Scribd
Upload
251 views1 page

Pouch Burst and Compression Testing Equipment

This document summarizes a pouch burst tester/compression tester. It is an electro-hydraulic machine that can apply a constant rate of travel static and dynamic loads to test the seal integrity of liquid- or gas-filled pouches from 3 ml to 1,500 ml or larger. It has digital load cell-based systems, LCD displays, and programmable settings. The tester can perform destructive tests by compressing samples until failure or non-destructive tests by compressing only to a preset load limit.

Uploaded by

Rohit Chawla
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
251 views1 page

Pouch Burst and Compression Testing Equipment

This document summarizes a pouch burst tester/compression tester. It is an electro-hydraulic machine that can apply a constant rate of travel static and dynamic loads to test the seal integrity of liquid- or gas-filled pouches from 3 ml to 1,500 ml or larger. It has digital load cell-based systems, LCD displays, and programmable settings. The tester can perform destructive tests by compressing samples until failure or non-destructive tests by compressing only to a preset load limit.

Uploaded by

Rohit Chawla
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Pouch Burst / Compression

Pouch Burst Tester / Pouch Compression Tester


(Static + Dynamic Load Tester )

Electro-Hydraulic model with constant rate of travel.


Suitable for testing the Seal Integrity of Liquid / Gas Filled - Pouches / Saches / Blisterpacks.
Suitable for 3 ml – 1,500 ml or larger packs.

Models Available :
Sr No. Description Model # H300D Model # H500D
1 Capacity 300 Kgf 500 Kgf
2 Least Count / Resolution 0.1 kgf 0.5 kgf
3 Accuracy (0.2% of Full Scale) 0.6 Kgf 1 Kgf

Specifications / Features :
Digital model with load cell based system
With backlit LCD Display
With Embedded Push Buttons on control panel.
Peak hold facility for registration of maximum reading.
With auto-calibration facility.

- Standard Platform size :


L= 200mm x W= 200mm x H=50mm
- Large Platform size :
L= 350mm x W= 250mm x H=100mm
Note : Other models, capacities and sizes also available.

This equipment is suitable for :


1) Dynamic Load Test (Destructive Mode)
Test Type : Press till failure
In this method, the sample is compressed until the pouch bursts.

2) Dynamic Load Test (Non-Destructive Mode)


Test Type : Press till Load Setpoint. Then release.
In this method, the sample is compressed only upto the Load setpoint Pre-Determined by the user. If
the pouch bursts before the set-point is achieved, then this becomes a destructive test. The machine
automatically stops on sample failure or when the preset-load is achieved. Whichever is earlier.

You might also like