Scribd
Upload
39 views1 page

API 650 Tank Specifications Overview

The document discusses specifications for Rezervoar 1, a storage tank with the following properties: - The diameter is 30m and capacity is 10,000m3. The height is specified as 15m by API 650. - The minimum recorded temperature in the area is -6°C. API 650 and EN 14015 specify minimum design temperatures of -1°C and -7°C respectively. - Roof live load is specified as 1kPa by API 650. Material thickness limits and groups for the tank are defined by API 650.

Uploaded by

lazy5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views1 page

API 650 Tank Specifications Overview

The document discusses specifications for Rezervoar 1, a storage tank with the following properties: - The diameter is 30m and capacity is 10,000m3. The height is specified as 15m by API 650. - The minimum recorded temperature in the area is -6°C. API 650 and EN 14015 specify minimum design temperatures of -1°C and -7°C respectively. - Roof live load is specified as 1kPa by API 650. Material thickness limits and groups for the tank are defined by API 650.

Uploaded by

lazy5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Rezervoar 1

Visina rezervoara
Prenik rezervoara je 30 m, a njegov kapacitet 10 000 m3.
API 650: Visina rezervoara je 15m (V=10 603 m3)
MDMT
Minimalna izmjerena temperatura na ovom podruju je -6 C.
EN 14015: MDMT= -1 C
SHELL: MDMT= -7 C
Roof live load
API 650: Iznosi 1 kPa
Materijal
API 650: Materijali iz grupe I, s tim da je max debljina 13 mm (do ove debljine nema potrebe
za ispitivanjem materijala, tj. impact testing).
Materijali iz grupe IV, s tim da je max debljina 17 mm.
Grupa I: A 283 GR C
Grupa IV: A 573 GR 65/75
Venting
Dizel:
Flash point 93 C
Boiling point 140 360 C
Plat
SHELL: faktor slaganja limova (1/n), n= 3
SHELL: Duina jednog lima = 2.5 , usvajamo 8 m
SHELL: Visina jednog lima, min 2 m
API 650: Visina jednog lima, min 1,8 m

You might also like