Scribd
Upload
179 views1 page

Mini UTM

This document describes a mini universal testing machine (UTM) with variable speed stepper drive suitable for various tests including cap snap on, cap pull, flip pull, top load, peel strength, seal strength, and elongation at break tests. The machine has dual load cells with capacities of 10kg or 20kg and 100kg, variable test speeds from 5-500mm/min, 300mm max travel length, and digital deflection display. It features multiple load cells, servo drive speed variation, microprocessor controller, and safety functions like peak hold and overload protection. Optional modules can extend the machine's functionality.

Uploaded by

Rohit Chawla
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
179 views1 page

Mini UTM

This document describes a mini universal testing machine (UTM) with variable speed stepper drive suitable for various tests including cap snap on, cap pull, flip pull, top load, peel strength, seal strength, and elongation at break tests. The machine has dual load cells with capacities of 10kg or 20kg and 100kg, variable test speeds from 5-500mm/min, 300mm max travel length, and digital deflection display. It features multiple load cells, servo drive speed variation, microprocessor controller, and safety functions like peak hold and overload protection. Optional modules can extend the machine's functionality.

Uploaded by

Rohit Chawla
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Universal Testing (UTM)

Mini-UTM (Universal Testing Machine)


Variable Speed Model with Stepper Drive.

Suitable for :
- Cap Snap ON test
- Cap Pull test
- Flip Pull test
- Top Load test (Bottle Compression)
- Peel Strength Test (Inter-Layer Bond Strength Test)
- Seal Strength Test
- Elongation at Break

Machine Capacity : Dual Range (2 Load Cells)


Load Cell 1 : 10 Kg or 20 Kg (as per your choice)
Load Cell 2 : 100 Kg

Load Cell resolution :


Load Cell 1 : 1 g or 2 g (as per capacity chosen)
Load Cell 2 : 50 g

Variable Test Speed : 5 – 500 mm/min


Max Travel Length : 300 mm (other sizes available)
Digital Display of Deflection (Resolution 0.1 mm)

Features :
Multiple Loadcells for low capacity and high capacity applications.
Servo Drive for step-less speed variation over a large range.
Microprocessor based controller with embedded Push Buttons on Panel.
Dual line, Backlit LCD display for stress free viewing.
Peak hold facility to register maximum reading during test.
Auto-stop facility on completion of test.
Auto-stop facility on machine overload (Overload Protection).
Auto-Calibration facility using dead weights (to be arranged by Buyer).

Optional Modules :
Many modules / jigs / adopters / fixtures are available to extend
the functionality of the UTM.

High-Capacity / Full-Size UTM machines also available.

You might also like