Scribd
Upload
175 views3 pages

Hologram Unit HUL7207 Specifications

This document summarizes the specifications and features of the HUL7207 Hologram Unit. It is a small package size hologram unit that uses micro-mirror integration. It has a fast response time of 50 MHz and uses SSD and 3-beam methods for focus and tracking error signal detection. It is intended for use in CD-ROM drives up to 40x speed and other optical information processing applications. Key specifications include a laser beam output of 0.18-0.25 mW, operating current of 35-45 mA, and oscillating wavelength of 795-815 nm.

Uploaded by

Vinícius Bardella
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
175 views3 pages

Hologram Unit HUL7207 Specifications

This document summarizes the specifications and features of the HUL7207 Hologram Unit. It is a small package size hologram unit that uses micro-mirror integration. It has a fast response time of 50 MHz and uses SSD and 3-beam methods for focus and tracking error signal detection. It is intended for use in CD-ROM drives up to 40x speed and other optical information processing applications. Key specifications include a laser beam output of 0.18-0.25 mW, operating current of 35-45 mA, and oscillating wavelength of 795-815 nm.

Uploaded by

Vinícius Bardella
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Hologram Unit

HUL7207
Hologram Unit
0.40.1 (0.3)

Smaller package size achieved through micro-mirror integration (4.8 8.2 4.3 mm) Fast response (fC = 50 MHz) Focus error signal detection : SSD method Tracking error signal detection : 3-beam method Low-power semiconductor laser included

O Y Reference plane

(0.2) (0.5)
3.00.2

Reference plane Apparent emitting point Apparent emitting point Reference plane

Position of reference plane

SEC. X-O-Y

2
2.550.2

0.250.05 Lead frame

SEC. X-O-Y

Applications
CD-ROM drives (supports 40 time speed CD-ROM drives)

Absolute Maximum Ratings (Ta = 25C)


Parameter Laser beam output*1 Laser reverse voltage Monitor PD reverse voltage Supply voltage Operating supply voltage range Reference voltage Operating ambient temperature Storage temperature
*1

Symbol PO VR(LD) VR(mon) VCC VCC VC Topr Tstg

Ratings 0.3 2 6 6 +3.0 to +5.5 +1.3 to VCC 1.3 10 to +60 40 to +85

Unit mW V V V V V C C

Light emitting output through objective lens

Unit Characteristic Specifications (Tc = 253C)


Parameter Laser beam output*1 Operating current Operating voltage Oscillating wavelength Focus error signal amplitude Tracking error signal amplitude Focus error signal pull-in range Frequency characteristics
*1 Light

Symbol PO IOP VOP L VFE VTE DFE fC

Conditions VRF = 570mV, VCC = 5V CW VRF = 570mV, VCC = 5V CW VRF = 570mV, VCC = 5V VRF = 570mV, VCC = 5V VRF = 570mV, VCC = 5V VRF = 570mV, VCC = 5V VRF = 570mV, VCC = 5V

,,,, ,,,, ,

8.10.2

(Note): [Link] corner R=0.20 max. [Link] of plate:Ni 1m min.+Au 0.1m min. [Link] of hologram=2.0mm, n=1.519

min 25 775 340 220 9 40

0.50 0.780.2 1.330.2

typ 0.18 35 1.9 795 480 340 12 50

max 0.25 45 2.4 815 620 460 16

4.70.1

Features

1 2 3 4 5 6

4.80.1 0.85=4.0

emitting output through objective lens

,,,, ,,
7

12 11 10 X 9 8 7

(0.35)

For optical information processing

Index mark for No.1 pin on reverse side 11.20.2 8.20.2 8.0 +0 0.05 (1.8)

Unit : mm

4.330.2 2.550.2 3

Gate the rest

,,,,

, ,,

Unit mW mA V nm mV mV m MHz

Hologram Unit

HUL7207

Block Diagram of Circuit Functions


2 1 12

3
Pmon + P2 P4 P3 P7 P9

LD

11

10

P8 P1 + BAND GAP Reg. P6

9
P5 P10 +

8 7

1: GND 2: Mon. out 3: N.C. 4: (P2+P4+P8) out 5: VC 6: (P1+P6) out

7: GND 8: (P5+P10) out 9: VCC 10: (P3+P7+P9) out 11: LD (+) 12: LD ()

This datasheet has been download from: [Link] Datasheets for electronics components.

You might also like