Scribd
Upload
55 views2 pages

VLAN Configuration Guide

The document configures VLANs 2 and 3 on a switch, assigns interfaces to each VLAN, and verifies the VLAN configuration. It enters privileged mode, creates VLANs 2 and 3, assigns names to each, configures interfaces Fa0/1 and Fa1/1 to VLAN 2 and interfaces Fa2/1 and Fa3/1 to VLAN 3, exits configuration mode, and uses the "show vlan" command to display the configured VLANs and their assignments.

Uploaded by

CristianMauriDiaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views2 pages

VLAN Configuration Guide

The document configures VLANs 2 and 3 on a switch, assigns interfaces to each VLAN, and verifies the VLAN configuration. It enters privileged mode, creates VLANs 2 and 3, assigns names to each, configures interfaces Fa0/1 and Fa1/1 to VLAN 2 and interfaces Fa2/1 and Fa3/1 to VLAN 3, exits configuration mode, and uses the "show vlan" command to display the configured VLANs and their assignments.

Uploaded by

CristianMauriDiaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Switch>enable (Modo privilegiado)

Switch#configure terminal (Para entrar en la configuracin del terminal)


Enter configuration commands, one per line. End with CNTL/Z.
Switch (config) #vlan 2
Switch (config-vlan) #name vlan2
Switch (config-vlan) #exit
Switch (config) #vlan 2
Switch (config-vlan) #exit
Switch (config) #vlan 3
Switch (config-vlan) #name vlan3
Switch (config-vlan) #exit
Switch (config) #interface FastEthernet0/1 (Interfaz que queremos
configurar)
Switch (config-if) #switchport access vlan 2
Switch (config-if) #exit
Switch (config) #interface FastEthernet1/1
Switch (config-if) #switchport access vlan 2
Switch (config-if) #exit
Switch (config) #interface FastEthernet2/1
Switch (config-if) #switchport access vlan 3
Switch (config) #interface FastEthernet3/1
Switch (config-if) #switchport access vlan 3
Switch (config-if) #exit
Switch (config) #exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#show vlan (Para comprobar la tabla de configuracin)
VLAN Name

Status

Ports

---- -------------------------------- --------- ------------------------------1

default

active

Fa4/1, Fa5/1

vlan2

active

Fa0/1, Fa1/1

vlan3

active

Fa2/1, Fa3/1

1002 fddi-default

act/unsup

1003 token-ring-default
1004 fddinet-default

act/unsup
act/unsup

1005 trnet-default

act/unsup

VLAN Type SAID


Trans2

MTU Parent RingNo BridgeNo Stp BrdgMode Trans1

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ -----1

enet 100001

1500 -

enet 100002

1500 -

enet 100003

1500 -

1002 fddi 101002


1003 tr

101003

1500 1500 -

1004 fdnet 101004

1500 -

ieee -

1005 trnet 101005

1500 -

ibm -

Remote SPAN VLANs


------------------------------------------------------------------------------

Primary Secondary Type

Ports

------- --------- ----------------- -----------------------------------------Switch#

You might also like