Jeppesen JeppView for Windows User Guide

Jeppesen
55 Inverness Drive East
Englewood, Colorado 80112-5498

Jeppesen, 2015, All Rights Reserved

Copyright 2015 Jeppesen, All rights reserved.

Except as otherwise provided and authorized in a written agreement between both Jeppesen and your company, Jeppesen's
copyrighted information and materials may not be processed, reformatted, reproduced, stored in a retrieval system, or
transmitted in whole or in part, in any form or by any means, whether electrical, mechanical, photocopying, recording or
otherwise, without prior written permission of Jeppesen.
Microsoft, Windows XP, Windows Vista and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Product or brand names may be trademarks or registered trademarks of their respective owners.

Installation and Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Contacting Jeppesen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restarting the CDA Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restarting the CDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the CDA Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving JeppView Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deactivating the Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10
11
11
11
11
12
12
13

Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting Measurement Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Application Interface Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detaching a Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Screen Proportions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying or Hiding Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tool Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Lat/Lon Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Edit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enroute Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weather Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notebook Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right-Click Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Toolbars and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Arranging Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Undocking a Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Docking a Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Moving a Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying (or Hiding) a Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enroute Chart Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weather Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tools Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preferences Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal Charts Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chart Compare Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enroute Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating the Enroute Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zooming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drawing a Zoom Box (Drag Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

15
15
15
15
15
16
16
17
17
18
19
20
20
22
22
23
24
24
24
24
25
25
25
25
26
27
28
29
30
32
33
34
34
34
34
35

Copyright Jeppesen 2015. All Rights Reserved.

3

Drag Pan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ruler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Previous and Next View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Default View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Enroute Chart Default View. . . . . . . . . . . . . . . . . . . . . . .
Displaying the Enroute Chart Default View . . . . . . . . . . . . . . . . . . . . . .
Enroute Chart Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting an Enroute Chart Object . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Searching for a Navaid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thumbnail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thumbnail Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thumbnail View Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing the Enroute Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change Notices Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Change Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Text Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Airway Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Bottlang Airfield Manual . . . . . . . . . . . . . . . . . . . . . . . . . . .
Searching the Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Search Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Text Viewer Toolbar Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working with the Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working with Different Languages. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Organizing Your Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Moving Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Renaming Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing a Topic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notebook Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
New Custom Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening a Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving a Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing a Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal Charts Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing a Terminal Chart Revision Letter . . . . . . . . . . . . . . . . . . . . . . .
Chart Compare Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Customizing the Screen Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enroute Chart Themes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Enroute Chart Theme . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting Chart Theme Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35
35
35
36
36
36
36
36
37
37
37
38
39
39
40
41
41
41
42
42
44
45
46
46
47
47
47
47
47
48
48
48
48
48
49
49
49
49
50
51
51
51

Terminal Chart Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Understanding Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Terminal Chart Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Terminal Chart Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Copyright Jeppesen 2015. All Rights Reserved.

4

Updating Terminal Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Navigating in the Terminal Charts View . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scrolling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zooming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filtering Terminal Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal Chart Filter Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal Chart Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Chart Compare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airport List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chart Compare Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Show Both Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drag Pan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Highlight New Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55
56
56
56
56
57
57
58
58
58
59
59
59

Airport List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Airport List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airport List Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working With the Airport List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Centering on an Airport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sorting Airports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airport Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Distinguishing Between IFR and VFR . . . . . . . . . . . . . . . . . . . . . . . . . .
Airport List Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resizing a Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Moving a Column. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airport List Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Custom Airport List Filter . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attributes Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Geography Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coverages Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Load an Airport List Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filtering Airports Using the Enroute Chart . . . . . . . . . . . . . . . . . . . . . . . . . .
Applying a Rectangle Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applying a Circular or Corridor Filter . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filtering Airports by Distance From . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applying Airport Filter to the Enroute Chart . . . . . . . . . . . . . . . . . . . . . .
Airport Favorites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Airport Favorites List Filter . . . . . . . . . . . . . . . . . . . . . . . . . .
Airport Favorites Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Airport Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Airport Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing Airports Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61
61
61
62
62
62
63
63
63
63
63
63
63
65
66
67
67
67
67
67
68
68
68
68
69
69
69

Route Planning and RoutePacks. . . . . . . . . . . . . . . . . . . . . . . . 70

RoutePack Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Registering RoutePack Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Renaming a RoutePack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Copyright Jeppesen 2015. All Rights Reserved.

5

Opening a RoutePack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Closing a RoutePack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cutting, Copying, and Pasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing RoutePacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a RoutePack File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering RoutePack Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Route Using Point and Click . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Route Using Plain Language Routing . . . . . . . . . . . . . . . . .
Creating a Route Using Dot Notation Text Routing . . . . . . . . . . . . . . . .
Modifying a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reordering Waypoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting Waypoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Route Drag and Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Importing a RoutePack File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Showing the Route on the Enroute Chart . . . . . . . . . . . . . . . . . . . . . . . . . .
Alternate Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Add Alternate Route Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding Other Airports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Other Airports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Charts in the Other Airports Folder. . . . . . . . . . . . . . . . . . . . . .
Adding to RoutePack Column in the Airport List . . . . . . . . . . . . . . . . . .
Showing the Distance From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Showing Alternate Airports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Showing Approaches Within . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filtering Charts in the RoutePack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applying Filters to Existing RoutePacks and Airports . . . . . . . . . . . . . .
Resetting Default Chart Type Selections. . . . . . . . . . . . . . . . . . . . . . . .
Setting the Chart Types for Other Airports . . . . . . . . . . . . . . . . . . . . . .
Selecting Charts in RoutePacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying Hidden Charts in the Route . . . . . . . . . . . . . . . . . . . . . . . . .
Flight Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appending Waypoints to a Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding to a RoutePack Using Plain Language Routing . . . . . . . . . . . .
Deleting or Duplicating Routes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

71
71
72
72
72
72
72
72
73
74
75
75
75
76
76
76
76
76
77
77
77
77
77
78
78
78
78
79
79
79
79
80
80
81
82
85
86

Weather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Live Weather Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Regions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weather Map Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weather Data Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Altitude Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Time Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

88
89
89
90
91
91
92
92

Copyright Jeppesen 2015. All Rights Reserved.

6

Looping Weather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weather Legend Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weather Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turbulence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lightning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Winds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Icing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radar Echo Tops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEXRAD Winter Mosaic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AIRMETs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIGMETs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
METARs & TAFs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

93
93
95
95
95
95
96
96
96
97
97
97

Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Printer Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printer Page Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Jeppesen Paper for Printing Charts . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Terminal Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
From Terminal Charts Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
From the RoutePack List or Airport List. . . . . . . . . . . . . . . . . . . . . . . .
Printing a Trip Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Terminal Chart Change Notices . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing Vector Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

100
101
101
102
102
102
102
102
103

Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Range Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Anchor Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Point to Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Measurement Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Moving an Anchor Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Centering on an Anchor Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making Changes to Range Bearing. . . . . . . . . . . . . . . . . . . . . . . . . . .
Range Bearing Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User-Defined Waypoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding a User-Defined Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modifying a User-Defined Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . .
Pasting a User-Defined Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a User-Defined Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing a User-Defined Waypoint Location . . . . . . . . . . . . . . . . . . .
Changing the Default Waypoint Icon . . . . . . . . . . . . . . . . . . . . . . . . . .
Centering on a Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Showing Airports Near a Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . .
Showing Distance from a Waypoint. . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing a Waypoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sunrise Sunset Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unit Converter Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

105
105
105
105
106
106
106
106
107
107
107
107
108
108
108
108
108
108
108
109
109
109

Copyright Jeppesen 2015. All Rights Reserved.

7

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Copyright Jeppesen 2015. All Rights Reserved.

8

C HAPTER 1

Installation and Activation

For installation and activation information, see the Quick Start Guide that was part of the
product package you received.
This chapter contains the following topics:
Contacting Jeppesen
Restarting the CDA Service
Starting the CDA Service
Starting the Application
Deactivating the Application
Removing Software

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

9

Installation and Activation

Contacting Jeppesen
Jeppesen provides technical support 24 hours a day, 7 days a week.
North America Toll-Free: 800-537-7225
United States Direct: 303-328-4170
United Kingdom: 44-1293-842407
Australia: 61-73105-9450
All Other International: 49-6102-507004
Email: [email protected]

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

10

Installation and Activation

Restarting the CDA Service

For installations that use the CDA service.
The Content Delivery Agent (CDA) service runs locally on your computer, or on your server if
in a client/server network environment. The CDA connects remotely to the Data Distribution
and Management (DDM) web service. This service is used as a method of updating your data
to keep it current. The CDA application starts when you start your computer, and runs
continuously as a background process.

Restarting the CDA

For problems where a client computer does not act like it has received updates, on the server
open the CDA Service, click Stop, and then click Start. This re-triggers the message that is
sent to all client computers. You must exit the application and then restart it. See Starting the
Application.

Starting the CDA Service

NOTE If the CDA Service is installed on a server, contact your help desk or
service desk and explain the situation.

To start your CDA service:

1. Right-click the CDA Service Monitor icon located in your computers tray
and click
Open, or on your Windows desktop right-click My Computer > Explore, and browse to
C:\Program Files\Jeppesen\CDA\CDAMonitor.exe\ and double-click the file
CDAMonitor.exe to open the CDA Service Monitor.
2. Click the Status tab and click Start.
3. If an error is returned, contact your Jeppesen Account Manager.

Starting the Application

To start the application do one of the following:
Click Start > Programs > Jeppesen > Jeppesen JeppView for Windows
Double-click the icon on the desktop.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

11

Installation and Activation

The first time you start the software you will be prompted to activate the program. The
software must be activated within 30 days.
IMPORTANT

You are responsible for the accuracy of your flight plans and
navigation information, as well as the currency of your data.
You must satisfy yourself that this information is acceptable
before using it for your operations. If you find this information
is acceptable click I understand and accept this warning to
start.

NOTE Your computer clock and computer calender determine the status of
your data. Verify that your computer reflects the accurate date, time,
and if applicable, time zone.

Receiving JeppView Updates

To check for updates, click File > Check for Updates.

Deactivating the Application

Jeppesen uses a unique activation and security system that provides the flexibility to replace
or change the computer on which your software is installed. Refer to your license agreement
regarding how many computers you can install the same software licence serial number. Once
you have activated the program on the maximum number of computers, you can deactivate
one of them and move it to a new computer by following one of the methods below:
Uninstalling the program, and clicking Yes when the Deactivation Wizard asks if you
would like to deactivate.
Locating and running the deactivate.exe program in the folder containing your program
files.
If the Deactivation Wizard presents a list of programs to deactivate, select Jeppesen
JeppView for Windows and follow the on-screen instructions:
1. Read the warning to verify you really want to deactivate. Select the check box and click
Next.
2. Select how you want to deactivate. It is strongly recommend selecting the Automated
method if you have an Internet connection, and click Next. If you select Automated, the
program deactivates and a dialog box containing the deactivation information appears.
3. After your deactivation information has been displayed, you can install the software on
the new computer hardware.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

12

Installation and Activation

Although it no longer runs, JeppView is not uninstalled from the computer, just deactivated.
Install the software on another computer and follow the Activation Wizard. To reactivate the
programs from a computer that previously ran them, open the program and the Activation
Wizard runs again.
Be sure to keep a copy of your serial number and site key for each computer in case your hard
drive or your computer fails and you have to replace it.
NOTE If you try to reactivate the program on this computer after activating it
on another computer, or activate the products on a fifth computer
without deactivating one site key, you will receive a message from the
server that your site key limit has been exceeded. To purchase and
activate additional installations contact Jeppesen Customer Service.

Removing Software
To remove software from the computer:
1. Open the Windows Control Panel.
The exact procedure depends on whether you have the Classic Start menu set in Windows
XP. Try the following:
Open My Computer and navigate to the Control Panel.
Click Start > Settings > Control Panel.
2. Double-click Add or Remove Programs.
3. Click Jeppesen Program and Data Installation.
4. Follow the on-screen instructions.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

13

C HAPTER 2

Basics
This section contains basic setup information. Use this section for the initial configuration of
options.
This chapter contains the following topics:
Setting Measurement Units
Application Interface Window
Menus
Toolbars and Buttons
Enroute Chart
Change Notices Tab
Text Tab
Notebook Tab
Terminal Charts Tab
Chart Compare Tab
Customizing the Screen Configuration
Enroute Chart Themes

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

14

Basics

Setting Measurement Units

To change the default measurement settings click Tools > Options > Measurement. To
change the default, select from the drop-down menu to select the measurement units to be
used.

Application Interface Window

When the application is first opened the default window is displayed. This default view can be
customized to better fit your work style. Toolbars can be displayed or hidden, moved around
the window, docked and undocked. Most tabs can be displayed or hidden, and customized.
The default factory settings will show the enroute chart on the right hand side, with the airport
list and the RoutePack list on the left hand side. The standard menus are located on the top of
the user interface, and the toolbars are located below the standard menus. At the bottom of
the interface the status bar is located.

Detaching a Window
To detach a window and move it, do one of the following:
Click View > Detach Window and when the dialog opens, select the window.
Click the detach window button

and drag the window to a new location.

To attach a window do one of the following:

Click View > Attach All Windows.
On a detached window click the attach window button.

Adjusting Screen Proportions

The proportions of the screen used for the enroute chart, RoutePack list, and airport list can be
adjusted by selecting the border between them. Near the boarder the pointer icon changes to
a bar with arrows pointing both directions. While holding down the mouse button, drag the
arrow bar to the desired location and release the mouse button.

Displaying or Hiding Tabs

Select or clear to show or hide tabs:
Click View > Tabs > Enroute Chart, Notebook, or any custom screen configuration
tabs you have set up. See Customizing the Screen Configuration.
Right-click a tab and click Hide Tab or Restore to Default Arrangement.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

15

Basics

Tool Tips
Tool Tips appear on the bottom left side of the status bar when you hover the mouse cursor
over a toolbar button.

Changing the Lat/Lon Display

Right-click on the Lat/Lon display to open a sub-menu where you can change between
Minutes Only, Show Seconds, and Decimal Degrees. The lat/lon displays the cursor position.

Clock
Click on the clock to toggle it between standard time, 24-hour time, and UTC time. The clock
reflects the time and date of the computer system clock that this application is installed on.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

16

Basics

Menus
This section explores the application menus.

File Menu
The File menu has the following selections.
New
RoutePack
Ctrl+Q

Opens a dialog box to create a

new RoutePack. See Creating a
Route.

Open
RoutePack
Ctrl+O

Opens the Load RoutePack(s) to

load a saved RoutePack. See
Opening a RoutePack.

Close

Closes an open RoutePack.

Close All
RoutePacks

Closes all open RoutePacks. See

Closing a RoutePack.

Recent File

Opens your most recent

RoutePack file.

Check for Updates

Print
Export
Exit

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Select to check for current data

updates, and to install them.
Opens the Print sub-menu.
Use to export and reformat a
RoutePack file that is formatted in
CRF to a file formatted in RPK.
Closes the application.

2015 Jeppesen, All Rights Reserved.

17

Basics

Route Menu
The Route menu has the following selections.
Add Route
Activate And
Show Route

Adds a route to a RoutePack.

Activate the route and show it on
the enroute chart.
Opens a sub-menu with the
following selections.
Append or Stop Appending
WaypointsClick to add
waypoints to the selected
route. Click again to stop
adding waypoints.

Edit

Plain Language Routing

Opens the Plain Language
Flight Plan dialog box. Use this
dialog box to modify the
selected route. See Creating a
Route Using Plain Language
Routing.
DeleteDeletes the currently
open RoutePack. Does not
save a copy.
Duplicate RouteMakes a
copy of the selected route.

Plan Alternate

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Opens the Plan Alternate dialog

box. See Alternate Route.

2015 Jeppesen, All Rights Reserved.

18

Basics

Edit Menu
The Edit menu has the following selections.
Undo
Ctrl+Z

Select this if you loaded a

RoutePack and want to unload it.

Redo
Ctrl+Y

The opposite of Undo. Restores

the RoutePack unloaded using
Undo.

Cut
Ctrl+X

Use to cut a route or airport and

paste into another route or
RoutePack. See Creating a
Route.

Copy
Ctrl+C

Use to copy a route or airport and

paste into another route or
RoutePack.

Paste
Ctrl+V

Pastes the contents of the

clipboard.

Delete

Deletes a RoutePack from your

current session. The keyboard
shortcut is pressing the Delete
key.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

19

Basics

View Menu
The view menu has the following selections.
Status Bar

Tabs

Detach Window

Displays or hides the status bar.

Displays the Hide Tab/Display Tab
submenu and displays or hides
tabs. If you create custom tabs
they appear in this submenu with
the custom name you gave them.
See Customizing the Screen
Configuration.
Click to open a dialog box that
lists available windows that can
be detached and moved. See
Detaching a Window.

Attach All
Windows

Click to attach all previously

detached windows. See
Detaching a Window.

Toolbars

Displays the Toolbars submenu.

Shows or hides the different
toolbars. See Toolbars and
Buttons.

Enroute Menu
The Chart menu has the following selections.
Zoom In
Zoom Out

Zooms in one level, or 30%.

Zooms out one level, or 30%.

Max Zoom Out

Zooms out to the maximum zoom

out level.

Previous View

Previous View is similar to the

Back button in a browser, this
button navigates in reverse
through previous displays and
zoom levels.

Next View

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Next View is similar to the

Forward button in a browser, this
button navigates forward to view
previous displays.

2015 Jeppesen, All Rights Reserved.

20

Basics

Opens a sub-menu with the

following selections.
Set Default ViewSets current
view to the default view.

Favorite Views

Show Default ViewIf you set

a default view, shows that view.
The keyboard shortcut is
Ctrl+D.
Save ViewOpens the Add
Favorites dialog box. Save the
view with a name.
Remove ViewOpens a
sub-menu with previously
saved views. Click a view to
remove it.

Reset Theme

Define User
Waypoints

Restores the theme to the default

after any changes were made to
that theme.
Opens the User Waypoint
Properties dialog box. See
User-Defined Waypoints.

Range / Bearing

Displays the Range Bearing

submenu. See Range Bearing.

Search

Displays a Enroute Data Search

dialog box for searching
capabilities.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

21

Basics

Tools Menu
The Tools menu has the following selections.

Get Optional Data

Update

Opens the Data Update dialog

where you can select to start the
optional high-resolution cultural
and terrain data downloads. While
this data is downloading, you can
continue to work with the
application, and the data will
download in the background.Your
newly downloaded cultural and/or
terrain data updates will be
applied at startup, so you will
need to close and then reopen
the application to view.

Airport Favorites

Opens a sub-menu with the

airport selections.

Sunrise/Sunset

Opens the Sunrise/Sunset tool.

Enter a waypoint for the waypoint
time, or enter a character string to
begin a search. See Sunrise
Sunset Tool.

Unit Converter

Opens the Unit Converter tool.

See Unit Converter Tool.

Options

Displays the Options dialog where

many of the options are set.

Weather Menu
The Weather menu has the following selections.

Display Weather

Select to display weather on the

map and to display the weather
types; clear to hide the display of
weather and the weather types.

Display Weather
Types

Opens a sub-menu with the

weather selections. Select or
clear each type of weather
product. The weather types are
dimmed if Display Weather is not
selected.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

22

Basics

Weather Legend

Select or clear to show or hide the

weather legend for selected
weather products.

Weather Map
Controls

Select or clear to show or hide the

weather manager.

Weather Options

Click to open the Live Weather

Options dialog box.

Notebook Menu
The Notebook menu has the following selections.

Add

Opens an Add Note dialog where

you can add text that will appear
in any notebook annotated with
the date and time of the notebook
entry.

New

Opens a dialog and prompts for a

name for your new notebook.

Open

Opens a dialog that prompts you

for the name of the notebook you
want to open.

Save

Opens a dialog that prompts you

for a name to use to save your
notebook.

Print

Opens the Print dialog.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

23

Basics

Help Menu
The Help menu has the following selections.
Help

Opens the indexed and

searchable help.

Registration

Opens a dialog box that lists the

Serial number, Site Code, and
Key Code. This information is
important if you ever need
register your copy or contact
technical support.

Show Data
Effectivity

Opens a dialog box where you

can verify that your data is
current.

About

Opens a dialog box that displays

the version and build number, as
well as the version and build of
the plug-ins you currently have
installed. This information is
important if you ever need to
contact technical support.

Right-Click Menus
Access to many features are available through right-click menus throughout this application.
Most of these right-click features can also be accessed using menu options. When right-click
menus are available, they are discussed in the specific topic the right-click menu is related to.
Right-click menus appear when you right-click on objects such as airports in the airport list,
RoutePacks in the RoutePack list, items on the enroute chart (routes, boundaries, navaids). In
addition, right-clicking in the blank or open area of the RoutePack list and the enroute chart
provides additional menu options.

Toolbars and Buttons

A toolbar is a collection of controls. To identify a button, hover the mouse pointer over the
button until a ToolTip displays its name in either a popup or on the bottom left of the status bar.
Buttons that are (currently) inactive are dimmed.

Arranging Toolbars
By default, toolbars are docked, or fixed, at the top of the screen; however, toolbars can be
undocked and moved to a different position on the screen.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

24

Basics

Undocking a Toolbar
1. Double-click the left or right edge of the docked toolbar. The toolbar undocks and
becomes floating as shown in the following screen capture. [Figure 2-1]
2. Move the floating toolbar to a new location. You can leave it floating or dock it.

Figure 2-1 Example Floating Toolbar

Docking a Toolbar
Double-click the toolbar or drag the toolbar to a point on the edge of the screen. The toolbar
docks as shown in the following screen capture. [Figure 2-2]

Figure 2-2 Example Docked Toolbar

Moving a Toolbar
1. Point to the left edge of the toolbar (or the title bar if the toolbar is undocked).
2. Drag the toolbar to the desired location.
3. Hold the Ctrl key to keep the toolbar from redocking if its near an edge.

Displaying (or Hiding) a Toolbar

1. Click View > Toolbars.
2. Select (or clear) the toolbar you want to display (or hide).

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

25

Basics

Standard Toolbar
The Standard toolbar has the following selections:

New RoutePack File

Creates a RoutePack that can be

stored for a future use, or
deployed at time of creation.

Load RoutePack File

Loads a RoutePack that was

previously created and stored, or
a RoutePack created in another
Jeppesen application.

Cut

Cuts item and places it in the

clipboard.

Copy

Copies item and places it in the

clipboard.

Paste

Pastes contents from the

clipboard.

Undo

Undo the last action.

Redo

Redo the previously undone

(undo) action.

Help

Click the help button to access

the applications help.

Whats This Help

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Click the whats this help button to

change the cursor to the Whats
This curser. Click on an area of
the screen or on a button to get
help on that specific item, if more
information is available.

2015 Jeppesen, All Rights Reserved.

26

Basics

Enroute Chart Toolbar

The enroute chart toolbar accesses functions for the enroute chart and terminal charts views,
although some icons are active for only one of the two views. The enroute chart toolbar has
the following selections:
Enroute + Terminal Data
Search

Opens the Enroute Data Search

dialog box.

Previous View

Similar to the Back button in a

browser, this button navigates in
reverse through previous displays
and zoom levels.

Next View

Similar to the Forward button in a

browser, this button navigates
forward to view previous displays.

Zoom In
Zoom Out

Drop-Down
Menu

Zooms in one level, or 30%.

Zooms out one level, or 30%.

Reset Zoom

Zooms out to the maximum zoom

out level.

Off Route Blend Increase

Increases the contrast to make

the enroute chart objects more
visible (more opaque and darker).

Off Route Blend Decrease

Decreases the contrast of chart

objects with each click until at
maximum blend down, enroute
chart objects blend into the
enroute chart and are no longer
visible (the chart objects become
transparent). Use blend decrease
to de-clutter the enroute chart.

Chart Themes

Provides a drop-down menu to

select different enroute chart view
themes.

Atlas Theme

Toggles between showing and

hiding the Atlas theme on the
enroute chart view.

Thumbnail

Toggles between showing and

hiding the thumbnail on the
enroute chart view.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

27

Basics

Default View

Returns the enroute chart view to

the user-defined or application
default view.

Weather Toolbar
The weather toolbar is used to toggle on and off the display of weather and weather products.
The Weather toolbar has the following selections:
Toggle on and off the display of
weather products.
Toggle on and off the display of
turbulence.
Toggle on and off the display of
lightning.
Toggle on and off the display of
winds.
Toggle on and off the display of
icing.
Toggle on and off the display of
radar echo tops.
Toggle on and off the display of
NEXRAD.
Toggle on and off the display of
SIGMETs.
Toggle on and off the display of
AIRMETs.
Toggle on and off the display of
METARs and TAFs.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

28

Basics

Tools Toolbar
The Tools toolbar has the following selections:

Normal Mode

Route Mode

Drag Pan Mode

Displays the normal arrow selection

cursor.

Displays the point and click cursor for

setting up routes. Automatically
selected when in the Add Route Point and Click mode. Shown in the
selected mode.
Displays the hand cursor for
navigating using the mouse button
drag method.
Displays a measuring device with the
following pull-down menu options:

Anchor Mode

Point to PointDisplays a
measurement on the enroute
chart from the point you place
your cursor and click and drag
to the final point. The
measurement is sticky, that is it
remains on the enroute chart
until you click Anchor Mode >
Remove All.
Measurement OnlyDisplays
a measurement on the enroute
chart from the point you place
your cursor and click and drag
to the final point. The
measurement is not sticky and
is only visible as long as you
hold down the mouse button.
Remove AllRemoves all
measurements placed on the
enroute chart in anchor mode.

Add User Waypoint

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Adds a user waypoint to the enroute

chart.

2015 Jeppesen, All Rights Reserved.

29

Basics

Preferences Toolbar
Preferences are only available when the enroute chart is active (selected). Some preferences
are only visible at certain enroute chart zoom levels or with certain themes. The Preferences
toolbar has the following selections:
Factory Defaults
IFR Airports
VFR Airports
Low-Use Airports
VORs
NDBs

Returns the preferences toolbar

to the factory presets.
Displays or hides IFR airports.
Displays or hides VFR airports.
Displays or hides low use
airports.
Displays or hides VORs.
Displays or hides enroute NDBs.

Enroute Airspace
Fixes

In the Low Altitude Enroute

theme, there are some localizers
also connected to formations and
display when Enroute Airspace
Fixes are selected. See
Formations.

Terminal Airspace
Fixes

Displays or hides terminal

airspace fixes.

Formations

Displays or hides formations. The

term "formations" is short for
"waypoint formations" which is the
defining information that "forms"
that waypoint; the intersection of
radials from two different navaids.

Low Airways

Displays or hides low altitude

airways.

High Airways

Displays or hides high altitude

airways.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

30

Basics

Terminal Airspace

Special Use
Airspace

Displays or hides terminal

airspace, and the uncontrolled
airspace is displayed when the
IFR Airports and the CONOPS
VFR enroute chart theme is
selected. See Enroute Chart
Toolbar. Uncontrolled airspaces
show up on the enroute chart as
gray areas.
Displays or hides special use
airspace.

Localizers

Displays or hides localizers on the

enroute chart. In the Low Altitude
Enroute theme, there are some
localizers also connected to
formations and display when
Enroute Airspace Fixes are
selected. See Formations.

ARTCC / FIR / UIR

Boundaries

Displays or hides ARTCC / FIR /

UIR Boundaries on the enroute
chart (Air Route Traffic Control
Center, Flight Information Region,
Upper Flight Information Region).

Lat Lon Grid

Displays or hides the latitude

longitude grid.

Grid MORAs

Displays or hides grid MORAs

(Minimum Off Route Altitudes).

Obstacles

Displays or hides known

obstacles such as mountains.

Holding Patterns
Roads
Railroads

Displays or hides known holding

patterns.
Displays or hides roads.
Displays or hides railroads.

Urban Areas

Displays or hides high population

areas.

Hydrography

Displays or hides inland water

(rivers, lakes, etc.) but not
oceans.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

31

Basics

Political Boundaries

Displays or hides boundaries

such as states, provinces, and
countries.

Terrain Contours

Displays or hides the contour

lines of the terrain.

Terrain

Displays or hides graduated

surface terrain. When terrain is
not enabled, the Spot Elevations
are also not enabled/visible.

Isogonic Lines

Displays or hides the isogonic

lines on the enroute chart.

Transit Routes

Displays or hides the transit

routes on the enroute chart.

Terminal Charts Toolbar

The terminal charts toolbar has the following selections:

Toggle Chart Display

on Enroute Chart

When a chart is selected, this

button will toggle between the
terminal chart and the enroute
chart display when viewing the
enroute chart (enroute chart tab is
selected).

Show Full Chart

Zooms out to display the selected

chart in its entirety.

Show Header

Zooms in on the header portion of

the selected chart. (Not available
for all charts.)

Show Plan

Zooms in and centers on the map

portion of the selected chart. (Not
available for all charts.)

Show Profile and

Minimums

Zooms in and centers on the

profile and minimums portion of
the selected chart. (Not available
for all charts.)

Rotate
Counter-Clockwise
90 Degrees
Rotate Clockwise 90
Degrees

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Rotates the selected chart

90 degrees counter-clockwise.
Rotates the selected chart
90 degrees clockwise.

2015 Jeppesen, All Rights Reserved.

32

Basics

Previous Terminal
Chart

Similar to the back button in a

browser, this button navigates in
reverse through previous charts in
a series.

Next Terminal Chart

Similar to the forward button in a

browser, this button navigates
forward to view the next chart in a
series.

Chart Compare Toolbar

The chart compare toolbar has the following selections:
Zooms in one level, or 30%.
Zoom In
Zooms out one level, or 30%.
Zoom Out

Full Zoom Out

Zooms out to the maximum zoom

out level.

Rotate Left

Rotates the selected chart 90

degrees counter-clockwise.

Rotate Right

Rotates the selected chart 90

degrees clockwise.
Moves the chart up.

Scroll Up
Moves the chart down.
Scroll Down
Moves the chart to the left.
Scroll Left
Moves the chart to the right.
Scroll Right

Zoom Rectangle
Mode

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Displays the arrow cursor for

using the mouse to click-and-drag
a zoom in rectangle.

2015 Jeppesen, All Rights Reserved.

33

Basics

Drag Pan Mode

Displays the hand cursor for

navigating using the mouse
button drag method.

Enroute Chart
Use the enroute chart to perform tasks that use the enroute chart.

Navigating the Enroute Chart

The following section explains the different ways to navigate the enroute chart.

Panning
When you move the cursor to an edge of the enroute chart, the arrow changes shape to a big
green arrowhead to indicate that it is a pan control. Clicking the mouse when the arrow
appears pans the screen in that direction. To autopan hold down the mouse button when the
arrow appears (continuous panning until you release the mouse button). The arrow keys on
the keyboard also pans the enroute chart.

Zooming
Zooming in and out on the enroute chart can be accomplished in numerous ways. The most
common method is using a zoom box (also called drag zoom).
Other methods of zooming in and out include:
Clicking the zoom in, zoom out, or full zoom out buttons on the toolbar. [Figure 2-3]

Figure 2-3 Zoom In, Zoom Out, and Full Zoom Buttons

Right-click on an open area of the enroute chart to access the menu and then selecting
the Zoom In, Zoom Out, or Full Zoom Out options.
Pressing the keyboard minus () or plus (+) buttons.
Scrolling the mouse wheel.
TIP

To quickly change locations on the enroute chart, use the Full Zoom
Out option on the toolbar, then use a zoom box to zoom into the
desired location.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

34

Basics

Drawing a Zoom Box (Drag Zoom)

Figure 2-4 Example Zoom Box

To use a zoom box, or drag zoom as it is sometimes called, place the curser on the chart, hold
the mouse button, and drag the curser to draw a box on the screen. [Figure 2-4] When the
mouse button is released, the area on the enroute chart inside the box expands to fill the
screen. The smaller the box drawn, the further the chart zooms in.
NOTE A zoom box cannot be drawn if the chart is already at maximum
zoom-in.

Drag Pan Mode

Click Drag Pan Mode
and use the hand curser
on the enroute chart to drag pan to
a new location. In drag pan mode the right-click zoom in and zoom out also work.

Ruler
Use shift-click and drag to create a ruler on the enroute chart.

Previous and Next View

Previous View and Next View both can be accessed from the right-click menu or by clicking
Previous View or Next View on the toolbar. [Figure 2-5] These options are similar to the next
and back buttons in a web browser, except they control the location and zoom level on the
chart.

Figure 2-5 Previous and Next Buttons

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

35

Basics

Default View
The default view refers to the enroute chart location and zoom level displayed in the main
window every time you start the application. You can reset this view to display a different
location upon startup, and you can return to this default view at any time.
NOTE A theme is not included in the default view. On startup the theme
shown is the theme that was last selected.

Changing the Enroute Chart Default View

To change the enroute chart default view:
1. Navigate to the desired location and zoom level in the enroute chart.
2. Click Enroute > Favorite Views > Set Default View.
This changes the default view to the current display.

Displaying the Enroute Chart Default View

To display the current default view, do one of the following:
Click Enroute > Favorite Views > Show Default View
In the toolbar, click Default View
Press Ctrl+D
The default view does not change the theme, or change the RoutePack list or airport list filters.
It only displays the enroute chart over a particular area at a specified zoom level.

Enroute Chart Objects

Chart objects are features that display on the enroute chart. They include airports, airspace,
airways, enroute markers, ARTCC/FIR/UIR boundaries, holding patterns, enroute airspace
and terminal fixes, localizers, marker beacons, NDBs, obstacles, user-defined waypoints,
intersections, VORs, and routes. Features that do not display on current IFR paper enroute
charts do not display in the electronic versions either.

Selecting an Enroute Chart Object

To select a chart object, right-click the selected object. If you click the chart where two or more
items are co-located, the Select Nav Object dialog box displays.
Select the desired item and then click Close.
To display the items Properties dialog box, click Details.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

36

Basics

Some chart objects have no additional data to display, specifically: enroute markers, marker
beacons, surface features (such as roads and lakes), MORAs, holding patterns, localizer
feathers, and VFR reporting points. Clicking these features does not display a properties
dialog box and they cannot be added to routes. An exception is VFR reporting points, which
can be added to a route using the drag and drop technique.

Searching for a Navaid

The Nav Data Search function allows you to search for enroute chart objects.

Searching and Locating a Waypoint

Open the Enroute Data Search dialog box [] by doing one of the following:
Click Enroute Data Search.
Click Enroute > Search.
1. Enter all or part of the waypoint name and click Search.
2. Select the type of waypoint to search for by clicking Nav Data Type.
3. Select or clear Options from Match Identity, Match Name, Match City, Partial Match,
User Waypoint, and Within 500 nautical miles.
4. Click Locate on Chart to move the chart to the waypoint location. An arrow points to
the waypoint.
5. Click Details for properties of the object.
6. To add an object to a route click Add to Route.
7. Click Close when finished.

Thumbnail
The thumbnail is a secondary view of the enroute chart that enables you to navigate to a
specific location in the main chart view. The blue box in the thumbnail graphic represents the
area displayed in the enroute chart. [Figure 2-6] To show or hide the thumbnail click
or
use keyboard shortcut Ctrl+E.

Thumbnail Location
To change where the thumbnail is displayed on the enroute chart point to edge of the box. The
mouse pointer changes to a four-way arrow. Drag the thumbnail to a different location. The
default location of the thumbnail is set using Tools > Options > Display. The thumbnail will
disappear if the entire route is visible on the enroute chart.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

37

Basics

Figure 2-6 Thumbnail View Box

Thumbnail View Box

If the entire route is not visible on the enroute chart, depending on the zoom level, a thumbnail
view box appears within the thumbnail view. Double-click on the route in the thumbnail box to
center the route on the chart. The view box can be dragged around within the thumbnail view.
As the thumbnail view box is moved the view of the enroute chart changes accordingly as
shown below in the before and after examples.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

38

Basics

Printing the Enroute Chart

To print the enroute chart, do any of the following:
Print a Trip Kit from a RoutePack. Click File > Print > Print Trip Kit. This opens the
Print dialog. On the Print dialog click Trip Kit Items. Clear everything except enroute
chart.
Click File > Print while the enroute chart is displayed in the enroute chart view.
Click File > Print Preview to display a print preview window from which the enroute
chart can be printed.

Enroute Chart Printing Options

When printing the enroute chart there are options to show or hide the compass rose and
lat/lon grid lines. If neither Show Compass Rose nor Show Lat/Lon Grid are selected, they will
display on the enroute chart, but will not print. This applies to the enroute chart only, and not to
the airport charts or any other chart.
To set the enroute chart printing options:
1. Click Tools > Options > Printing tab.
2. Select or clear Show Compass Rose.
3. Select or clear Show Lat/Lon Grid.

Change Notices Tab

To view chart change notices, click the Change Notices tab and select an airport in either the
airport list or the RoutePack list. [Figure 2-7]

Figure 2-7 Example Terminal Chart Change Notice

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

39

Basics

If there are no chart change notices available it will be stated when you select that airport.
[Figure 2-8]

Figure 2-8 Example When No Notice Available

Printing Change Notices

Change notices can only be printed from a Trip Kit that belongs to a specified RoutePack.
To print change notices for a specific RoutePack:
1. Open the RoutePack that you want to print the change notices for. To print do one of
the following:
Right-click the top element of the RoutePack and click Print.
Click the top element of the RoutePack and click File > Print > Print Trip Kit or File
> Print > Print Change Notices. This opens the Print dialog.
2. On the Print dialog click Trip Kit Items. This opens the Trip Kit Items dialog.
3. Clear all of the items except Change Notices.
4. Click OK to print.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

40

Basics

Text Tab
Click the Text tab to access to the Airway Manual and the Bottlang Airfield Manual (VFR Text).
[Figure 2-9]

Figure 2-9 Example Text

Viewing the Airway Manual

To find information for a specified region in the Airway Manual:
1. Access the contents of the Airway Manual by performing one of the following actions:
Click the plus sign (+) next to Airway Manual to expand the selection.
Double-click Airway Manual.
To expand all the topics, right-click Airway Manual or any topic in the manual and
select Expand all. To collapse the manual, right-click Airway Manual or any topic
and select Collapse all.
2. Select the desired category from the menu, and then select the desired region (if
applicable).
3. Select the desired topic to appear in the right panel.
Use the scroll bars or the arrow keys to move up and down in the topic window.
Use the Text Viewer toolbar to zoom in, print the topic and move through the
documents. [Figure 2-10]

Figure 2-10 Text Viewer Toolbar

Viewing the Bottlang Airfield Manual

If you have a European VFR subscription, you will receive access to the Bottlang Airfield
Manual (VFR Text). The Bottlang Airfield Manual is organized by general information and then
by country.
To view information in the Bottlang Airfield Manual:
1. Click the Text tab.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

41

Basics

2. Access the contents of the Bottlang Airfield Manual by performing one of the following
actions:
Click the plus sign (+) next to VFR Text to expand the selection.
Double-click VFR Text.
To expand all the topics, right-click VFR Text or any topic in the manual and select
Expand all. To collapse the manual, right-click VFR Text or any topic and select
Collapse all.
3. Select the desired country from the menu, and then select the desired topic. The
selected topic appears on the right panel.
Use the scroll bars or the arrow keys to move up and down in the topic window.
Use the Text Viewer toolbar to view various parts of the manual in French, German
and English, print the topic and move through the documents.

Searching the Manuals

Use the Search tab to locate key words in the Airway Manual or the Bottlang Airfield Manual
(VFR Text). To search for a topic or a keyword:
1. Click the Search tab.
2. Enter keywords into the Search field. If you are looking for a French or German word in
the Bottlang Airfield Manual, verify you have the appropriate language selected in the
Text Viewer toolbar, or click All languages.
3. If you entered more than one word and would like to find topics including both words,
select All words (AND). If you would prefer to find topics that contain one word or the
other, but not necessarily in the same topic, keep Any word (OR) selected.
4. Select Match whole word only if you want to search for the whole word and not partial
words. When searching for "end" with whole words only the search engine will not
search for other words such as "descend", "intended", "attend", "endless", and
"endorsed".
5. Click Airway Manual or VFR Text. You can only search one manual at one time.
6. Click Search.

Search Results
The search results appear in the Search Results tab. To view the topic pertaining to the
user-defined search, click the Search Results tab and you can perform the following:
1. Use the up and down arrows keys to scan the pages.
2. Single-click on a topic in the Search Results tab to display that page in the window
without switching to the Table of Contents tab.
3. Double-click or press Enter on a topic to view the page and switch to the Table of
Contents tab. This allows you to view where the topic resides in the document.
4. The searched words are highlighted.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

42

Basics

Search results no longer display when the following occurs:

A new search is conducted.
A new language is selected from the toolbar.
The application closes.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

43

Basics

Text Viewer Toolbar Buttons

Previous View

Navigates through previously

displayed pages at the last known
zoom level.

Next View

Activates once the Previous View

action is used. It navigates
forward to view previously
displayed pages at the last known
zoom level.

Up one topic

Displays the previous topic in the

book.

Down one topic

Increase font size
Decrease font size

Toggle left pane

Displays the next topic in the

book.
Increases the topic font size.
Decreases the topic font size.
Removes or adds the split bar
between the table of contents and
the displayed topic. Removing the
spit bar allows more viewing area
of the topic while displaying the
split bar allows the table of
contents to display with the topic.
The splitter bar location is saved
between sessions.

Add bookmark

Creates a list of favorite topics.

The favorite topics appear in the
Bookmarks tab.

Remove bookmark

Activates when the Bookmark tab

is open and your favorite topics
are displayed. To remove a
pre-defined bookmark, select the
topic heading and click the
Remove bookmark icon.

Print the active

document

Opens the Print dialog box to print

the displayed topic.

Switch language
mode to English

Displays only English topics in the

Bottlang Airfield Manual.

Switch language
mode to German

Displays only German topics in

the Bottlang Airfield Manual.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

44

Basics

Switch language
mode to French

Displays only French topics in the

Bottlang Airfield Manual.

Show all languages

Displays all topics in all available

languages.

Show/Hide
modifications

Displays or hides the revision

bars from the selected date.

Working with the Images

Many images in the online Airway Manual and the Bottlang Airfield Manual (VFR Text) can be
rotated, reduced and expanded for better viewing by using the small toolbar above the image.
[Figure 2-11] The toolbar associated with the image only works for the image, and not for any
text that might surround the image. If you make any display changes to an image, they
automatically reset when you view another topic, or close the application.

Figure 2-11 Example Airway Manual Graphic

Rotates the image 90 degrees counter-clockwise.

Resets the rotation aspect to the default display. It does not reset the
size of the image.
Rotates the image 90 degrees clockwise.
Zooms out or reduces the size of the image.
Resets the image size to the default display. It does not reset the
rotation aspect.
Zooms in or magnifies the size of the image.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

45

Basics

Working with Different Languages

The Airway Manual only displays information in English. Regardless of the language selected
in the Text Viewer Toolbar the Airway Manual will only display in English.
The Bottlang Airfield Manual (VFR Text) works slightly different than the Airway Manual
because it supports multiple languages. There are categories under the VFR Text that support
different countries (France, Germany, Austria, etc.). Each country listed has information in
specified languages; all of them have English.
Austria has the same information in English and German.
Belgium has the same information in English and French.
France has the same information in English and French.
Germany has the same information in English and German.
Switzerland has the same information in English, German and French.
All other countries are in English only.
Depending on what language you select in the toolbar, there may be countries that do not
have any topics in that language. For example when All is selected, you will see all topics
available for that country, in the languages supported. When viewing the France book and
changing the language mode to French, you will only see the topics in French. When viewing
the France book and changing the language mode to German, you will only see the topics in
German.

Organizing Your Bookmarks

The Bookmarks tab is used to bookmark topics that are frequently viewed. You can have quick
access to your favorite topics by selecting them from this tab. There are two methods of
adding a topic to the Bookmarks tab:

Method 1
Select any book or topic in the Table of Contents. Click the Add Bookmark icon.

Method 2
1. Right-click any book or topic in the Table of Contents.
2. Select Add Bookmark from the shortcut menu.
You can create as many bookmarks as you like. Once you have added your bookmarks, you
can organize them in a way that best suits your needs by creating folders, moving the
bookmarks to different areas of the list, renaming bookmarks, and removing bookmarks that
are no longer used.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

46

Basics

Adding a Folder
To add a folder where you can move your bookmarks into:
1. Click the Bookmarks tab.
2. Right-click any existing bookmark and select New Folder.
A new folder is created below the selected bookmark. At this time, you can rename and move
your folder.

Moving Bookmarks
You can move any of your bookmarks to different areas within the Bookmarks tab. To move a
bookmark:
1. Click an existing bookmark to select it.
2. While holding the mouse button, move the bookmark to the desired location. Releasing
the bookmark on another existing bookmark places it underneath it in a separate level.
You can create many levels of bookmarks.

Renaming Bookmarks
If you would like to rename a bookmark to recognize the topic with your own words:
1. Right-click an existing bookmark and select Rename Item.
2. Enter a new title.

Removing Bookmarks
To remove a bookmark that is no longer needed, click on an existing bookmark and perform
one of the following actions:
Right-click the bookmark and select Remove Item.
Press the Delete key on the keyboard.
Click the Remove bookmark icon.

Printing a Topic
To print a topic:
1. Select the topic you wish to print from the table of contents in the Text view.
2. Click the Print

icon in the Text Viewer toolbar or press Ctrl+P.

3. The Print dialog box appears. Select your preferences and click Print.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

47

Basics

You can only print one topic at one time. On the header of each printed topic, a revision date
appears indicating the last time the content of that particular page was updated using the date
format of YYYYMMDD where YYYY is the year, MM is the month of the year between 01 and
12, and DD is the day of the month between 01 and 31. [Figure 2-12]

Figure 2-12 Example Date

NOTE If a topic is not displayed in the Text view, the print icon is not
available.

Notebook Tab
The name and path of the currently open notebook is shown on the bottom status bar.

Adding Text
After selecting the Notebook tab, click Notebook > Add to open the Add Note dialog where
you can add text that will appear in the currently open notebook with the date and time of the
entry.

New Custom Notebook

After selecting the Notebook tab, click Notebook > New. When prompted, name the
notebook. With a Custom Notebook, notes from each mission or flight can be kept separate.
When entries are made the date and time from the computers clock is used.

Opening a Notebook
After selecting the Notebook tab, click Notebook > Open. Select the notebook to view, or
browse to a location where a notebook was saved. To open a new notebook use Notebook >
New. This creates a new notebook.

Saving a Notebook
To save the currently open notebook, click Notebook > Save. Save the notebook to the
default location or browse to a folder. The notebook can also be renamed by saving it to a
different file name.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

48

Basics

A copy can also be saved using Notebook > Save and appending to the notebook name with
a word such as COPY.

Printing a Notebook
To print an open notebook, click Notebook > Print. This opens the Print dialog.

Terminal Charts Tab

To view charts, click this tab and select an airport in either the airport list or the RoutePack list.
In a RoutePack, click on a chart and press Enter. The selected chart is shown in the Terminal
Charts tab. Charts can be manipulated using the Terminal Charts toolbar. See Terminal
Charts Toolbar.

Printing a Terminal Chart Revision Letter

Terminal Chart Revision Letters can only be printed from a Trip Kit that belongs to a specified
RoutePack.
To print a chart revision letter for a specific RoutePack:
1. Open the RoutePack that you want to print the revision letter chart for.
To print do one of the following:
Right-click a chart and click Print.
Right-click the top element of the RoutePack and click Print.
Click the top element of the RoutePack and click File > Print > Print Trip Kit. This
opens the Print dialog.
2. On the Print dialog click Trip Kit Items. This opens the Trip Kit Items dialog.
3. Clear all of the items except Terminal Chart Revision Letter.
4. Click OK to print.

Chart Compare Tab

The chart compare feature allows you to compare charts that have changed in your latest data
update with the old version of each chart that has changed. Chart compare helps you see
exactly which details have changed. The airport list in chart compare is filtered to show only
the charts that have changed. Your existing filter settings and airport favorites selection are
also applied so you do not have to sift through hundreds of charts, unless you want to. See
Using Chart Compare.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

49

Basics

Customizing the Screen Configuration

The application screen can be customized for personal efficiency or for different personal work
styles. Custom configurations can be created, edited, or removed. With custom configurations,
when two or more people share the same computer, each person could have their own work
environment with a mouse click.
You can set up a custom tab with a terminal chart view so you can view more than one chart at
a time. Be aware that when you have two terminal chart windows open, the custom terminal
chart window will not update, but the terminal chart window as part of the main application will.
NOTE You cannot edit standard configurations (Chart or Notebook for
example) only Custom Configurations.

To create a new custom configuration that adds a Custom Configuration tab:

1. Click Tools > Options > Configurations tab.
2. In the Custom Configurations group click New.
3. Give the new custom configuration a Name.
4. From the Available Panes box, drag and drop the available panes to where you want
them. As you place the available panes, the pane name is moved from the Available
Panes box to the Used Panes box.
Panes can be tiled vertically, horizontally, or in a mixed configuration.
5. Click OK to save the new custom configuration, or to start over again click Reset.
6. The new custom configuration shows up in the Selected Configurations box.
7. Click OK.
8. A new tab is added with the custom configuration with the name you gave it in step 3.
9. To show or hide tabs click Display > Show Tabs or Display > Hide Tabs.
10. Click the new tab to use that custom configuration.
NOTE If you set up a custom configuration with a single window, the airport
list window for example, that window can no longer be detached. See
Detaching a Window.
All three windows of the Chart Compare feature: Chart Compare,
Airport Filters, and Chart Compare Options must all be added to a
custom configuration in order for Chart Compare to function properly
in that configuration. See Using Chart Compare.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

50

Basics

Enroute Chart Themes

A theme is a feature that displays a particular set of chart objects and symbology associated
with that theme.

Changing the Enroute Chart Theme

To change the enroute chart theme, do one of the following:
Right-click an open area of the enroute chart, click Themes, and select a theme.
[Figure 2-13
Select the theme from the drop-down menu on the toolbar and click to select.]

Figure 2-13 Theme Select Drop-Down Menu

Resetting Chart Theme Defaults

Click Enroute > Reset Theme Defaults to set the default theme.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

51

C HAPTER 3

Terminal Chart Window

The terminal chart window enables you to view charts selected from the airport list, or the
RoutePack list.
This chapter contains the following topics:
Understanding Charts
Terminal Chart Icons
Terminal Chart Changes
Updating Terminal Charts
Navigating in the Terminal Charts View
Filtering Terminal Charts
Using Chart Compare

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

52

Terminal Chart Window

Understanding Charts
Most of the airports represented in the airport list or RoutePack list have charts associated
with them (some VFR airports do not have charts). These charts may include airport, airspace,
arrival, departure, qual, noise, approach, and text (special or custom notes). Future, obsolete,
and temporary charts may also be included in the list.
NOTE "Also Serves" are "10" charts that deal with SIDs and STARs. Also
Serves are only displayed for the "10" primary airports. For example,
the "Also Serves" charts for airport KAPA, are only found with the
primary airport KDEN.

To view the list of charts for an airport, do any of the following in the airport list:
Enter the airport ICAO or IATA identification in the airport list search text box.
Click the plus sign (+) to the left of the airport ID to expand the list.
Double-click an airport.
To display a chart, do any of the following:
Click the Terminal Charts tab, and click any chart in the airport list or RoutePack list.
While not in the Terminal Charts tab, double-click the chart in the airport list or
RoutePack list.
To view another chart, do any of the following:
Click any chart in the airport list or RoutePack list.
Press the arrow keys on the keyboard to select the desired chart.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

53

Terminal Chart Window

Terminal Chart Icons

Each chart displayed in the airport list or RoutePack list has an icon associated with it
depicting the type of chart. The different chart types are listed in the following table. If an IFR
airport has VFR charts, you can distinguish between the different charts by the color; blue
icons are IFR, green icons are VFR, and purplish icons are custom PDF charts.

Airport

Airspace

Arrival
Departure
Noise
Approach
Text
Airport

IFR airport diagrams, airport

Information, take-off minimums,
JAA minimums, parking stands
and information, and parking
coordinates.
IFR Class B Airspace, Radar
Minimum Altitudes, IFR Minimum
Vector Altitude Clearance, Radar
Vectoring Area, Control Area
(CTA), Terminal Control Area
(TMA), Climb/Descend Areas,
Approach Control Area.
IFR arrival charts.
IFR departure charts.
IFR Noise Abatements, Preferred
Runways and Flight Paths.
IFR ILS, RNAV, VOR, etc.
IFR Special Notes.
VFR Airport Landing Chart.

Airspace

VFR Area Chart and Information,

VFR Visual Reference Points.

Text

VFR General Airport Information,

VFR Text Day, VFR Text Night,
VFR Departure.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

54

Terminal Chart Window

Terminal Chart Changes

Terminal chart changes fall into one of two categories:
Changes effective immediately upon receiptMost chart changes fall into this category.
When an airport is expanded in the airport list to reveal its charts, the dates seen in the
City column are revision dates, not to be confused with an effective date.
Changes that become effective mid-cycle on a specified dateJeppesen charts use an
effective date if a chart is issued before it can be used. In this situation, you should
continue to use the previous chart until the effective date. When an airport is expanded
in the airport list to reveal its charts, you will see the current chart and the future
effective chart. The future chart has a green symbol on the icon to represent future
effectivity and displays information about when it will become effective.
On the chart heading you will also see the revision date and the effective date. [Figure 3-1] If
there is no effective date, you may use the chart upon receipt.

Figure 3-1 Example Revision Versus Effective Dates

When a Trip Kit is printed before a chart is effective, it prints both the current and the future
effective chart. For example, on the effective date at 0901 GMT, the old chart is expired
marking it obsolete with a red dot. The software displays the new chart as the current one. The
red dot disappears the next time you update your charts.

Updating Terminal Charts

Electronically updating charts follow the same rules as updating charts with a paper
subscription. When updated, the charts with that update are effective immediately upon
receipt. There are a few exceptions where Jeppesen issues a chart before the effective date.
In this case, you should continue to use the previous chart until the effective date.
When an airport is expanded in the airport list to reveal its charts, you will see the current chart
and the future effective chart. The future chart has a green symbol on the icon to represent
future effectivity and displays information about when it will become effective. On the chart
heading, you will also see the revision date and the effective date. If there is no effective date,
use the chart upon receipt.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

55

Terminal Chart Window

Navigating in the Terminal Charts View

Navigating in the terminal charts view is similar to navigating in the enroute chart. Scrolling
and zooming as well as the Next and Previous functions are the same as they are for the
enroute chart. For charts the software provides additional buttons on the Chart toolbar and
additional menu commands. You can also change the orientation of charts, rotating them 90
degrees clockwise or counterclockwise.

Scrolling
To scroll the window in the charts view, point to the edge or corner of the charts view window.
The mouse pointer turns into an arrowhead. Hold down the mouse button to auto pan. The
chart view continues scrolling until the mouse button is released.

Zooming
To zoom on a chart, do any of the following:
Click Zoom In

Zoom Out

or Full Zoom Out

on the toolbar.

Click Enroute > Zoom In or Enroute > Zoom Out or Enroute > Max Zoom Out.
Press the plus (+) and minus () keys to zoom in and zoom out.
Use the mouse drag zoom box.
Click Show Full Chart

Zooming to a Preset Terminal Chart Section

In the terminal charts view, the buttons on the Chart toolbar allow you to be more specific
about the section of a chart on which you would like to zoom in. See Terminal Charts Toolbar
on page 2-32.
NOTE These commands only work with geo-referenced charts, and are not
available for airspace, arrival, departure, noise charts, etc.

Filtering Terminal Charts

Terminal chart filters can reduce the number of charts displayed in the airport list according to
selected filter criteria. Use the filter selections by clicking Filters in the airport list and making
selections from the submenu to filter the available charts.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

56

Terminal Chart Window

Terminal Chart Filter Status

Favorites shows when a favorite airports filter is in place, and the number of airports, for
example (100 Airports) would indicate that more than 13,000 airports are being filtered out and
hidden from current view. Click Filters > Clear Filters to remove the filter. This menu selection
is dimmed if there are no filters in place.

Terminal Chart Filters

In the airport list click Filters > Show/Hide Chart Types and select the type of chart you
would like displayed or hidden in the airport list. The airport still shows in the airport list even if
all of its charts are hidden.

Airport

Displays or hides Airport Diagrams, Airport

Info, Take-Off Minimums, JAA Minimums,
Parking Stands and Information, Parking
Coordinates and VFR Airport Landing Charts.

Airspace

Displays or hides Class B Airspace, Radar

Minimum Altitudes, IFR Minimum Vector
Altitude Clearance, Radar Vectoring Area,
Control Area (CTA), Terminal Control Area
(TMA), Climb/Descend Areas, Approach
Control Area, VFR Area Chart and Information
and VFR Visual Reference Points.

Approach

Displays or hides ILS, RNAV, VOR and VFR

Approach charts, etc.

Arrival
Departure
Noise
Text

Displays or hides arrival charts.

Displays or hides departure charts.
Displays or hides Noise Abatements,
Preferred Runways and Flight Paths.
Displays or hides special notes.

Advanced Settings
Click Advanced Settings to open the Advanced Chart Type Settings dialog box where you
can make more advanced chart filter selection. Select from the tabs to make the selections.
Reset this page

Resets the page for the tab you have

selected.

Reset all pages

Resets all of the pages under all of the tabs.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

57

Terminal Chart Window

Using Chart Compare

Comparing charts is as easy as clicking on the Chart Compare tab, and selecting a chart from
the airport list. Both charts are shown in the Chart Compare pane. By changing the Chart
Compare options, you can highlight changes that are important to you.
It is important to note that:
Some chart changes are more significant than others.
The chart compare feature allows you to compare charts that have changed in your
latest data update with the old version of each chart. It helps you see exactly which
details have changed.
The airport list in chart compare is filtered to show only those charts that have changed.
Your existing filter settings and airport favorite selections are also applied. See also
Filtering Terminal Charts.

Airport List
The airport list applies any airport favorites and filters you have already in effect. See Airport
Favorites and Airport List Filters.

Chart Compare Options

The chart compare options allow you to highlight and focus on what changes are important to
you.

No Enhancement
The charts are shown as is, without any highlighting.

New Details Prominent

The default view. New details and changes are highlighted in strong blue, and old details and
changes are highlighted in faded red.

Old Details Prominent

Old details and changes are highlighted in strong red, and new details and changes are
highlighted in faded blue.

Old and New Combined

New details and changes are highlighted in strong blue, and old details and changes are
highlighted in strong red.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

58

Terminal Chart Window

Old and New Prominent

New details and changes are highlighted in strong blue, old details and changes are
highlighted in strong red, and everything else is dimmed.

Show Both Charts

The default view. Both charts are shown.Clear to view only the revised chart.

Drag Pan Mode

Select to set the curser into drag pan mode to move the chart around when you are zoomed
in.

Highlight New Details

Select to highlight the new details and changes.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

59

C HAPTER 4

Airport List
The Airport List contains a listing of airports, an airport search field, favorite airports filters
pull-down list, and Filters. (See also Filtering Terminal Charts.)
This chapter contains the following topics:
Airport List
Sorting Airports
Airport List Keyboard Shortcuts
Creating a Custom Airport List Filter
Applying a Circular or Corridor Filter
Filtering Airports by Distance From
Working With the Airport List
Airport List Filters
Filtering Airports Using the Enroute Chart
Airport Favorites

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

60

Airport List

Airport List
The following column information is on the same row as the airport name:

Airport Favorites
Star

Add to RoutePack

ICAO (IATA)

Name

This column appears after you

have set up airport favorites. See
Airport Favorites. This icon is only
visible when you are working with
an airport favorites filter.
See Adding to RoutePack
Column in the Airport List.
ICAO and/or IATA identifier. Click
the down arrow to switch between
ICAO and IATA, and with each
having its list order reversed.
The name of the airport.

City

The city the airport is located in.

State

The state, province, or territory

the airport is located in.

Country

The country the airport is located

in.

Distance From

This column is only visible if you

right-click on an airport and select
Show Distance From. See Sorting
Airports by Distance From Here.

Airport List Keyboard Shortcuts

To scroll through the airport list, on your keyboard press:
Page Up, Page Down, Up Arrow, Down Arrow, Home, or End.
To go to the beginning of the airport list click a row and press Ctrl+Home.
To go to the end of the airport list click a row and press Ctrl+End.

Working With the Airport List

When any portion of an airports name, identifier, city, or state is entered in the airport list
search field, the first airport in the list that matches the criteria displays at the top of the airport
list. To search for an airport type the desired search criteria in the Search Airport text box. The
first airport that matches the criteria moves to the top line displayed in the airport list.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

61

Airport List

Centering on an Airport
Use the airport list to center on an airport in the enroute chart. [Figure 4-1.] When you find the
airport in the airport list to center on, select the airport and continue with one of the following
techniques:
Double-click the airport in the airport list.
Right-click the airport in the airport list and click Center On.

Figure 4-1. Example Locate Arrow

Sorting Airports
By default, the airport list is sorted alpha-numeric by airport ID, in ascending order, first from 0
to 9, and then from A to Z.

Sorting Airports by Distance From Here

The Distance from column, located by default to the far right in the airport list, enables you to
sort airports according to their distance from a selected point.To set the airport or navaid used
for the Distance from calculation:
1. Right-click a navaid or airport on the enroute chart, RoutePack list, or airport list.
2. Select Show Distance From Here.
The airport list displays the airports in order from the selected point at the top of the list
followed by airports listed from closest to farthest.

Airport Properties
To view the properties of an airport:
1. Right-click the airport of interest either on the enroute chart, or in the airport list and
select Properties.
2. This opens the Airport Properties dialog box.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

62

Airport List

Distinguishing Between IFR and VFR

VFR airports and chart icons are displayed in green, and IFR in blue.

Airport List Keyboard Shortcuts

To scroll through the list press Page Up, Page Down, Up Arrow, Down Arrow, Home,
and End.
To go to the beginning of the airport list click a row and press Ctrl+Home.
To go to the end of the airport list click a row and press Ctrl+End.

Resizing a Column
The width of each column can be adjusted. To change the width of a column:
1. Point to the right edge of the column heading.
2. When the pointer changes to a double arrow, drag the column to the desired width.

Moving a Column
The order of the airport list columns can be rearranged. To move a column:
1. Click and hold the column heading.
2. While holding the mouse button, drag the heading to a new position.

Airport List Filters

Use filters to limit the airports shown in the airport list to those with specific characteristics, and
then apply them.

Creating a Custom Airport List Filter

1. In the airport list, click Filters > Attributes, Filters > Geography or Filters >
Coverages.
2. Select from the various options.
3. Click Apply.
4. Click Done to apply you changes and close the airport list Filters dialog box.

Attributes Tab
The Attributes tab has the following selections:
Clear Tab
Settings

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Click to clear all selections made

under this tab.

2015 Jeppesen, All Rights Reserved.

63

Airport List

Load

Click to load the filter you just set

up.

Clear All Filters

Click to clear all filters and restore

all airports and charts.

Minimum Runway
Length

Displays airports with the

minimum runway length selected
from this list. You can select a
length from the list.

Administration Group
The Administration Group has the following selections:

Public, Private,
Military,
or Joint Use

Displays one or a combination of

those airport types. When two or
more criteria are selected, the
filters work as an AND operation
where those filtered meet all
selected criteria.

Terminal Charts Group

The Terminal Charts Group has the following selections:
Terminal Charts Available
Precision Approaches

With Chart Changes

Displays only airports that have charts

available for them.
Displays only airports that have
precision approaches.
Displays only airports that have chart
additions, deletions, or modifications
since the last revision cycle.

Customs Group
By default no check boxes are selected, and airports are displayed in the airport list regardless
of the customs services available. Select one or more oxygen types to display only the airports
with the selected services in the airport list.

Fuel Type Group

By default no check boxes are selected, and airports are displayed in the airport list regardless
of the fuel/services available. Select one or more fuel types or services to display only the
airports with the selected fuel types or services in the airport list.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

64

Airport List

Repair Services Group

By default no check boxes are selected, and airports are displayed in the airport list regardless
of the repair services available. Select one or more repair services to display only the airports
with the selected services in the airport list.

Oxygen Group
By default no check boxes are selected, and airports are displayed in the airport list regardless
of the services available. Select one or more oxygen types to display only the airports with the
selected services in the airport list.

VFR Group
The VFR Group has the following selections:
Rotating Beacon

Displays respective airports that

have a rotating beacon.

Night VFR Capable

Displays respective airports that

are Night VFR capable. See
Airport Directory for further
details, airport hours of operations
and restrictions.

PPR

Displays airports that do not have

published hours of operations.
Prior Permission Required (PPR)
prior to use of such airports. See
Airport Directory for detailed
information about the specific
working hours and PPR
procedures.

Geography Tab
Use filters to limit the airports shown or searched for in the airport list to those with specific
characteristics such as geographic location, rectangle, circle, or within a specified corridor,
and other characteristics. Multiple Cities, States, and/or Countries can be entered as long as
they are separated by a comma only, with no spaces (a comma separated list). The
Geography Tab has the following selections:
Clear Tab Settings

Click to clear all selections made

under this tab.

Load

Click to load the filter you just set

up.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

65

Airport List

Clear All Filters

Location

Click to clear all filters and restore

to view all airports and charts.
Filters airports according to
entered search criteria. Type a
City, State, or Country in its
respective field. Once you have
entered a criteria, click OK.

Within Boundaries Defined By Group

Filters airports according to a selected location. When you set geographic area filters, an
outline appears on the enroute chart within which the airports in the airport list are located. The
default setting is No Geographic Area Filter. After you make all of your selections, click Save
and name the filter so you can use it again, or click Done to apply your selections but not
create a reusable filter. Selections include the following:

Rectangle

Filters airports within a rectangle.

Type the appropriate latitude and
longitude points for the northwest
and southeast corners.

Circle

Filters airports around a point.

Type the appropriate latitude and
longitude center point and the
radius distance.

Corridor

Filters airports around a route.

This is active only when a route is
displayed on the enroute chart.
To initially set the corridor of
width, you need to right-click the
route in the RoutePack List or on
the enroute chart and select
Show Approaches Within. If you
would like to make changes to the
corridor width, you can edit the
information in the Geographic tab
of the Filter Settings dialog box.

Coverages Tab
This selection is dimmed when there are no tailored coverages. Filters airports according to a
selected coverage. If a coverage is not selected, coverages are ignored when filtering.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

66

Airport List

Load an Airport List Filter

To load a previously saved airport list filter, in the airport list click Filters and click Load Saved
Filter.

Filtering Airports Using the Enroute Chart

This section describes applying geographic filters graphically using the enroute chart.

Applying a Rectangle Filter

To apply a rectangle filter:
1. Zoom and pan the enroute chart to show the area you want airports listed in the airport
list.
2. Right-click an open area on the enroute chart and click Use View as Geographic Area
Filter.
The airport list displays only airports that are within the current enroute chart.

Applying a Circular or Corridor Filter

To apply a circular or corridor filter:
1. On the enroute chart right-click any airport, navaid, route waypoint, or route and click
Show Approaches Within.
2. The Filter Setup dialog box displays with a field for entering the distance from the
selected item and a drop-down menu for choosing units of measure, enter a distance in
the Show Airports Within field and click OK.
3. In the airport list, click Filters > Geography and select from Circle or Corridor. You
can adjust the filter there.
4. Click Apply and then click Done.
A boundary line on the enroute chart depicts filtered area, and the airport list shows only
airports within the rectangle, circle or corridor. If you have any other airport filters defined in the
Airports tab, it may influence your results in the airport list.

Filtering Airports by Distance From

In the airport list, you can display only the airports that are located within a specified distance
from an airport, waypoint, or route.
1. Right-click any of the following:
An airport in the airport list or the RoutePack List.
A waypoint in the RoutePack List or the enroute chart.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

67

Airport List

2. Select Show Approaches Within. The Filter Setup dialog box displays with a field for
entering the distance from the selected item and a drop-down list for choosing units of
measure.
3. Enter the distance in the Filter Setup dialog box and select the units of measure.
4. Click OK.

Applying Airport Filter to the Enroute Chart

When you apply an airport filter to the enroute chart, the result is that whatever is filtered out of
the airport list, will be hidden from view. For example, If you apply a filter to display only the
military use airports on the enroute chart, all airports that are not military use will be hidden
from view. To apply the airport filter to the enroute chart in the airport list click Filters > Apply
Airport Filter to Enroute Chart.

Airport Favorites
The Airport Favorites feature is a user-defined filter that allows you to display or sort only
airports marked as a favorite in the airport list and hide the rest of the airports from view. The
airport list becomes more manageable by selecting the airports you use most often, and hiding
from view the airports you never access.

Creating a Airport Favorites List Filter

To create a airport favorites list filter:
1. Click Tools > Airport Favorites > New. This opens the New/Edit Airport Favorites
dialog box.
2. Enter a name for this airport favorites filter.
3. Sort on any column other than the Favorites.
4. Select (or clear) airports in the Favorites

column.

5. Click Save to save this airport favorites filter.

6. Click Done to close the dialog box.

Airport Favorites Dialog Box

The Airport Favorites dialog box has the following controls:

Select All

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Click to select all of the airports in

the favorites column for all
displayed airports. If an airport
filter is already in place, there
could be all or no airports being
displayed.

2015 Jeppesen, All Rights Reserved.

68

Airport List

Clear All

Click to clear all of the airports in

the favorites column.

New

Creates a new filter. This control

will also clear the name if one is
present but not saved.

Save

Saves the filter.

Done

Closes the dialog box and saves

the filter.

Cancel

Closes the dialog box without

saving.

Editing Airport Favorites

You can edit airport favorites filters to add or remove airports, or use a previously created filter
as a template to create a new filter.
1. Click the menu item Tools > Airport Filters > Edit. This opens the Airport Favorites
dialog box with all of your saved filters.
2. Select (highlight) the filter of interest, and click OK. This opens the New/Edit Airport
Favorites dialog box where you can edit the filter.
3. When all of the edits are made, click Save, and then click Done.

Deleting Airport Favorites

1. To delete an unwanted airport favorites filters click the menu item Tools > Airport
Filters > Delete. This opens the Delete Airport Favorites dialog box with all of your
saved filters.
2. Select (highlight) the filter of interest, and click OK. The filter is deleted.

Removing Airports Favorites

To remove the airport favorites filter, in the airport list, click Favorites > None.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

69

C HAPTER 5

Route Planning and RoutePacks

This chapter covers route planning, the RoutePack, the RoutePack structure, and how to
create and manipulate RoutePacks. RoutePacks enable you to collect and print enroute and
charts in the sequence that you would use them on a flight.
This chapter contains the following topics:
RoutePack Basics
Creating a Route
Creating a Route Using Point and Click
Creating a Route Using Plain Language Routing
Modifying a Route
Importing a RoutePack File
Showing the Route on the Enroute Chart
Understanding Other Airports
Showing the Distance From Here
Showing Alternate Airports
Filtering Charts in the RoutePack
Selecting Charts in RoutePacks
Deleting or Duplicating Routes

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

70

Route Planning and RoutePacks

RoutePack Basics
A RoutePack is a file that can be thought of as an electronic briefcase containing flight
information for one or more routes with their associated airports. RoutePack files can be
saved, closed, and opened for future use. A RoutePack contains either a single route, or a
collection of routes, alternate routes, and waypoints.

Registering RoutePack Files

When the application is first run, it looks for RoutePack files with the file extension "crf". If
these files are found, they are automatically registered to this application. These files will show
up with a RoutePack file icon. [Figure 5-1] If you do not want the RoutePack files registered
with this application, click Tools > Options > File Type tab, and clear the selection.

Figure 5-1 RoutePack File Icon

Renaming a RoutePack
Do one of the following:
To rename a saved RoutePack, right-click in the RoutePack list and click Open
RoutePack, and enter a new File Name
Right-click the RoutePack and click Rename.

Opening a RoutePack
To open a RoutePack do one of the following:
Right-click an open space in the RoutePack list and click Open RoutePack.
Click File > Open.
Click Load RoutePack File.
Press Ctrl+O.
Select the desired RoutePack or browse to a location and click Open.

Closing a RoutePack
Closing a RoutePack removes the RoutePack from the RoutePack list, but does not erase it
from your hard disk.
To close a RoutePack do either of the following:
Right-click the RoutePack folder and click Close All RoutePacks.
Select it and click File > Close All RoutePacks.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

71

Route Planning and RoutePacks

Cutting, Copying, and Pasting

Airports (which include all of that airports charts) can be pasted to a RoutePack from the
airport list. Airports and charts that are not part of the route or RoutePack can only be pasted
to the Other Airports folder.
Multiple RoutePacks can be cut, copied, and pasted from the clipboard into a single
RoutePack in the RoutePack list. The end result is that the content of the pasted RoutePacks
are merged into a single RoutePack including the contents of the Other Airports folder. The
right-click popup menu supports the paste function when a RoutePack is selected. Airport
charts being cut will only be removed when successfully pasted.

Printing RoutePacks
RoutePacks are printed as a part of a Trip Kit. See Printing a Trip Kit.

Deleting a RoutePack File

Since the RoutePack file is like any other files, you can delete it using standard operating
system tools. To delete using the apps tools:
1. To delete a saved RoutePack right-click in the RoutePack list and click Open. The
Open RoutePacks dialog box opens.
2. Select the RoutePack to delete and right-click and click Delete.

Registering RoutePack Files

When the application is first run, it looks for RoutePack files with the file extension "crf". If
these files are found, they are not automatically registered to this application. To automatically
register these files click Tools > Options > File Type tab, and select this check box. These
files will show up with a RoutePack type icon as follows.

Creating a Route
To create a Route:
1. Click File > New RoutePack or use the keyboard shortcut Ctrl+Q.
2. Enter a name for the RoutePack, and then click Save. The New RoutePack dialog box
opens. The options for creating a RoutePack are Point and Click or Plain Language. An
example of each follows.

Creating a Route Using Point and Click

In the following two examples we will create a RoutePack from Point of Departure (POD)
Seattle-Tacoma Intl Airport (KSEA) located in the state of Washington, to Point of Arrival
(POA) at Denver Intl Airport (KDEN) located in the state of Colorado.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

72

Route Planning and RoutePacks

Point and Click Example 1

There are many ways to create a RoutePack using the point and click method. Examples one
and two here step you through two ways. Experiment with other ways that may be better for
your usage.
To create a RoutePack, example 1, using the point and click method:
1. Click File > New RoutePack or use the keyboard shortcut Ctrl+Q.
2. Enter a name for the RoutePack, and then click Save.
3. On the New RoutePack dialog box click Add Route Point and Click.
4. In the airport list enter the ICAO of the departure airport (KSEA).
5. In the airport list double-click the airport icon.
6. On the enroute chart click on KSEA to select it as your POD. If there is more than one
object in the area the Select Nav Object dialog box will display so you can clarify your
selection.
7. Select the airport (not the VORTAC) from the list and click OK.
8. In the airport list double-click the KDEN icon.
9. On the enroute chart click on KDEN to select it as your POA.
10. You can also right-click any area of the enroute chart to create a new user waypoint.
These are designated in the RoutePack and on the enroute chart as WP 1, WP 2, etc.
11. Click File > Close All RoutePacks.

Point and Click Example 2

To create a RoutePack, Example 2, using the point and click method:
1. Right-Click in the RoutePack list and click New RoutePack or use the keyboard
shortcut Ctrl+Q.
2. Enter a name for the RoutePack, and then click Save.
3. On the New RoutePack dialog box click Add Route Point and Click.
4. Click any area of the enroute chart to create a new waypoint. If you click on an airport,
that airport is added to the route; other waypoints are added to the route as waypoints.
5. To complete your route right-click on the enroute chart and click Stop Appending
Waypoints.

Creating a Route Using Plain Language Routing

In the following example you will create a RoutePack from Point of Departure (POD)
Seattle-Tacoma Intl Airport (KSEA) located in the state of Washington, to Point of Arrival
(POA) at Denver Intl Airport (KDEN) located in the state of Colorado.
To create a RoutePack using the plain language method:
1. Click File > New RoutePack or use the keyboard shortcut Ctrl+Q.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

73

Route Planning and RoutePacks

2. In the File Name drop-down combo box select a RoutePack to modify, or in this case,
enter a name for the RoutePack you are creating. For this example name the
RoutePack KSEA to KDEN.
3. Click Save.
4. On the New RoutePack dialog box click Add Route Plain Language.
5. In the Route Information group box enter KSEA as the Departure and KDEN as the
Arrival.
6. Click in the name box and KSEA -> KDEN is automatically entered. At this point you
could accept the default name or rename it.
7. Add waypoints by typing their name or ID into the Waypoints group box. You can also
type the term DIRECT. You can remove a waypoint by removing it from any text box.
Changing a VIA field to DIRECT will change the airway to drop the waypoint and
change to direct.
8. Click OK. The RoutePack is added to the RoutePack and your route is shown in the
enroute chart.

Creating a Route Using Dot Notation Text Routing

The following example describes how to create a route using dot notation text, also known as
airway routing. You can enter point-to-point waypoints to complete your route. For example, to
create a route from Portland Intl, in Portland Oregon, to Klamath Falls, Oregon, do the
following:
1. Click File > New RoutePack or use the keyboard shortcut Ctrl+Q.
2. In the File Name drop-down combo box select a RoutePack to modify, or in this case,
enter a name for the RoutePack you are creating. For this example name the
RoutePack KPDX to KLMT.
3. Click Save.
4. On the New RoutePack dialog box click Add Route Text.
5. In the Enter Route Text box, enter the following text:
KPDX..BTG.V23.OED.V122.LMT..KLMT
6. Click OK.
Airways are separated by a single period (dot), as are SIDs and STARs. Two dots means
connect direct without an airway. For instance, KADW..ETAR denotes that the two airports are
to be connected directly without using an airway.
A route can also consist of waypoints. For instance, the example from step 5, without airports,
would look like the following using the single dot airway connect notation.
BTG.V23.OED.V122.LMT
In this example, you cannot omit waypoint OED because airways connect through established
navaids. An airway item cannot exist in the route list without valid entry and exit waypoints.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

74

Route Planning and RoutePacks

Modifying a Route
Once a route is created, you can modify it in a number of different ways.
Rubber band method.
Reordering waypoints.
Inserting waypoints.

Modifying a Route Using the Rubber Band Method

To insert a waypoint using the rubber band method on the enroute chart:
1. Point to the route line on the enroute chart.
2. Press the mouse button and, while holding it, drag the route to the desired waypoint or
area.
You do not have to drag the route to an existing waypoint. If you drag it to a location that is not
an airport, navaid, or intersection a new waypoint is created where you release the mouse
button. The new waypoint appears on the RoutePack list and the enroute chart redraws to
reflect the new route waypoint.
NOTE To change (not insert) a waypoint using the rubber band method,
grab the route line at a waypoint and drag it off that waypoint to a new
waypoint.

Reordering Waypoints
Waypoints can be moved into a different order by clicking and dragging in either the
RoutePack, or the route line on the enroute chart.

Inserting Waypoints
Once a route has been created, additional airports and waypoints can be inserted into the
route and existing waypoints can be changed.

Inserting Waypoints From the RoutePack List

Waypoints can be added to a route. To add right click on a route or airport in the RoutePack
list and click Find/Insert Waypoints. This opens the Nav Data Search dialog box. For more
information see User-Defined Waypoints.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

75

Route Planning and RoutePacks

Inserting Waypoints from the Airport List

Airports can be added to a route from the airport list. This adds charts for alternate airports. To
add:
1. Right click the airport and click Add Airport Terminal Charts to.
2. If all of the charts do not need to be added, expand the airport list and select only the
charts to add. If there is more than one route, select the route to which the charts are to
be added.

Route Delete
Completely removes the entire route and all of the route sub-items.

Route Drag and Drop

A route can be dragged and dropped. Only routes with two or more waypoints can be dragged
and dropped.

Importing a RoutePack File

RoutePack files that were created in another Jeppesen application can be imported. Click File
> Open RoutePack (Ctrl+O), browse to the location, select that RoutePack and click Open.
Files that were in the RPK format will be converted to the Common Route Format (CRF).

Showing the Route on the Enroute Chart

To show the RoutePack and route on the enroute chart, open a RoutePack and click the
enroute chart tab. Right-click the route (not the RoutePack) and click Activate and Show or
use the keyboard shortcut Ctrl+R.
With multiple routes in the same RoutePack, the route with a check mark is shown on the
enroute chart. If the box is not selected, the route is hidden, or not shown. An active route
cannot be hidden (the box cannot be cleared).

Alternate Route
You can add alternate routes to a Primary Route or from any waypoint or airport in a route to
an alternate airport or other user defined waypoint. An alternate route is stored in the
RoutePack structure. Alternate routes can be cut and copied as well as being dragged and
dropped. Alternate routes can be pasted to a route if it has an airport identical to the first
alternate airport. Alternate routes can be moved using drag and drop the same way as they
can be pasted. An alternate route being cut will only be removed when successfully pasted.
You cannot delete the first airport in an alternate route.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

76

Route Planning and RoutePacks

Add Alternate Route Example

To add an alternate route to the following example route from departure airport located in
Saarbrucken (EDDR), in Germany to destination airport located in Keflavik (BIKF), in Iceland:
1. Right-click on the route destination airport ICAO identifier BIKF and click Plan
Alternate for or click Route > Plan Alternate.
2. In the Plan Alternate dialog box, from the Alternate Type group, select Destination
Alternate.
3. Enter the ICAO designation for Reykjavik, which is BIRK. Because Keflavik is an
alternate, select all search options, and set the Search Radius to 100 NM.
4. Click Search. BIRK (REYKJAVIK) is added to the alternate list. At this point you could
keep adding alternate airports, but for this example, click OK.
5. The alternate airport is added to the destination airport of the Primary Route. To remove
an alternate, right-click and click Delete Alternate.

Understanding Other Airports

The Other Airports folder contains charts for airports that are not on the route. The charts in
the Other Airports folder are never the departure or arrival airport charts. Other chart items can
be cut and copied as well as being dragged and dropped. Other chart items can be pasted to
a route if it has an airport identical to the first alternate airport. Other chart items can be moved
using drag and drop the same way as they can be pasted. Other chart items being cut will only
be removed when successfully pasted.

Adding Other Airports

For example, if charts for Stansted and Heathrow are added to a route from Shannon to
Frankfurt, the Stansted and Heathrow charts are placed in the Other Airports folder. In the
airport list enter ICAO identifier EGSS, right-click the airport or specific chart and select Add
EGSS Terminal Charts to EINN to EDFF. Do the same for EGLL. The charts for Stansted
(EGSS) and Heathrow (EGLL) are added to the Other Airports folder because they are not on
the EINN to EDFF route.

Printing Charts in the Other Airports Folder

Items in the Other Airports folder default to only airport printable items: charts, chart revision
letters, and airport information.

Adding to RoutePack Column in the Airport List

In the airport list the column marked with a briefcase
is the Add to RoutePack column.
This column applies to the currently active RoutePack, and is always the parent RoutePack of
the currently active route, and is indicated in boldface type. The check box next to each chart
in the airport list indicates if that chart is present anywhere in the RoutePack.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

77

Route Planning and RoutePacks

If the check box next to an airport:

Has a dark check mark if all of that airport's charts are in the RoutePack.
Has a gray check mark if some of the airport's charts are in the RoutePack.
Has no check mark if none of the charts are found anywhere in the RoutePack.
If you select a check box next to a chart, that chart is added to every occurrence of its parent
airport in the RoutePack. If its parent airport is not in the RoutePack, it is added to the Other
Airports folder. If you clear a check box next to a chart, every occurrence of that chart is
removed from the RoutePack, including any occurrence of that chart in the Other Airports
folder. If you select or clear a check box next to an airport, it is the same as selecting or
clearing a chart, except the operation will apply to every chart belonging to that airport.

Showing the Distance From Here

The Show Distance From Here feature allows you to find the distance between airports. Select
an airport from the airport list. Right-click an airport in the RoutePack list and select Show
Distance From Here. The airport list is reordered with the corresponding distances.

Showing Alternate Airports

Select an airport in the RoutePack list and right-click it and select Show Approaches Within.
When the dialog box opens, select the distance and click OK. The airport list is filtered to only
show airports that meet that criteria.

Showing Approaches Within

To display only the airports that are located within a specified distance from an airport,
waypoint, or route.
1. Right-click an airport or waypoint in the RoutePack list.
2. Click Show Approaches Within. The Filter Setup dialog box displays with a field for
entering the distance from the selected item and a drop-down list for choosing units of
measure.
3. Enter the distance in the Filter Setup dialog box and select the units of measure.
4. Click OK. The airport list displays the airports located within the distance entered.

Filtering Charts in the RoutePack

Filtering charts for a RoutePack is just like filtering charts for airports; the idea is to reduce
clutter by limiting the charts to the ones you need. Once the filter settings are in place, the
filters automatically work for newly created RoutePacks and can be implemented on
established RoutePacks.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

78

Route Planning and RoutePacks

Setting Filters
To filter charts for a route:
1. Open the Detailed Chart Filter Settings dialog box (see Filtering Terminal Charts).
2. Select or clear the desired charts.
3. Click OK.
Although terminal chart preferences have been set for future RoutePacks, they have not yet
been applied to the current RoutePack list. To apply these preferences to the current
RoutePack, continue with the next topic.

Applying Filters to Existing RoutePacks and Airports

To apply terminal chart preferences to previously created RoutePacks and routes, and to view
charts for RoutePacks created in other Jeppesen applications:
1. Right-click a RoutePack or a route in the RoutePack list to which you want to apply the
filter.
2. Select Reset Charts to Chart Filters.
To apply terminal chart preferences to the departure or destination airport in a previously
created RoutePack or route:
1. Right-click the airport to which you want to apply the filter.
2. Select Reset Charts to Departure Chart Filter or Reset Charts to Destination Chart
Filter.
The selected item now contains only the types of charts selected in the Detailed Chart Filter
Settings dialog box.

Resetting Default Chart Type Selections

After filtering charts in the RoutePack list, you may want to return to the default setting for
chart types. You can reset chart types for departure, destination, or alternate airports as well
as those for other enroute airports in a route. See Filtering Terminal Charts.

Setting the Chart Types for Other Airports

For other enroute airports in a route, not a departure, destination, or alternate chart filter
settings are the same as those set in the Default tab of the Detailed Chart Filter Settings dialog
box. See Filtering Terminal Charts.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

79

Route Planning and RoutePacks

Selecting Charts in RoutePacks

Instead of placing a filter on the RoutePack to display certain charts you can manually remove
and select specific charts by utilizing the delete function. This method is beneficial if you want
to verify you are not missing any charts that might have been removed by the filtering system.

Deleting Charts from a RoutePack

Deleting charts from an airport in the RoutePack list essentially hides them, so they are not
printed. They can be un-hidden by resetting the RoutePack, route, or airport.
To delete a chart from the RoutePack:
1. Expand the RoutePack and the airport to display all the charts.
2. Select one or more charts.
3. Do one of the following:
Right-click on a selected chart and select Delete.
Press the Delete key.

Removing Charts Using the Airport List

To verify you are seeing all the charts in the airport list, click Filters > Show/Hide Chart
Types in the airport list and verify all chart types are displayed.
To use the airport list to display or hide charts in the RoutePack:
1. In the airport list, click the Add to RoutePack column marked with a briefcase. This is
one way to find the airports associated to your route since all your airports in the
RoutePack are automatically selected in the airport list. Once you click the column
heading, you will have to scroll to the top or bottom of the list depending on how your list
is sorted.
2. For the airport you want to remove charts from, expand the list to display all the charts.
Next to each chart, each check box is selected in the Add to RoutePack column
because they are currently displaying in the route.
3. By clearing the check box next to a chart, it removes the chart from the route.

Displaying Hidden Charts in the Route

If you have a RoutePack filter in place, you may not see all the charts when conducting this
process for a departure, destination, or alternate airport. You may also want to verify there are
no terminal chart filters in place in the airport list by clicking Filters > Show/Hide Chart Types
in the airport list and ensuring all chart types are displayed. See also Filtering Terminal Charts.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

80

Route Planning and RoutePacks

Flight Planning
Flight Planning is used to modify Routes. For example, the route KWRI-KADW as shown
below [Figure 5-2] will be modified using Flight Planning.

Figure 5-2 Example Modified Route

Click the route line to select it. The route line changes color when selected as shown in Figure
5-3.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

81

Route Planning and RoutePacks

Figure 5-3 Example Selected and Highlighted Route

Appending Waypoints to a Route

With a RoutePack open, click where you would like to append a waypoint of the RoutePack.
Select Route > Edit > Append Waypoints or Stop Appending Waypoints. The curser
changes shape as shown in Figure 5-4.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

82

Route Planning and RoutePacks

Figure 5-4 Example Curser Shape Change

Click on KLNS, select the airport and click OK. The waypoint is appended as shown in Figure
5-5.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

83

Route Planning and RoutePacks

Figure 5-5 Example Appended Waypoint

To stop appending waypoints select Route > Edit > Append Waypoints or Stop Appending
Waypoints.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

84

Route Planning and RoutePacks

Adding to a RoutePack Using Plain Language Routing

With a RoutePack open, click the top element of the RoutePack and use the following steps:
1. Click Route > Add Route.
2. Name the route.
3. Click Add Route - Plain Language.
4. Enter the Waypoint VIA DIRECT to KLNS as shown in Figure 5-6.

Figure 5-6 Example Plain Language Flight Plan Dialog Box

5. Click OK. As a result of adding the KLNS waypoint, the route is changed as shown in
Figure 5-7.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

85

Route Planning and RoutePacks

Figure 5-7 Example Resultant Route

Deleting or Duplicating Routes

Right-click on a route and click Delete to remove the route. Duplicate creates an identical
route and adds it to the RoutePack.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

86

C HAPTER 6

Weather
This chapter contains the following topics:
Live Weather Options
Weather Map Controls
Looping Weather
Weather Legend Basics
Weather Products

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

87

Weather

Live Weather Options

To display or hide the weather options click Weather > Options > Setup Tab. [Figure 6-1]

Figure 6-1 Live Weather Options Setup Tab

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

88

Weather

Setup Tab
The Setup tab has the following options:
Enable Live
Weather

Select or clear to enable or

disable live weather.

Weather types to be
downloaded

Select or clear the various

weather products that you want
available to be shown on the
enroute chart. Selecting these
options does not display them
on the chart, it only tells the
application which weather types
to retrieve from the Jeppesen
weather servers. Selecting
fewer weather types will reduce
the amount of data you
download.

Exclude weather
data above altitude

Select from the drop-down list

the maximum altitude for the
weather that you need. For
many weather types, selecting a
lower altitude will reduce the
amount of data you download.

Time loop speed

Use to change the weather time

loop speed.
See Looping Weather.

Regions Tab
Use the Regions tab to change the regions where weather is collected. On this tab you can
also limit the number of regions to reduce the amount of data that is downloaded to your
computer from the Jeppesen weather servers.
To select the weather regions to download:
1. Click Weather > Options > Regions tab.
2. Click either All Regions, or to reduce the amount of data downloaded to your computer
select the regions of interest. At least one region must be selected.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

89

Weather

Status Tab
The Status tab is used to confirm the status of receiving weather products from the Jeppesen
weather servers. You can also stop and start the Jeppesen Weather Controller (JWC) using
this dialog. [Figure 6-2]
When weather products are downloading the download indicator will rotate. After the weather
products are downloaded, and even when they are downloading in the background, it will
become a green static icon. A static gray indicator means a connection has been lost.

Figure 6-2 Live Weather Options Status Tab

In case the Jeppesen Weather Controller (JWC) service has been stopped for any reason, you
can start it by:
1. Clicking Weather > Options > Status tab.
2. Click Start JWC.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

90

Weather

Weather Map Controls

To view the weather map controls click Weather and select Weather Map Controls. To hide,
click Weather and clear the Weather Map Controls. Click the small down arrow on the
Weather Map Controls dialog box and click Hide Weather Map Controls. [Figure 6-3] To
arrange the panels vertically, right-click on the control and select Arrange Vertically. Click the
small down arrow on the Weather Map Controls dialog box and click Arrange Vertically.

Figure 6-3 Weather Map Controls Dialog Box

Weather Data Group

The Weather Data group shows what weather products are available, and what weather
products are selected to be shown on the chart. When weather products are downloading the
download indicator contains the same data download indicator icon, with its three different
states, as explained in the topic Status Tab.
If the selected weather product is dimmed, it means that no data has been downloaded for that
weather product. The text label will turn black when data for that weather type has been
downloaded. Depending on download speeds, this may take a little time. If the text does not
turn black within a few minutes, this could be because there is no data reaching the Jeppesen
Weather Controller.
Once data for a weather product has downloaded and is available for the selected altitude and
time, its text background will turn green. [Figure 6-4]
Mouse over a weather product to see a blue highlight showing at which altitudes that weather
product is available, and the time span for which it is available. [Figure 6-4] Some weather
products are only available at certain altitudes. Some weather products are valid for longer
time periods than others.
To hide the Weather Data group panel, right-click the control and select Hide Weather Data
Panel. You can also click the small down arrow on the Weather Map Controls dialog box and
click Hide Weather Data Panel.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

91

Weather

Figure 6-4 Altitudes Icing Available Example

Each of the weather products can be displayed or hidden by selecting or clearing them in the
Weather Data panel. They can also be turned off or on from the Display Weather Types menu
option, or by turning them on or off using the Weather Toolbar buttons.

Display Altitude Group

Some weather products are altitude dependent. For example, the winds and turbulence are
different at different altitudes. Use the altitude slider to select the weather product viewing
altitude. Other weather products, such as Lightning, are not altitude dependent; these
products will display the same data wherever the altitude slider is positioned. To set the upper
limit of the altitude slider click Weather > Options > Setup tab, and set Exclude weather
data above altitude to your maximum altitude. The darker green color on the slider indicates
the altitudes at which all of the selected weather products are available for display on the
chart. [Figure 6-3]
The lighter green color indicates those altitudes for which only some of the selected weather
products are available. You can identify which altitude ranges are covered by specific products
by doing a mouse-over on the product names in the Weather Data panel and noting which
bands are colored blue.
The gray color indicates altitudes for which none of the selected weather products are
available. At start-up, when weather data begins to load, large altitude bands may be colored
gray. These bands will turn green as data is downloaded.
To hide the Display Altitude group panel, right-click the control and select Hide Altitude
Slider. You can also click the small down arrow on the Weather Map Controls dialog box and
click Hide Altitude Slider.

Display Time Group

Use the time slider to select the time you want to view the weather data. [Figure 6-3] Different
weather products have data that is valid for different time ranges extending into the past and
into the future. Turbulence data, for example, tends to be valid for a longer time span, covering
many hours. Lightning data, however, is much shorter and tends to be valid for less than two
hours.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

92

Weather

The darker green color on the slider indicates the time span during which all of the selected
weather products are valid and therefore available for display on the chart. The lighter green
color indicates those times during which only some of the selected weather products are
available. You can identify which time periods are covered by specific products by doing a
mouse-over on the weather product name in the Weather Data panel and noting which bands
are colored blue.
The range of the time slider adjusts as different weather products are selected or unselected,
and as old data expires and new data is downloaded. When you select a position on the time
slider, the selected display time is shown in bold text, and below it is the time offset (past or
future) from your current system time. If you leave the time slider in one position, it will attempt
to keep the time offset constant. For example, if you position the time slider two hours into the
future, it will stay positioned at two hours in the future, and your map will continue to display
weather data for two hours in the future.
Click Present to move the time slider to the present time. It will remain set to the present time
until the time slider is moved. To hide the Display Time group panel, right-click the control and
select Hide Time Slider. You can also click the small down arrow on the Weather Map
Controls dialog box and click Hide Time Slider.

Looping Weather
Click Loop to play a repeating time loop display of the selected weather products, progressing
from the past into the future. To vary the loop speed click Weather > Options > Setup tab,
and adjust the Time Loop Speed.

Weather Legend Basics

To view the weather legend display click Weather and select Weather Legend; clear to hide
the weather legend display. You can also click the small down arrow on the Weather Legend
dialog box, or right-click the Weather Legend dialog box, and click Hide Weather Legend.
The weather legend explains the colors and symbols used to depict the different weather
products on the map.
When the map is viewed at different zoom levels, the colors used to depict some weather
products may be adjusted for optimal viewing. The equivalent colors in the weather legend will
also adjust. The weather legend can be repositioned by dragging it around, and even onto a
second monitor. The weather legend header bar contains the same data download indicator
icon, with its three different states, as explained in the topic Status Tab. The weather legend
will not display if there are no weather products selected for display on the map.
The weather legend has three different legend view settings. [Figure 6-5] Right-click, or click
the small down arrow, and select from Full Legend, Abbreviated Legend, or Legend Header
Only. At the larger view setting (Full Legend) the legend can be resized by click and drag, and
will scroll if necessary to show its contents. The header bar is present in all size settings, and
shows the current settings for weather display altitude and weather display time.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

93

Weather

Figure 6-5 Weather Legend Display

Right-click on the weather legend, or the enroute chart, and select to show or hide. This can
also be done using the Weather menu.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

94

Weather

Weather Products
The Jeppesen weather products consist of the following types with associated weather
legends.

Turbulence
Areas expected to experience light turbulence are green. Areas expected to experience light
to moderate turbulence are yellow. Areas expected to experience moderate to severe
turbulence are red. Areas expected to experience severe turbulence are purple. The
turbulence weather product is updated every hour, and available between 30 and 45 minutes
past each hour. See Figure 6-5.

Lightning
Lightning discharges are depicted graphically using data from the North American Precision
Lightning Network (NAPLN) and the World Wide Lightning Network (WWLN). the networks
include cloud-to-ground, as well as in-cloud, cloud-to-cloud, and cloud-to-air discharges. The
lightning weather product includes all lightning strikes over the past 10-minute period. See
Figure 6-5.

Winds
The wind weather product depict the analysis or forecast of upper level winds. Wind speed
and direction is depicted using the standard wind flags. Wind speed is calculated by adding all
of the shaded triangles (50 kts each), and wind barbs (10 kts for a full barb and 5 kts for a half
barb) on each flag. For example, two triangles and one barb would represent a wind speed of
110 kts. Wind direction is determined by the orientation of the flag. Wind blowing from the tail
of the flag (where flags are) to the head of the flag (where the dot is).
Wind flags are positioned at the optimum resolution for the map area. Most flags are placed
every 2.5 degrees of latitude (150 nm) and longitude. For smaller geographic areas such as
the regional United States maps, flags are placed every 75 nm.
The wind product overlay is created based on the availability of numerical model data. For the
United States, analysis overlay are updated hourly. Forecast winds are updated every six
hours based on model run times of 0000, 0600, 1200, and 1800 UTC. Wind forecast times of
06, 12, 18, 24, 30, 36, 42, 48, 60, and 72 hours are available approximately 4 to 6 hours after
the model run time. Upper level wind weather products are generated for the following
atmospheric levels:

AltitudePressure
FL05050 mb

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

95

Weather

FL100700 mb
FL180500 mb
FL240400 mb
FL300300 mb
FL340250 mb
FL390200 mb
FL450150 mb
See Figure 6-5.

Icing
Areas expected to experience trace to light icing are light blue. Areas expected to experience
light to moderate icing are medium blue. Areas expected to experience moderate to severe
icing are dark blue. Icing weather products are updated four times per day and are valid at
0400, 1000, 1600, and 2200 UTC. See Figure 6-5.

Radar Echo Tops

Available for the Contiguous United States (CONUS) only. Excludes the states of Alaska and
Hawaii, and all off-shore U.S. territories and possessions, such as Puerto Rico. The echo tops
weather product is depicted with 16 colors, from gray (surface) to purple (70,000 ft) that
indicate the altitude in thousands of feet of the maximum precipitation returns.
Echo tops depict the height, in thousands of feet, of the highest echo returns. Different colors
are used at 5000 foot intervals from the surface up to 70,000 feet. Echo Tops represent the
tops of the actual precipitation, not cloud tops. Sometimes cloud tops can be higher than echo
tops but do not contain precipitation. The Jeppesen echo tops weather products are national
or regional mosaics which combine the information from individual radar sites. See Figure 6-5.

NEXRAD Winter Mosaic

Available for the Contiguous United States (CONUS) only. Excludes the states of Alaska and
Hawaii, and all off-shore U.S. territories and possessions, such as Puerto Rico. The NEXRAD
weather product depicts three precipitation types: rain, mixed precipitation, and snow. They
are depicted using three distinct color palettes of 16 colors each to show increasing
precipitation intensity. See Figure 6-5.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

96

Weather

The NEXRAD weather product depicts base reflectivity in unique color schemes so that you
can differentiate between rain, mixed precipitation, and snow, during winter months. A
complex computer algorithm uses NEXRAD base reflectivity and identifies areas where snow,
freezing rain, and mixed precipitation is falling. Rain is depicted using 16 colors ranging from
dark green (light rain) to yellow (moderate rain) to dark red (heavy rain). Mixed precipitation or
freezing rain is depicted using 16 colors ranging from light pink (light) to pink (moderate) to red
(heavy). Snow is depicted using 16 colors ranging from light blue (light snow) to blue
(moderate snow) to dark blue (heavy snow). The NEXRAD weather product is created every 6
to 10 minutes and contains the most recent NEXRAD information. See Figure 6-5.

AIRMETs
An AIRMET (Airmen's Meteorological Information) is a concise description of the occurrence
or expected occurrence of specified en route weather phenomena which may affect the safety
of aircraft operations, but at intensities lower than those which require the issuance of a
SIGMET.
Compared to SIGMETs, AIRMETs cover less severe weather: moderate turbulence and icing,
surface winds of 30 knots, or widespread restricted visibility. AIRMETs are broadcast on the
ATIS at ATC facilities, and are referred to as Weather Advisories. AIRMETs are valid for six
hours. See Figure 6-5.

SIGMETs
A SIGMET (Significant Meteorological Information) is a weather advisory that contains
meteorological information concerning the safety of all aircraft. There are two types of
SIGMET: convective and non-convective. The criteria for a non-convective SIGMET to be
issued are: severe or greater turbulence over a 3000 square mile (7800 km2) area, or severe
or greater icing over a 3000 square mile (7800 km2) area or IMC conditions over a 3000
square mile (7800 km2) area due to dust, sand, or volcanic ash.
This information is usually broadcast on the ATIS at ATC facilities. A SIGMET is a forecast
valid for up to four hours. They are assigned an alphabetic designator from N (November)
through Y (Yankee), excluding S and T. See Figure 6-5.

METARs & TAFs

METARs (Aviation Routine Weather Reports) and TAFs (Terminal Aerodrome Forecasts)
information consists of surface observation reports providing information on current sky and
weather conditions. As the view is zoomed out only the METARs at larger airports are shown.
As you zoom in and out METARs alpha-blend and become more or less transparent so as to
not clutter or obscure the enroute chart. In addition, if a METAR is too close to another
METAR which has already been shown the METAR is skipped. This is done to declutter your
enroute chart.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

97

Weather

To see past weather you will need to clear live weather and move the slider to the past.
Because the slider has to cover weather 5 minutes in the past to 72 hours in the future, the
granularity of the slider will only allow you to see some of the past weather maps. The weather
legend for METARs shows the age of the most recent METAR received by the application.
METAR data for an individual airport may be older than the age shown in the legend.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

98

C HAPTER 7

Printing
This chapter covers the print features. This chapter contains the following topics:
Printer Guidelines
Printer Page Settings
Jeppesen Paper for Printing Charts
Printing Terminal Charts
Printing a Trip Kit
Printing Terminal Chart Change Notices
Printing Vector Charts

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

99

Printing

Printer Guidelines
Some Jeppesen charts include complex and dense graphical information that exceeds the
capabilities of some printers. Due to the demanding print requirements some printers or printer
configurations (printer drivers) have proven inaccurate. The following guidelines may be
helpful.
IMPORTANT

This application only supports the viewing of PDF files using

the free Adobe Reader, which is available for free download
from www.adobe.com.
If you do not already have Adobe Reader installed on your
computer, you must download Adobe Reader if you intend to
create and view PDF file-based Trip Kits with e-Link, eCharts,
or JeppView version 5.0.

IMPORTANT

Always use the Jeppesen Format Print Driver when printing.

For example, to verify this driver is enabled select File >
Print > Print Enroute Chart, click Properties, and select the
Jeppesen Format Print Driver.

Many print problems, especially problems in which the entire image has not printed, are due to
not enough printer memory. Printers that load a full page of data into the printer memory, such
as Postscript and HP-GL/2 type printers, require at least 3 MB of printer memory. Many printer
manufacturers recommend 6 MB of printer memory for complex graphics, especially when
printing at 600 dpi. In some cases, changing the printer properties improves printing
performances or eliminates problems. Try the following options (if they are supported in your
printer and printer driver software):
Change the graphics mode to Use Raster Graphics.
Change the True Type font option to Print True Type as Graphics.
Adjust the printer memory tracking to Aggressive.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

100

Printing

Printer Page Settings

When no selection is made charts print scaled to fill an entire page. To print in single-page
mode, clear the Two per page check box.
Prints two charts on each page, maximizing each chart on its
half of the page, in one of the following ways:
KneeboardPrints with standard margins, designed for
use with chart clipboards.
Jeppesen Paper (2 up)Prints to Jeppesen 8.5 x 11inch paper with 7-hole punches down the center and
edge (Jeppesen part # AJV33003) for placement in
Jeppesen binders.
Two per page

Jeppesen Paper (1 up)Prints to Jeppesen 8.5 x 11inch paper with 7-hole punches down the left and right
edges showing one chart upside down (Jeppesen part #
AJV33002) for placement in Jeppesen binders.
BookletPrints charts in a sequence that allows you to
fold all the printed sheets in the middle and place the
charts in an 8.5 x 5 inch booklet format. In order for the
Booklet option to be available you must select Print on
both sides.

Print on
both sides
Output to this
printer

Print on both sides enables duplex printing, if your printer

and print driver supports it. This option is dimmed if your
printer does not have duplex printing capability. Print on both
sides automatically sets your printer to duplex printing mode.
Always select the Jeppesen Format printer.

Jeppesen Paper for Printing Charts

Jeppesen sells two special paper styles for binders. Both styles are 8.5 x 11, with a microperforation down the middle.

Jeppesen # AJV33003 2 up printing

Jeppesen # AJV33003 paper has 7-hole punches down the center and edge for Jeppesen
Paper (2 up) printing option. You can print two charts, both right-side up on the same page,
maximizing each chart on its half of the page. Margins include room on the left of each chart
(center and left edge of the page) for 7-hole punch and placement in Jeppesen binders.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

101

Printing

Jeppesen # AJV33002 1 up Printing

Jeppesen # AJV33002 paper has 7-hole punches down the left and right edges for the
Jeppesen paper (1 up) printing option. After printing, when you separate the charts at the
perforation, the left side of each chart is next to the punched holes on the edges of the paper.

Printing Terminal Charts

Charts can be printed from the terminal charts view, RoutePack list, or airport list. If you want
to print charts in a Trip Kit, see Printing a Trip Kit.

From Terminal Charts Tab

To print from the Terminal Charts tab click File > Print > Print Terminal Chart or use
keyboard shortcut Ctrl+P.

From the RoutePack List or Airport List

To print from the RoutePack list or airport list, do the following:
1. Select the charts for the same airport in the airport list or RoutePack list.
2. Open the Print dialog box and click File > Print > Print Terminal Charts.
3. Select how the charts will be printed. See Printer Page Settings.

Printing a Trip Kit

A Trip Kit is a collection of charts and information that can be printed together for one or more
routes in a RoutePack. The portion of the enroute chart that encompasses the routes in your
Trip Kit are sliced up and printed on a number of pages that follow the order of your route;
these pages are called strip charts.
To print the Trip Kit:
1. Do one of the following:
Right-click the top element of the RoutePack and click Print.
Select the top element of the RoutePack and click File > Print > Print Trip Kit.
2. Select the items to print.
3. Click OK.

Printing Terminal Chart Change Notices

1. From the airport list, select an airport.
2. Click the Change Notices tab.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

102

Printing

3. If there are any chart change notices, the change notice will show up in the Change
Notices view.
To print from the RoutePack list or airport list do the following:
1. Select the charts for the same airport in the airport list or RoutePack list.
2. Open the Print dialog box by clicking File > Print > Print Terminal Charts.
3. Select how the charts will be printed. See Printer Page Settings.

Printing Vector Charts

Theme

Departure and
Destination
Entire Route

Prints the charts on a selected theme by using the drop-down

menu. The default choice is the theme currently displayed on
the enroute chart. The printed charts may not reflect all the
chart elements displayed in the enroute chart due to
decluttering issues, but the program does take into account
the chart preferences.
Prints the departure and destination at a 1:250,000 scale.
Includes an overview chart showing the entire route in the
Trip Kit, including numbered depictions of each enroute page
in the Strip Charts printout.
Prints your entire route in sequential pages, at one of
seventeen scales ranging from 1:2,084 to 1:134,775,469.
Specify any theme scale with any theme. Beside some of the
theme scales is a note of whether it depicts the scale of printed
charts:

Strip Charts

(**)Notes a user defined scale printing the strip charts

to the scale drawn in the enroute chart.
LAEIFR Low Altitude Enroute Chart.
HAEIFR High Altitude Enroute Chart.
WACWorld Aeronautical Chart.
SECVFR Sectional Chart.

NOTE The amount of paper required to print the charts will depend on the
scale you choose, the length of your route and your page setting
selection.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

103

C HAPTER 8

Tools
This chapter focuses on tools that were not covered in other sections.
This chapter contains the following topics:
Range Bearing
User-Defined Waypoints
Sunrise Sunset Tool
Unit Converter Tool

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

104

Tools

Range Bearing
To configure the Range Bearing setup click Tools > Options > Range Bearing. The Range
Bearing tab has the following selections:
Heading Units

Select measurement type.

Line Thickness

Select from Thin, Normal, or

Thick.

Line Type

Select either Solid or Dashed.

Colors

Select from standard colors, or

create a custom color.

Endpoint Symbol

Select a symbol from the

pull-down list.

Anchor Mode
Anchor Mode makes range bearing anchor type measurements. The color and line thickness
of the Range Bearings in Anchor Mode can be changed using Tools > Options > Range
Bearing. Click Anchor Mode to expand a drop-down menu with the following options: Point to
Point, Measurement Only and Remove All. You can also click Enroute > Range Bearing and
see a sub-menu of options.

Point to Point
Point to Point drops anchors and creates a sticky line measurement. [Figure 8-1.] Delete a
single point to point by clicking an anchor point and using the right-click delete.

Figure 8-1. Point to Point Measurement

Measurement Only
For measurement only, you can use the anchor mode button, or hold down the keyboard Shift
key while performing a click-and-drag action with the mouse. [Figure 8-2.] Measurement Only
works the same as Point to Point but is not "sticky".

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

105

Tools

Figure 8-2. Measurement Only

Remove All
Removes all measurements from the enroute chart.

Moving an Anchor Point

To move or reposition an anchor point click on a measurement anchor point and drag it to a
new location as shown in the Figure 8-3. example.

Figure 8-3. Before and After Moving an Anchor Point

Centering on an Anchor Point

To center on an anchor point, right-click on any anchor point and select Center On.

Making Changes to Range Bearing

You can change the look and color of the range bearing lines and symbols by clicking Tools >
Options > Range Bearing.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

106

Tools

Range Bearing Properties

Right-click on any anchor point and select Properties.

User-Defined Waypoints
A user-defined waypoint is a waypoint created by you, and used to define a waypoint in a
route, or to mark locations of interest on the enroute chart. They can be set, modified, hidden,
shown, and deleted. User-defined waypoint characteristics are displayed in the User Waypoint
Properties dialog box.
User-defined waypoints can be cut and copied, as well as dragged and dropped. A userdefined waypoint being cut or dragged will only be removed when successfully pasted or
dropped.

Adding a User-Defined Waypoint

1. To add a user-defined waypoint do one of the following:
Click Add User Waypoint

. This changes the curser to the user-defined type

Right-click on the RoutePack, route, airport, or the graphic route on the enroute chart
and click Append or Stop Appending Waypoints.
On the keyboard press Ctrl+M. This changes the curser to the user-defined type.
2. The curser will change shape over the enroute chart to look like this
. Select where
on the enroute chart you want to add the user-defined waypoint and click the mouse. A
new user-defined waypoint is added to the enroute chart at the location you selected.
3. Double-click the new user-defined waypoint or right-click and click Properties.
4. Optionally type a Name for the user-defined waypoint as you want it to appear on the
enroute chart.
5. Optionally change the latitude and longitude fields to pinpoint a more exact location.
6. Optionally change the user-defined waypoint icon by selecting one from the pull-down
list.
7. When you are done making your selections, click OK to save the user-defined waypoint
and exit the dialog box.

Modifying a User-Defined Waypoint

Characteristics of a user-defined waypoint can be changed.
To modify a user-defined waypoint:
1. Right-click a user-defined waypoint on the enroute chart or in the RoutePack list and
click Properties.
2. Change any of the fields (text boxes) in the User Waypoint Properties dialog box.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

107

Tools

3. Click OK to save the information and close the dialog box.

Clicking New in the User-Defined Waypoint dialog box creates a new user-defined waypoint
with no lat/lon position. Enter the lat/lon position, and make any optional changes.

Pasting a User-Defined Waypoint

When you copy/cut and paste to a user-defined waypoint, the item prepends to that waypoint.
Pasting to a route appends the object to the route.

Deleting a User-Defined Waypoint

Deleting a user-defined waypoint removes the user-defined waypoint and all of its sub-items.
To delete a user-defined waypoint, right-click the user-defined waypoint in either the enroute
chart or RoutePack list and click Delete (name of the user-defined waypoint.

Changing a User-Defined Waypoint Location

To change the location of a user-defined waypoint, do one of the following:
Click and drag the user-defined waypoint to a new location.
Right-click a user-defined waypoint in either the enroute chart or RoutePack list and
select Properties, then change the Lat/Lon position.

Changing the Default Waypoint Icon

To change the user-defined waypoint icon right-click the user-defined waypoint and select
Properties, then change the icon.

Centering on a Waypoint
To center on a user-defined waypoint right-click the user-defined waypoint in either the
enroute chart or RoutePack list and click Center On.

Showing Airports Near a Waypoint

Right-click a waypoint and click Show Approaches Within. Enter or change the distance and
select the scale from the pull-down list. The airport list updates with airports that meet the
search criteria.

Showing Distance from a Waypoint

Select an airport from the airport list. Right-click a waypoint and click Show Distance From
Here. Scroll to the Distance column in the airport list.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

108

Tools

Printing a Waypoint
Only airport printable items can be printed: charts, change notices, revision letters, and airport
information. Waypoints and user-defined waypoints cannot be printed.

Sunrise Sunset Tool

Click Tools > Sunrise/Sunset. Enter a waypoint for the waypoint time, or enter a character
string to begin a search. Click Select if more than one match is found. Click Details for
additional information on that waypoint.

Unit Converter Tool

Click Tools > Unit Converter. Enter a number, and select the unit of measurement to convert
from/to.

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

109

Index

Index
A
Add Route
Point and Click 73
Add to RoutePack Column 77
Airport
Centering On 62
Showing Alternate Airports 78
Airport Chart
Displaying 53
Displaying Changes 55
Navigating 56
Viewing 53
Airport Chart Icons 54
Airport Filter
Applying to Enroute Chart 68
Airport Filter File
Loading 67
Airport List
Add To RoutePack Column 77
Distance From Column 62
Filtering Airports 63
Keyboard Shortcuts 63
Moving a Column 63
Resizing a Column 63
Searching 61
Airport List Window 60
Airway Manual
Viewing 41
Airway Routing
Creating a Route 74
Alternate Airports
Showing 78
Alternate Route
Adding to Route 76
Adding to RoutePack 76
Deleting 76
Anchor Mode 105
Anchor Point
Centering On 106
Moving 106
Application Interface Screen 15
Customizing 50

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Approaches Within
Showing 78
Attach a Window 15

B
Bottlang Airfield Manual
Different Languages 46
Viewing 41

C
Center On
Anchor Point 106
Change Notices
Printing 40
Change Notices Tab 39
Chart Compare Toolbar 33
Chart Icons 54
Chart Menu 20
Chart Tab 34
Chart Toolbar 27
Chart Type
Setting for Other Airports 79
Chart Type Selection
Resetting Default 79
Charts
Displaying 53
Displaying Changes 55
Manually Selecting 80
Navigating 56
Printing on Jeppesen Paper 101
Printing Other Airports 77
Viewing a List 53
Zoom to Preset 56
Clock 16
CONOPS VFR 51
Copying
RoutePack 72
Current Chart Type Preferences 79
Cutting
RoutePack 72

2015 Jeppesen, All Rights Reserved.

110

Index

D
Deactivating Software 12
Default View 36
Delete
Alternate Route 76
Deleting
Route 76
RoutePack 72
Departure Chart Preferences 79
Destination Chart Preferences 79
Detach a Window 15
Distance From
Filtering Airports 67
Drag Pan Mode 35
Drag Zoom 35
Dragging and Dropping
Route 76

E
Echo Tops 96
Edit Menu 19
Effective Date
Terminal Chart 55
Enroute Chart
Filtering Airports 67
Navigating 34
Printing 39
Ruler 35
Selecting Objects 36
Showing Route 76
Enroute Chart Printing Options 39
Enroute Chart Themes 51

F
Favorite Airports 68
Creating a List 68
File Menu 17
Filter
Applying to Existing RoutePack 79
Terminal Chart 78
Filter Settings
Geographic Area Tab 65
Filtering Airports
Distance From 67

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Using Enroute Chart 67

Flight Planning 81
Appending Waypoints 82
Plain Language Routing 85
Formations button 30

G
Geographic Area Filter 67
Geographic Area Tab 65
Ground IFR 51
Ground VFR 51
GUI
Customizing 50
Overview 15

H
Help Menu 24

I
Icing 96
IFR 51
IFR and VFR
Distinguishing Between 63
Installation
Removing Software 13

J
Jeppesen
Printer Driver 100
Jeppesen Paper
Printing Charts 101

K
Keyboard Shortcuts
Airport List 63

L
Latitude Display
Changing 16
Lightning 95

2015 Jeppesen, All Rights Reserved.

111

Index

Live Weather 87
Live Weather Options 88
Longitude Display
Changing 16
Looping Weather 93

M
Manually Selecting Charts 80
Measurement Only Measurements 105
Measurement Units Setup 15
Measurements
Making 105
Making Measurement Only 105
Making Point to Point 105
Menu
Chart 20
Edit 19
File 17
Help 24
Notebook 23
Right-Click 24
Tools 22
View 20
Weather 22
Modifying
Route 75
Modifying a Route
Rubber Band Method 75
Moving Panes 15

N
Navigating
Terminal Chart View 56
NEXRAD Winter Mosaic 96
Next and Previous View 35
Notebook Menu 23
Notebook Tab 48

O
Other Airports
Adding 77
Other Airports Folder 77
Printing Charts 77
Other Charts

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Setting Chart Types 79

P
Pane
Attaching 15
Detaching 15
Panning 34
Plain Language
RoutePack 73
Point and Click
RoutePack 72
Point to Point Measurements 105
Preferences Toolbar 30
Previous and Next View 35
Printer Driver
Jeppesen Format 100
Printer Guidelines 100
Printing
Enroute Chart 39
Jeppesen Paper 101
Notebook 49
Other Airports 77
Printer Guidelines 100
Terminal Chart Revision Letter 49
Trip Kit 102
Vector Charts 103
Prior Permission Required (PPR) 65

R
Radar Echo Tops 96
Range Bearing
Anchor Mode 105
Changing Color Of 106
Measurement Only 105
Point to Point 105
Properties 107
Removing Software 13
Renaming
RoutePack 71
Restoring Panes 15
Right-Click Menus 24
Route 71
Alternate Route 76
Create Airway Routing 74
Definition 71

2015 Jeppesen, All Rights Reserved.

112

Index

Deleting 76
Dragging and Dropping 76
Modifying 75
Point and Click 73
Showing on Enroute Chart 76
RoutePack
Alternate Route 76
Basics 71
Closing 71
Cutting and Copying 72
Deleting 72
Importing 76
Opening 71
Plain Language 73
Point and Click 72
Renaming 71
Terminal Chart Filter 78
Versus Route 71
RoutePack Files
Registering 71
Rubber Band Method
Modifying a Route 75
Ruler 35

S
Screen Proportions
Changing 15
scroll 56
Scrolling 56
Searching for an Airport 61
Selecting Objects 36
Setup Measurement Units 15
Show Approaches Within 78
Show Distance From Here 78
Software
Removing 13
Standard Toolbar 25, 26
Strip Charts 102

T
Tabs
Change Notices 39
Chart 34
Geographic Area 65
Notebook 48

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

Showing and Hiding 15

Terminal Charts 49
Text 41
Terminal Chart
Changes 55
Displaying 53
Effective Date 55
Icons 54
Manually Selecting 80
Navigating 56
Printing on Jeppesen Paper 101
Revision Date 55
Viewing a List 53
Zoom to Preset 56
Zooming 56
Terminal Chart Filter 78
Terminal Chart Revision Letter
Printing 49
Terminal Chart Tab 49
Terminal Charts
Updating 55
Terminal Charts Toolbar 32
Text
Adding 48
Text Tabs 41
Text Viewer Toolbar 44
Thumbnail 37
Tool Tips 16
Toolbar
Arranging 24
Chart 27
Chart Compare 33
Displaying or Hiding 25
Docking and Undocking 25
Moving 25
Preferences 30
Standard 26
Terminal Charts 32
Text Viewer 44
Tools 29
Weather 28
Tools Menu 22
Tools Toolbar 29
Trip Kit
Printing 102
Turbulence 95

2015 Jeppesen, All Rights Reserved.

113

Index

U
Uninstalling Software 13
User-Defined Waypoint
Adding 107
Changing Location 108
Deleting 108
Modifying 107
Showing Airports Near 108
Viewing Properties 107
User-Defined Waypoints
Centering On 108
Changing the Icon 108
Showing Distance From 108

V
Vector Charts
Printing 103
Versus RoutePack 71
VFR and IFR
Distinguishing Between 63
View Menu 20

Weather Products
Echo Tops 96
Icing 96
Lightning 95
NEXRAD 96
Radar Echo Tops 96
Turbulence 95
Winds 95
Weather Toolbar 28
Window Size
Changing 15
Winds 95

Z
Zoom Box 35
Zooming 34
Preset Terminal Chart Section 56
Terminal Chart 56

W
Waypoint
Adding User-Defined 107
Cut and Copy 107
Drag and Drop 107
Waypoints
Adding 107
Centering On 108
Changing Location 108
Changing the Icon 108
Deleting 108
Inserting 75
Modifying 107
Reordering 75
Showing Airports Near 108
Showing Distance From 108
Viewing Properties 107
Weather 87
Live Weather Options 88
Looping 93
Weather Legend 93
Weather Menu 22

Jeppesen JeppView for Windows User Guide

Proprietary and Confidential

2015 Jeppesen, All Rights Reserved.

114