Scribd
Upload
292 views22 pages

LTE Drive Test Report CL14 - 05

An LTE drive test was conducted from 19/01/2015 to 20/01/2015 to evaluate network performance. Key performance indicators like coverage, quality, throughput and handover success rates were analyzed. Coverage was found to be 76.40% for the UE and 88.45% for the scanner, failing to meet the 95% target. Quality samples for SINR and RSRQ met or exceeded their targets. Peak downlink throughput of 108.85 Mbps was observed and over 72% of samples exceeded 25 Mbps. Handover and data setup success rates also met their targets. Various radio network parameters were plotted and analyzed.

Uploaded by

Olivero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
292 views22 pages

LTE Drive Test Report CL14 - 05

An LTE drive test was conducted from 19/01/2015 to 20/01/2015 to evaluate network performance. Key performance indicators like coverage, quality, throughput and handover success rates were analyzed. Coverage was found to be 76.40% for the UE and 88.45% for the scanner, failing to meet the 95% target. Quality samples for SINR and RSRQ met or exceeded their targets. Peak downlink throughput of 108.85 Mbps was observed and over 72% of samples exceeded 25 Mbps. Handover and data setup success rates also met their targets. Various radio network parameters were plotted and analyzed.

Uploaded by

Olivero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd

LTE Drive Test Report CL14_05

Drive test date 19/01/2015-20/01/2015


Report date 22/01/2015

Legend for DT team reference


All the plot in the report must follow the legend as below (even the legend in the example slide
differs, please follow this page only)

Technology
plot

For auto-mode plot only


(IRAT/CSFB/Idle auto). Use
the site object like this

UMTS

Introduction: SITE DETAILS

Missing Route

Drive Test Methodology


Round

Test No

Test Case

UE Mode

Equipment

PS DL

Lock LTE

UE

Coverage

Scanner

R1

Remark
Define with UE1 in
TEMS;
Repeated upon
completion of
download after a
waiting time of 10s;
Define with UE2 in
TEMS;

File Size

1GB

Drive Test KPIs


KPI Parameter

Value

Pass/Fail

Coverage Samples (RSRP)

KPI target Unit


95.0% of samples -95
dBm

KPI Source

(Test Case)

76.40%/88.45%

FAIL

UE DL and Scanner

Quality Samples (SINR, 0% Cell Load)

85.0% of samples 10
dB

89.27%/76.03%

FAIL

UE DL and Scanner

Quality Samples (RSRQ, 0% Cell


Load)

90.0% of samples -14


dB

94.98%/97.55%

PASS

UE DL and Scanner

PS Setup Success rate

99.0 %

100%

PASS

DL

PS Drop Rate

1.0 %

0%

PASS

DL

Peak 80 Mbps

108.85 Mbps

PASS

Downlink Throughput (eUTRAN@ 15


MHz)

50% of samples 25
Mbps

72.33%

PASS

DL

Handover Success rate (Intra-freq LTELTE)

98 %

100%

PASS

DL

Data Setup Time

340 ms

204 ms

PASS

DL

Downlink BLER

Monitor

90.27%

N/A

DL

Number of DL/UL

82

67

PASS

DL

Drive test plot

RSRP: Scanner

RSRQ: Scanner

SINR: Scanner

PCI Plot: SCANNER

RSRP: UE (PS download, lock L18)

SINR: UE (PS download, lock L18)

RSRQ:UE (PS download, lock L18)

PCI Plot: UE

Throughput: UE PS download, lock L18

The following part is for analysis


purpose

MODULATION:UE PS download, Lock L18

PRB:UE PS download, Lock L18

UE Tx power: UE PS download, Lock L18

BLER: UE PS download, Lock L18

RI: UE PS download, Lock L18

You might also like