Scribd
Upload
847 views1 page

Material Comparison List

This document provides a comparison of material specifications for tubes or pipes. It lists material properties such as chemical composition, mechanical properties including tensile strength, yield strength and elongation, heat treatment process, and results of tests including impact tests, hardness tests, and non-destructive tests. The authorized inspector verifies whether the material meets requirements.

Uploaded by

darren84
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
847 views1 page

Material Comparison List

This document provides a comparison of material specifications for tubes or pipes. It lists material properties such as chemical composition, mechanical properties including tensile strength, yield strength and elongation, heat treatment process, and results of tests including impact tests, hardness tests, and non-destructive tests. The authorized inspector verifies whether the material meets requirements.

Uploaded by

darren84
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

MATERIAL-COMPARISON-LIST

For Tube or Pipe Tensile Strength Yield Strength Elongation Reduction [%] of A

Comparison between ASME Material and another Material Specification and actual Material to be used

Edition

Item
Desoxidation Bend Test

Melting Practice

SA-370 Test-Method

Melting Method

Manufacturers Process

Corrosion Test ( Stainless Steel only )

Supplementary Tests

Number of Tests

Specimen Orientation

Dimension Tolerances Marking of Material

Note: Recertified acc. UG-10 Grain Size

Flattening test

Flaring Test

Flange Test

Hydrostatic Test

Actual Results

MTR or CMTR No. / Designation :

Date (MTR)

CHEMICAL ANALYSES Cr Mo Ni V Al Nb Ti

N = HR = A = QT =

normalized hot rolled annealed quenched & tempered

Heat Treatment

Impact Test

Hardness Test

Brinel, Rockwell, Vickers

Specimen Type

min at min at min at

[J] [ C ] [J] [ C ] [J] [ C ]

Actual Results

LEGEND:

REMARKS:

Verification by AUTHORIZED INSPECTOR:

Requirement fulfilled

Requirement not fulfilled

Date: Sign:
(c) ONE/TV/BV

NR

Not required

NA

Not applicable

Material_Comparison_List.xls - Rev. 03/2004

( Charpy-V ; ISO-V ; other )

item

Si

Mn

Cu

Temperature [ C ]

[ Joule ] at [ C ]

ET - Eddy Current Test UT - Ultrasonic Test

Material Specification or Standard [ MPa ] [ MPa ] Lo [%]

Material Grade Type Class

Addenda

You might also like