SikaSwell
Swellable Profiles and Sealants
Active Waterproofing Solutions
for Construction Joints
Innovation & since
Consistency 1 9 1 0
SikaSwell Active Waterproofing Systems
For Construction Joints, Pipe Penetrations
and Other Waterproofing Details
Introduction
SikaSwell swellable profiles and sealants are an internationally
tested and proven range of extremely cost effective hydrophilic joint
sealing systems. SikaSwell swelling profiles are easily bonded to
joints and penetrations in concrete with Sika adhesives, normally
with no additional work required to the reinforcement or formwork The
SikaSwell product range includes solutions for sealing construction
joints, pipe penetrations, precast sections and isolation joints i.e.
between concrete and steel components. They can be used for the primary joint sealing of concrete joints against low to medium water pressure, or to provide additional protection and security for other waterproofing systems, such as water stops, i.e. in complex detailing and
structures exposed to high water pressure. The SikaSwell systems
can also provide effective solutions for waterproofing in difficult expo-
SikaSwell Typical Applications
sure or application conditions, i.e. against seawater or water with a
high salt content, during periods of heavy rainfall on site, or when rapid
installation without extended waiting or curing times is needed.
Key Advantages:
n A ll types of swelling and sealing technologies in one product range
n V ery cost effective sealing of construction joints
n S uitable for difficult situations (i.e. environmental conditions or access)
n P roducts for almost all water qualities including sea water and
water with a high salt content
nC
an provide back-up security for other waterproofing systems
n S olutions for sealing between different materials and substrates
SikaSwell Typical Applications
Basements
Infrastructure
Water Tanks
Industrial Buildings
Refurbishment
SikaSwell systems provide
easy solutions for sealing
construction joints, pipe penetrations, isolation joints and
many other waterproofing
details.
SikaSwell products are often
used as secondary sealants for
other waterproofing systems to
increase their security.
SikaSwell systems keep
water safely inside water tanks,
sealing construction joints and
pipe penetrations in an easy and
economic way.
The high chemical resistance of
SikaSwell products allows
secure watertight jointing solutions in and around industrial
buildings and facilities.
The easy application of
SikaSwell systems
directly onto existing
structures is an important
advantage; they are
extremely versatile with
many uses in refurbishment projects.
Construction Joints
SikaSwell solutions can be used for nearly all types of construction joints and are very
advantageous in joints with difficult environmental exposure conditions or access etc.
Waterproofing Details
SikaSwell Plugs and Rings are an easy and secure way of sealing around all types of formwork spacers. Different sizes are available for most common spacer systems.
Penetrations
SikaSwell systems provide flexible waterproofing solutions for all types of penetrations, with
swellable sealants and different shaped profiles to meet all different requirements.
Isolation Joints
SikaSwell can handle the difficult joints in isolation joints between different materials very
easily and can be applied or bonded to many different substrates as well as concrete, including
natural stone, metals and many plastics etc.
SikaSwell Systems A Complete Range
Including All of the Available Technologies
The SikaSwell
Waterproofing Principle
SikaSwell Selection Guide
Construction Joints
In contact with water SikaSwell Profiles
and Sealants develop an expansive swelling
pressure. The pressure between the expanding
SikaSwell and the surrounding concrete
structure prevents the penetration of water
through the joint and provides a durable waterproofing solution. SikaSwell A Profiles
can also swell and expand to fill any voids or
gaps and so provide even more security.
SikaFuko Swell-1
Swellable Injection Hose
Steel
Work
SikaSwell A-2010
SikaSwell A-2015/2025
SikaSwell B...
SikaSwell P-2003/2005
SikaSwell P-2010/2010 H
SikaSwell P-2507 H
SikaSwell S-2
SikaSwell S-3
Ideal product for application on materials
SikaSwell S-3
There are also SikaSwell systems specifically designed to develop these swelling pressures with seawater and water with a high
salt content.
SikaSwell A
SikaSwell A M
Formwork spacers are used on
nearly every concrete structure
and site. These swellable rings
avoid the penetration of water
from the outside and the swellable
plugs seal the inside of the
spacers.
n e asy and secure in application
SikaSwell Injection Hose
systems can be combined with
other waterproofing systems
such as water stops, for high security waterproofing.
SikaFuko Swell-1 is ideal
for this and provides a zero leak
tolerance solution.
n double security
n easy and secure application
SikaSwell B
Two component, gun applied, fast
curing system which can also be
rapidly applied as a swellable
sealant and as an adhesive for
SikaSwell profiles.
n two-component fast curing
system
SikaSwell P
SikaSwell P M
SikaSwell S-2
SikaSwell S-3
SikaFuko Swell-1
Ideal product for application conditions
*
in case of using mesh
Rain-protection coating
SikaSwell
Rings and Plugs
A one component, gun applied
swellable sealant system, for fast
application and suitable for use
on rough surfaces. Also used as
an adhesive for SikaSwell
profiles.
n o ne-component for very easy
application
Pipes
Suitable for drinking water
Bentonite based one of the
worlds best known traditional
swelling / sealing technologies.
A simple solution for sealing
construction joints.
n long-term proven experience
world wide
Tunnel
Segments
Heavy salty water
The high mechanical properties
of this swellable polymer based
product allow its application
under difficult site conditions.
n h igh mechanical stability
n p rotective coated to withstand
even heavy rain
n s pecial profile shapes are
available
Precase
Elements
Adhesive
SikaSwell A-2005
Long-term experience
This active joint sealing system
swells towards any water. The
flexible properties of this material
enable it to swell into small
cracks or gaps. SikaSwell A
is based on acrylic resins.
n unique swelling properties
n proven long-term durability
n h ighly economic and cost
effective
Concrete
Structure
Penetrations
Short waiting time between
fixing and concreting
SikaSwell S-2
Medium salty water
SikaSwell B
Rough surfaces
SikaSwell P
Double safety
SikaSwell A
SikaSwell Ideal for On-site Application
Case Studies
SikaSwell systems are ideal for sealing construction joints in basements and other below ground structures with a low to medium ground water
pressure. They can be applied as the primary sealing solution, or in combination with other waterproofing systems to provide additional security.
Peugeot Centre
Moosseedorf, Switzerland
Urumyuh Lake
Iran
Project Description:
New construction of car workshops and showrooms.
Construction: 2005 2006
Project Description:
Construction of a hydraulic water retaining structure
Construction: 2004
Project Requirements:
Sealing 800 m of construction joints against ground water pressure.
The footprint of the overall structure is approximately 120 60 m.
Project Requirements:
Sealing 2900 m of isolation joints between steel pipes and the concrete
structure, with the specific requirement of being able to swell in contact
with salt water.
Sika Solution:
SikaSwell P-2507 H
SikaSwell S-2
Sika Waterbar AR-28
SikaFuko Swell-1
(former Sika Injectoflex HPM)
Sika Solution:
SikaSwell A-2010 M
(former Duroseal Type S 2010)
The application of SikaSwell Sealants is with a standard sealant
gun and they can be used as a joint sealant and also as an adhesive for
SikaSwell Profiles or the injection hose system SikaFuko
Swell-1. A typical application of SikaSwell Profiles and Sealants
is in the waterproofing of construction joints between floor slabs and
walls.
The SikaSwell S-2 Sealants and the Profiles, using the Sealants as
the adhesive, can also be applied directly onto rough surfaces for refurbishment works, and in combination with other waterproofing systems
such as SikaFukoVT-1 injection hoses, to seal connection joints
between new and existing buildings or structures for example.
Sika Full Range Solutions for Construction
Concrete Production
Basement Waterproofing
Flooring
Sika ViscoCrete
Sika Retarder
Sika SikaAer
Sikaplan, Sikalastic
Sika & Tricosal Water stops
Sika Injection Systems
Sikafloor
SikaBond
Corrosion and Fire Protection
Concrete Repair and Protection
Structural Strengthening
SikaCor
Sika Unitherm
Sika MonoTop
Sikagard
Sikadur
Sika CarboDur
SikaWrap
Sikadur
Joint Sealing
Grouting
Roofing
Sikaflex
Sikasil
Sikadur
SikaGrout
Sika AnchorFix
Sikaplan
Sarnafil
SikaRoof MTC
Watertight Concrete Basements
with Sika Concrete, Jointing,
and Injection Technology
Sika Services AG
Business Unit Contractors
Speckstrasse 22
CH-8330 Pfffikon
Switzerland
Phone +41 58 436 23 80
Fax +41 58 436 23 77
www.sika.com
Flexible Waterproofing of Basement
Structures with Sikaplan
Flexible Waterproofing of Tunnels
with Sikaplan Membranes
Sika and Tricosal Water Stops
Waterproofing of Expansion and
Construction Joints
Our most current General Sales
Conditions shall apply.
Please consult the Product Data Sheet
prior to any use and processing.
Innovation & since
Consistency 1 9 1 0
SikaFuko Injection Hose Systems
Unique Waterproofing Solutions
for Construction Joints
Sika Services AG / BU Contractors / Waterproofing / SikaSwell / 09.2009 / RB
Other available Sika Waterproofing Brochures:
Innovation & since
Consistency 1 9 1 0
