
(a) Side or rear dump trucks These are heavy duty trucks with strongly built body which is
hinged on the truck chassis at the rear end and one side
respectively, and can be fitted to the rear in the case of rear dump
and to the hinged side in case of the side dump, through the
action of hydraulic jacks.
These trucks are suitable for use in hauling wet clay, sand, gravel,
quarry rocks etc.
CONSTRUCTION EQUIPMENT
41
Side dump truck
CONSTRUCTION EQUIPMENT
42
Rear dump truck
CONSTRUCTION EQUIPMENT
43
Bottom dump trucks
These are similar to semi-trailers in which their front is supported on
the rear of the hauling tractor and their rear is resting on their own
wheels.
The body of the truck remains in the same position and the discharge
of the material takes place through its bottom after opening of two
longitudinal gates.
The gates are hinged to the side of the body.
These trucks are suitable for use in hauling free flowing material,
such as, sand, gravel, dry earth, hard clay etc.
CONSTRUCTION EQUIPMENT
44
BOTTOM DUMP TRUCK
CONSTRUCTION EQUIPMENT
45
Dumpers
High speed pneumatic wheeled trucks
Short chasis
Strong bodies
Loading, hauling and dumping is done very fast as compared to other
equipment
Suitable for short hauls on rough roads
Specially where a shuttle movement is required.
CONSTRUCTION EQUIPMENT
46
Dumper
CONSTRUCTION EQUIPMENT
47
Hoisting equipment
Hoisting is the lifting a weight from one location and moving it
to another location which is at a reasonable distance.
Big projects such as, construction of dams, industrial buildings
etc. require hoisting equipment.
Hoisting equipment includes jacks, winches, chain hoists and
cranes.
Crane is the only single machine which, as a single piece, is
capable of providing three-dimensional movement of a weight.
CONSTRUCTION EQUIPMENT
48
Cranes are broadly classified as :
i.
ii.
iii.
iv.
v.
Stationary or derrick cranes
Mobile cranes
Overhead or gantry cranes
Traveller cranes
Tower cranes
CONSTRUCTION EQUIPMENT
49
Derrick cranes
Derrick cranes consist of a mast, a boom and a bull wheel on which
the boom rotates about a vertical axis and guys or supporting
members.
Electrically operated, diesel operated or diesel-electrically operated.
The boom can revolve through 360.
This crane is used for heavy loads upto 200 tons.
Mobile cranes
These cranes are mounted on mobile units which is either crawler
type or wheel type
Truck cranes have high mobility while the crawler mounted cranes
move slowly.
Crawler mounted cranes are capable of moving on rough terrain.
CONSTRUCTION EQUIPMENT
50
MOBILE CRANES
CONSTRUCTION EQUIPMENT
51
Overhead or gantry cranes
large service area,
freedom from floor obstructions
and three-way mobility,
Widely used in erection, foundry, steel plants, storage yards
and different types of industrial works.
These type of cranes consist of two main parts i.e., the bridge
and the crab.
The bridge consists of two main girders fixed at their end to
end and capable of moving on gantry rails.
The crab consists of the hoisting gear mounted on a frame.
The frame itself is mounted on another set of wheels and
capable of travelling across the main girder.
CONSTRUCTION EQUIPMENT
52
OVERHEAD CRANE
CONSTRUCTION EQUIPMENT
53
TRAVELLER CRANES
Travelling or bridge cranes have their crabs moving on girders
which are supported on legs instead of on overhead gantry
track as used in overhead cranes.
The legs are capable of moving on tracks laid on the floor.
CONSTRUCTION EQUIPMENT
54
Tower cranes
Tower cranes are actually a derrick crane mounted on a steel
tower.
Tower cranes are usually used for industrial and residential
high-rise buildings.
These are commonly used for assembly of industrial plants
with steel structures.
The main parts of tower crane are under carriage, slewing
platform, tower with operators cabin and jibs.
The tower has a truss structure welded from steel bars and
channels.
CONSTRUCTION EQUIPMENT
55
TOWER CRANE
CONSTRUCTION EQUIPMENT
56
Conveying equipment
Transporting material from one place to another over a stationary
structure.
Caries material in continuous stream with its distinct feature such as
endless chain or belt.
Can be done horizontally, vertically or inclined.
When the equipment does horizontal conveying, it is known as
conveyor and when it does vertical, it is known as elevator.
Conveying are mainly used in mining, construction and in some of
the industries.
In construction industry, conveyors are mainly used for concreting
purpose.
CONSTRUCTION EQUIPMENT
57
Utility
The Advantage of using conveyors are as follows:1. It increases the output.
2. It facilitates continuity in operation.
3. It results in time saving.
4. There are no waiting periods.
CONSTRUCTION EQUIPMENT
58
Some of the popular conveyors are
as follows:1.
2.
3.
4.
Belt conveyor
Screw conveyor
Bucket conveyor
Aerial transport
CONSTRUCTION EQUIPMENT
59
Belt conveyor
Used when large quantities of materials have to be conveyed over
long distances at fast speed.
It consists of a belt running over a pair of end drums or pulleys and
supported at regular intervals by a series of rollers called idlers.
These idlers are supported on a conveyor frame.
The middle sag provided in the belt prevent the spilling of material.
Generally, rubber is most commonly used as conveyor belt.
CONSTRUCTION EQUIPMENT
60
BELT CONVEYOR
CONSTRUCTION EQUIPMENT
61
The advantages of using belt
conveyor are as follows:1.
2.
3.
4.
5.
It can handle light as well as heavy materials, dry or wet, fine or
coarse etc.
It can and for distances to convey several thousand tons of material
per hour and for distances of distances of several kilometers.
It can carry material horizontally or inclined.
It is lighter in weight then other conveyors.
It gives controlled discharge of material and discharge can be
controlled by the speed of the belt.
CONSTRUCTION EQUIPMENT
62
SCREW CONVEYOR
Widely used for handling granular or pulverized material.
The quantity of material conveyed is less compared to the conveyor,
but at the same time the cost is also less.
A screw conveyor consists of a helix mounted on a bearing at the
ends and at intermediate points and is driven by a motor from one
end.
The material enters the through at one end is carried to the other end
by screwing action of helix.
The length of the conveyor is about 65m. with an inclination up to a
maximum of 350.
CONSTRUCTION EQUIPMENT
63
SCREW CONVEYOR
CONSTRUCTION EQUIPMENT
64
Bucket conveyor
It has buckets in the shape of V which are open at the top.
They may be feeder loaded or may drag in a vertical movement or
along an incline.
The length of these type of conveyors are generally limited to 25 m.
(due to weight of the conveyor and strength of the chains.)
This type of conveyer is mainly used in coal handling where bucket
elevators carry the material vertically.
CONSTRUCTION EQUIPMENT
65
BUCKET CONVEYOR
CONSTRUCTION EQUIPMENT
66
Aerial transport
Aerial transportation through cableways, rope-ways and tram ways
Often used with advantage for transportation of material in hilly
regions.
Reducing the distance of transportation as well as cost of
transportation
The load being passed over intermediate towers or stations for long
distances.
CONSTRUCTION EQUIPMENT
67
Aerial transport
CONSTRUCTION EQUIPMENT
68
Aggregate and concrete production
equipment
Aggregate has to be produced at the site, if the quantity needed is
very large.
Therefore, in any project where concrete requirement is very high, an
aggregate preparation and processing plant is essential to complete
the concreting operations.
Aggregate production consists of two stages is recovery and
processing.
Basic material, such as stone, is recovered from a rock quarry or from
the river bed and processing is done which consists of crushing,
grading, washing and stock piling of aggregate.
CONSTRUCTION EQUIPMENT
69
Aggregate production equipment
Crushers are used mainly to reduce the size of large stone or rock to
smaller uniform sized aggregates required for concrete mix.
Crushing consists of
Pressure,
Impact,
Attrition
A combination of these operations.
CONSTRUCTION EQUIPMENT
70
Jaw crushers
It is one of the primary crushers.
It operates by allowing stone to flow into the space between two
jaws, one of which is stationary and other is movable, which together
constitute the crushing surfaces.
The distance between the two jaws decreases as the stone travels
downward under the effect of gravity and ultimately passes through
the lower opening.
The moveable jaw is capable of exerting a pressure sufficiently high
to crush the hardest rock.
The movable jaw is suspended from a shaft mounted on bearings on
the crusher frame.
The jaw plates are made of manganese steel which can be removed,
replaced or reversed.
CONSTRUCTION EQUIPMENT
71
Jaw crushers
CONSTRUCTION EQUIPMENT
72
Gyratory crusher
This is another type of primary crusher.
This type of crusher comprises a hardened steel head has a long
conical shape, with a trough shaft suspended in a bearing at the top,
and an eccentric base connection connected to gears.
Thus, as the cone is rotated, the gap between itself and the walling
changes from a maximum to minimum for each cycle.
The rock is feed into the chamber at the top and as it moves
downward, crushing is done and finally emerges through the bottom
gap.
The size of this type of crusher is the width of the receiving opening
measured between the concaves and the crushers head.
It is available in sizes varying from 20cm to 200cm.
CONSTRUCTION EQUIPMENT
73
Gyratory crusher
CONSTRUCTION EQUIPMENT
74
Cone crusher
Cone crusher are used as a secondary or tertiary crusher.
These crusher are capable of producing large quantities of uniformly
fine crushed stone.
It has a shorter cone with smaller inlet and outlet openings as
compared to the gyratory crusher.
CONSTRUCTION EQUIPMENT
75
Cone crusher
CONSTRUCTION EQUIPMENT
76
Roll crusher
Roll crushers are also one of the secondary or tertiary crushers.
This crusher consists of a heavy cast iron frame equipped with two
counter rotating rollers mounted on a separate horizontal shaft.
The crushed rock from the primary crusher is feed through the gap
between the two rollers for crushing further.
Usually one roller has a fixed axis while the other can be adjusted to
give the required setting.
The crusher is compact, light weight and low in cost.
CONSTRUCTION EQUIPMENT
77
Roll crusher
CONSTRUCTION EQUIPMENT
78
Hammer mill
Hammer mill is one of the impact crushers mostly used as primary or
secondary crusher.
It consists of a housing frame, a horizontal shaft extending through
the frame, number of frames and hammers attached to the frame and
one more hard steel breaker plates.
As the stone is feed to the mill, the hammers, which are driven by a
motor, move at the high speed and brake the stone into pieces and
driving them against the hard plate, further reduce their size.
CONSTRUCTION EQUIPMENT
79
Hammer mill
CONSTRUCTION EQUIPMENT
80
Rod mill and ball mill
This are the tertiary crushers.
A rod mill consist of a circular steel shell.
The interior of the shell is lined on the inside with a hard material
wearing surface.
The shell contains a number of steel rods.
The length of these rod is slightly less then the length of the shell.
Crushed stone is feed through the inlet and fine aggregate of the size
of sand is discharged at the other end.
If the rods are replaced by steel balls to provide the impact required
the grind the stones, the crusher is known as the ball mill crusher.
The size of the balls generally used is 50 mm dia. Size.
CONSTRUCTION EQUIPMENT
81
Rod mill and ball mill
CONSTRUCTION EQUIPMENT
82
Concrete production plants
For mixing different ingredients in required proportion.
It consists of storage bins for storing materials like cement
and admixtures.
Aggregate is mix in it with the help of a hopper which is
fixed in plant.
CONSTRUCTION EQUIPMENT
83
Concrete production plants
CONSTRUCTION EQUIPMENT
84
Pile driving equipment
The process of pile driving involves lifting the piles into position,
holding it to refusal or to a specified depth.
Driving is accomplished through hammering the pile top with a
hammer.
Equipment are so designed for driven effectively at an economical
cost.
Major pile driving equipment are:
Pile driving rigs
Pile driving hammers
CONSTRUCTION EQUIPMENT
85
PILE DRIVING EQUIPMENT
CONSTRUCTION EQUIPMENT
86
REFERENCES
Construction engineering and management by S. Seetharaman
wikipedia.com
Goggle images
CONSTRUCTION EQUIPMENT
87
Thank you
construction equipment
88
