KINNEY KMBD Bypass Valve (BP)
Mechanical Vacuum Boosters with Bypass Valve
Models:
KMBD 400 BP KMBD 720 BP KMBD 1600C BP Kinney vacuum boosters can be coupled with rotary piston, liquid ring and rotary vane pumps to provide very high pumping speeds. Since the boosters capability is significant below 1 Torr, it also expands system capability down into the lower pressure regions. For example, liquid ring systems with Kinney boosters can achieve end pressures down in the fraction of a Torr range. Kinney vacuum boosters are automatically protected by an overload bypass valve which adjusts to gas load conditions. When the pressure difference gets to 75 Torr, the bypass valve opens and prevents it from getting any higher. The pressure difference determines the load on the motor which is consequently also limited. As soon as the vacuum system is pumped down to where the pressure difference is less than 75 Torr, gravity closes the valve and the booster resumes normal operation. The booster does not slow down and recovery is instantaneous. The bypass valve eliminates the needs for temperature or pressure switches. An on-line switch is all that is required, and a wide variety of backing pumps may be used.
Features: Automatic overload protection Easy Installation Low horsepower low heat load Operates at all pressures. Typical minimum
operating pressure is 1 Torr
Compatible with all makes of vacuum pumps Rugged, proven design Pump-down times greatly reduced
Specifications: MODEL
Recommended backing pump size range Motor Inlet/Outlet Length Height Width Operating Weight
CFM HP / kW NPT in. / mm in. / mm in. / mm Lbs. / kg
KMBD 400 BP KMBD 720 BP
100 300 3 / 2.24 2 NPT 39.3 / 993 16 / 406 15.4 / 391 400 / 181 200 400 5 / 3.73 2.50 NPT 49.5 / 1257 21.4 / 544 17.5 / 445 560 / 254
KMBD 1600C BP
1600 15 / 11.19 6 ANSI 35.5 / 902 20 / 508 20.5 / 521 850 / 386
Typical Pumping Speed Curves
700 600
Pumping Speed (CFM)
1150 720BP 5 HP 1080
Pumping Speed (CFM) Pumping Speed
1750 1500 1250 1000 750 500 250 0 .1 1 10
Inlet Pressure TORR
3150 2700
Pumping Speed
500 400 300 200 100 0 .1 1
900 720 400BP 3 HP 540 360 180 10 100 1000
1600C BP 15 HP
2250 1800 1350 900 450
100
1000
Inlet Pressure TORR
ADVANCING THE STANDARDS IN VACUUM TECHNOLOGY
Your Local Tuthill Vacuum & Blower Systems Sales Professional:
TUTHILL
Vacuum & Blower Systems
4840 West Kearney Street Springfield, Missouri USA 65803-8702 Tel 417 865-8715 800 825-6937 Fax 417 865-0307 [Link] kinney@[Link]
Dimensions
Values shown are approximate and should not be used for construction. Certified drawings are available through your local Tuthill Vacuum & Blower Systems Sales Professional.
Models KMBD 400 BP, KMBD 720 BP
L W A D J NPT Inlet
H E F B M C J NPT Discharge N K
Model KMBD 1600C BP
L J D W
F J N K
B G
M C
Model KMBD 400 BP KMBD 720 BP KMBD 1600C BP
A 9 228.6 10.38 263.7
B 2 50.8 1.50 38.1
E 9.88 251
F 1.13 28.7
J 2 NPT
K 23.38 594
L 39.25 997
M 9 229
N 1.25 31.8 1.63 41.4 1 25.4
W 11.38 289 17.50 444.5 25 635
11.38 11.88 289.1 301.8
.44 16 11.17 406.4 .63 16 .63 16
13.88 15.50 12.25 4.24 352.5 393.7 311.2 107.7 20 508 18 24.63 457.2 625.6 4.25 108
21.38 2.5 NPT 28.13 49.50 11 543 715 1257.3 279.4 32 812.8 4 NPT 25 635 49.88 1267 16 406.4
12 6 304.8 152.4
ADVANCING THE STANDARDS IN VACUUM TECHNOLOGY
Your Local Tuthill Vacuum & Blower Systems Sales Professional:
TUTHILL
Vacuum & Blower Systems
4840 West Kearney Street Springfield, Missouri USA 65803-8702 Tel 417 865-8715 800 825-6937 Fax 417 865-0307 [Link] kinney@[Link]
0203
