Scribd
Upload
455 views1 page

Welding Checklist

This document is a gas welding and burning performance control checklist used to assess safety procedures and equipment. It contains 18 yes or no questions regarding proper removal of flammable materials, availability of fire equipment, use of permits in restricted areas, condition of personal protective equipment, training of operators, and risk assessments of all welding and burning operations. Space is provided to record subtotals, scores, and any further actions needed to reduce risks.

Uploaded by

Michael Miotk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
455 views1 page

Welding Checklist

This document is a gas welding and burning performance control checklist used to assess safety procedures and equipment. It contains 18 yes or no questions regarding proper removal of flammable materials, availability of fire equipment, use of permits in restricted areas, condition of personal protective equipment, training of operators, and risk assessments of all welding and burning operations. Space is provided to record subtotals, scores, and any further actions needed to reduce risks.

Uploaded by

Michael Miotk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Gas Welding / Burning Performance Control Checklist

Assessor Department / Location Date

Gas Welding / Burning Performance Control Checklist


Michael Miotk GQHSE Manager
YES NO N/A

1. Has all unnecessary flammable material been removed 2. Is the correct type of fire fighting equipment readily available 3. Are normal welding / burning operations carried out in approved zones 4. Is a permit to work procedure used for other areas 5. Is fume extraction equipment installed and working 6. Is PPE specified, supplied and used 7. Is PPE in good condition 8. Are regulators, hoses and connections regularly checked 9. Is the torch cleaned and checked and equipment purged prior to use 10. Is an anti-flashback device fitted 11. Are non return / isolation valves and flame arrestors in good condition 12. Are gas bottles secured while in use 13. Has the manual handling of gas bottles been catered for i.e. trolley supplied 14. Is the storage of full and emplty gas bottles correct i.e separated in a secure cage 15. Are all pipelines, bottles and ancillary items clearly marked 16. Are there adequate welding screens in place 17. Are operators of gas welding / burning equipment trained and competent 18. Has a full risk assessment been undertaken on all welding / burning operations
Sub Totals

Score
Further Actions To Reduce Risk

ANSWER

Supervisor Checked

Gas Welding / Burning Performance Control Checklist

page 1

You might also like