Intelligent Power Devices (IPDs)
MIP0221SY, MIP0222SY, MIP0223SY, MIP0224SY, MIP0225SY, MIP0226SY, MIP0227SY
Silicon MOS IC
s Features
q Single chip IC with high breakdown voltage power MOS FET and CMOS control circuits q Allowing to input worldwide mains (AC 85 to 274V) q A pulse-by-pulse overcurrent protection circuit and a timer autorestart circuit are integrated.
unit: mm
10.50.5 4.50.2
2.80.2 1.50.2
9.50.2 8.00.2
6.80.1
1.40.1
q Switching power supply (to 90W) q AC adaptor q Battery charger
15.40.3 4.20.3
3.70.1
1.40.1
13.50.5 Solder Dip
2.50.2
Parameter Drain voltage Control voltage
Symbol VD VC
Ratings 700 8 MIP0221SY 0.3
Unit V V
2.540.3 5.080.5
9.3
s Absolute Maximum Ratings (Ta = 25 3C)
0.80.1
0.60.1
MIP0222SY 0.585 MIP0223SY 1.15 Output current ID MIP0224SY 1.72 MIP0225SY MIP0226SY MIP0227SY Control current Channel temperature Storage temperature IC Tch Tstg 0.1 150 55 to +150 2.4 2.9 3.5 mA C C A
1: Control 2: Source 3: Drain EIAJ: SC-46 TO-220 Type Package (a)
s Block Diagram
Auto-restart Control pin Shunt regulator + 5.7V 4.7V Shutdown/Auto-restart Power supply for internal circuit 1/2 1/2 Auto-restart current-source 1/2
Drain pin
+ -
Ron X ID Timer auto-restart circuit + Power MOS FET Q
PWM control current
Thermal shutdown circuit
S Restarting trigger circuit R
Max Duty Clock Sawtooth + S R Q Q Leading edge blanking
RE
Low pass filter
Minimum ON-time delay circuit Source pin
2.80.2
s Applications
Intelligent Power Devices (IPDs)
s Electrical Characteristics (TC = 25 2C)
Parameter Output frequency Control functions Maximum duty cycle Minimum duty cycle Control pin charging current Auto-restart threshold voltage Auto-restart Lockout threshold voltage Auto-restart hysteresis voltage Auto-restart duty cycle Auto-restart frequency MIP0221SY MIP0222SY Self-protection current limit Circuit protection MIP0223SY MIP0224SY ILIMIT MIP0225SY MIP0226SY MIP0227SY Leading edge blanking delay Current limit delay ton(BLK) td(OCL) Symbol fOSC
MIP0221SY/0222SY/0223SY/0224SY/0225SY/0226SY/0227SY
Conditions IC = 2mA
min 90 64
typ 100 67
max Unit 110 70 3 1.2 kHz % % mA V V V % Hz 9.28 0.55 1.1 1.65 2.2 2.75 3.3 s s 150 4.2 36 18 10 6.7 5 4 3 0.25 mA V s s V C V A
MAXDC IC = 2mA MINDC IC = 10mA IC VC(on) VC(off) VC TSW/TTIM fTIM VC = 0 VC = 5V
2.4 1.9 2 5 4 0.5
1.5 0.8 5.7 4.7 1 5 1.2 6.3 5.3 1.5 8
0.23 0.45 0.9 1.35 1.8 2.25 2.7 IC = 3mA IC = 3mA IC = 3mA ID = 0.025A ID = 0.1A ID = 0.2A ID = 0.3A ID = 0.3A ID = 0.3A ID = 0.3A IDSS VDSS tr tf VD(MIN) VC ICD1 ICD2 IC = 3mA Output MOS FET enabled Output MOS FET disabled 36 5.4 0.7 0.5 VDS = 650V, Output MOS FET disabled ID = 0.25mA, Output MOS FET disabled 700 130 2.3
0.25 0.5 1 1.5 2 2.5 3 0.25 0.1 140 3.3 31.2 15 8.5 5.8 4 3.3 2.6 0.01
Thermal shutdown temperature TOTP Power-up reset threshold voltage VC reset MIP0221SY MIP0222SY MIP0223SY ON-state resistance MIP0224SY RDS(on) MIP0225SY Output MIP0226SY MIP0227SY OFF-state current Breakdown voltage Rise time Fall time Drain supply voltage Power supply voltage Shunt regulator voltage Control supply/discharge current
0.1 0.1
0.2 0.2
5.7 1.4 0.8
6.1 1.8 1.1
V mA mA
