Name:
Charles Ndubuzo
TradeSET Number:
TS261913
My Trade:
Electrician (Special Class)
Specialisation:
Electrician (Special Class)
About TradeSET
TradeSET is a free service provided by Trades Recognition Australia (TRA) to help you
understand how trade occupations operate in Australia and is part of the process for
applicants applying for the:
1. 457 Skills Assessment Program (eligible applicants seeking skills assessments for
temporary migration or to facilitate access to occupational licensing)
2. Offshore Skills Assessment Program (eligible applicants seeking skills assessments for
permanent migration)
3. The Trades Recognition Service (eligible applicants seeking skills assessments for
employment purposes or to facilitate access to occupational licencing); or
4. TradeSET may also be used as a guide for Job Ready Program participants
Your TradeSET report will also show any additional training you may require to work in
Australia.
Skills assessments for the 457 Skills Assessment Program, the Offshore Skills Assessment
Program and the Trades Recognition Service (TRS) are conducted by registered training
organisations (RTOs) approved by TRA. Please read the relevant 457 Skills Assessment
Program Applicant Guidelines, Offshore Skills Assessment Program Applicant Guidelines
or Trades Recognition Service Guidelines for information, including eligibility requirements
and how to locate a TRA-approved RTO.
Your TradeSET report must be given to the TRA-approved RTO conducting your skills
assessment.
To access information about occupational licensing in Australia please visit Pathway to
occupational licensing for overseas-trained tradespeople.
Important Notes:
The TradeSET report is not a formal skills assessment or a qualification. Persons applying
for skilled migration are required to meet all requirements of the Department of Immigration
and Border Protection (DIBP). This includes English language requirements and any other
requirements as directed by DIBP. Further information about migration requirements can be
found at http://www.border.gov.au/.
Page 1 of 11
Name:
Charles Ndubuzo
TradeSET Number:
TS261913
My Trade:
Electrician (Special Class)
Specialisation:
Electrician (Special Class)
Details
Gender:
Date of Birth:
City:
Passport Number:
Country where I live:
Country of passport issue:
Country of Training:
Skills Assessment Program:
Finalisation Date:
Male
02/08/1987
Lagos
AA3329458
Nigeria
Nigeria
Nigeria
457 or Offshore Skills Assessment Program
01/07/2016
This evaluation report provided through TradeSET for Electrician (Special
Class) determines whether you may have the skills required of an Electrician
(General). However, to work in the occupation of Electrician (Special Class),
you will be expected to demonstrate that you have additional skills related to
an area of specialisation that makes up the Certificate IV in Electrotechnology
(Systems Electrician) qualification. Some areas of specialisations within that
qualification are: industrial control (automation), lift systems, hazardous areas,
instrumentation/process control and motor control.
Page 2 of 11
Name:
Charles Ndubuzo
TradeSET Number:
TS261913
My Trade:
Electrician (Special Class)
Specialisation:
Electrician (Special Class)
Skills Report
Mandatory Skills
Skilled
Do electrical work in a professional manner and maintain your skills.
Use Occupational Health and Safety rules, codes and tasks in the workplace.
Create, put together and pull apart utilities industry parts.
Solve problems in d.c. circuits.
Fix and make sure electrotechnology parts and equipment is secured.
Use drawings, diagrams, schedules, standards, codes and rules to do your work
correctly.
Record and use your skills and knowledge to control safely risks at work.
Solve problems in single and three phase low voltage machines.
Solve problems in single and three phase low voltage electrical parts and circuits.
Arrange circuits, control and protection for general electrical work.
Solve problems in low voltage a.c. circuits.
Install low voltage wiring and accessories.
Install parts for low voltage electrical installations.
Check that low voltage general electrical installations are working correctly and
meet rules of safe operation.
Terminate cables, cords and accessories for low voltage circuits.
Select wiring systems and cables for low voltage general electrical installations.
Find and fix faults in low voltage electrical parts and circuits.
Develop and connect electrical control circuits.
Use work methods that will help to keep the environment always in a good state.
Solve problems in electromagnetic devices and other related parts.
Yes
Yes
Yes
Yes
Yes
Yes
Elective Skills
Skilled
Keep documents in order.
Work safely in the construction industry.
Assemble, mount and connect control gear and switchgear.
Find and fix faults in d.c. electrical parts and circuits.
Put in place and look after emergency and safety systems.
Repair faults in basic electronic parts by replacing other parts.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Page 3 of 11
Elective Skills
Skilled
Use drawings, standards and equipment manuals for instrument use.
Solve problems in flow measurement circuits and systems.
Work out the basic operating conditions of air conditioning systems.
Attend to a breakdown in a hazardous pressurisation area.
Wind electrical coils.
Place and connect electrical coils.
Prepare and connect refrigerant tubing and fittings.
Work out the basic operating conditions of vapour compression systems.
Use and make sure a portable gas detection device is safe to use.
Yes
Yes
Yes
Yes
No
No
No
No
No
Page 4 of 11
Name:
Charles Ndubuzo
TradeSET Number:
TS261913
My Trade:
Electrician (Special Class)
Specialisation:
Electrician (Special Class)
Skills Assessment Plan
Australian Qualification
Code:
Name:
UEE30811
Electrotechnology Electrician
My Skills and Evidence
Mandatory Skills
Tasks
Work: Do electrical work in a professional manner
and maintain your skills.
Unit of Competency Code: UEENEEC020B
Unit Title: Participate in electrical work and
competency development activities
- Monitor and respond to a
personal competency development
plan.
- Comply with electrical
industry/enterprise work policies
and procedures
Work: Use Occupational Health and Safety rules,
codes and tasks in the workplace.
Unit of Competency Code: UEENEEE101A
Unit Title: Apply Occupational Health and Safety
regulations, codes and practices in the workplace
- Follow workplace procedures for
hazard identification and risk
control
- Apply safe working practices.
- Prepare to enter a work area
Work: Create, put together and pull apart utilities
industry parts.
Unit of Competency Code: UEENEEE102A
Unit Title: Fabricate, assemble and dismantle utilities
industry components
- Fabricate utilities industry
components.
- Dismantle and assemble utilities
industry apparatus.
- Prepare for dismantling,
assembling and fabrication work.
Work: Solve problems in d.c. circuits.
Unit of Competency Code: UEENEEE104A
Unit Title: Solve problems in d.c. circuits
- Complete work and document
problem solving activities.
- Solve d.c. circuit problems.
- Prepare to work on d.c. electrical
circuits.
Page 5 of 11
Mandatory Skills
Tasks
Work: Fix and make sure electrotechnology parts
and equipment is secured.
Unit of Competency Code: UEENEEE105A
Unit Title: Fix and secure electrotechnology
equipment
- Install fixing and support devices.
- Complete fixing and support work.
- Prepare to fix and secure
equipment.
Work: Use drawings, diagrams, schedules,
standards, codes and rules to do your work correctly.
Unit of Competency Code: UEENEEE107A
Unit Title: Use drawings, diagrams, schedules,
standards, codes and specifications
- Prepare to use compliance
standards, codes and
specifications.
- Use drawings, diagrams,
schedules and manuals to convey
information and ideas.
- Use drawings, diagrams,
schedules and manuals to obtain
job information.
- Prepare to use drawings,
diagrams, schedules and manuals.
Work: Record and use your skills and knowledge to
control safely risks at work.
Unit of Competency Code: UEENEEE137A
Unit Title: Document and apply measures to control
OHS risks associated with electrotechnology work
- Monitor and review the control
measures.
- Assign levels of risk and develop
and document control measures.
- Identify and document hazards
and risks.
Work: Solve problems in single and three phase low
voltage machines.
Unit of Competency Code: UEENEEG006A
Unit Title: Solve problems in single and three phase
low voltage machines
- Complete work and document
problem solving activities.
- Solve single and three phase low
voltage machine problems.
- Prepare to solve single and three
phase low voltage machines
problems.
Work: Solve problems in single and three phase low
voltage electrical parts and circuits.
Unit of Competency Code: UEENEEG033A
Unit Title: Solve problems in single and three phase
low voltage electrical apparatus and circuits
- Complete work and document
problem solving activities.
- Solve single and three phase low
voltage electrical apparatus/circuit
problems.
- Prepare to solve single and three
phase low voltage electrical
apparatus/ circuit problems.
Work: Arrange circuits, control and protection for
general electrical work.
Unit of Competency Code: UEENEEG063A
Unit Title: Arrange circuits, control and protection for
general electrical installations
- Document electrical installation
circuits, control and protection
arrangements
- Arrange electrical installations
circuits, control and protection
- Prepare to arrange electrical
installations circuits, control and
protection
Page 6 of 11
Mandatory Skills
Tasks
Work: Solve problems in low voltage a.c. circuits.
Unit of Competency Code: UEENEEG102A
Unit Title: Solve problems in low voltage a.c. circuits
- Complete work and document
problem solving activities.
- Solve low voltage a.c. circuit
problems.
- Prepare to solve low voltage a.c.
circuit problems.
Work: Install low voltage wiring and accessories.
Unit of Competency Code: UEENEEG103A
Unit Title: Install low voltage wiring and accessories
- Completion and report installation
activities.
- Install wiring and accessories.
- Prepare to install wiring and
accessories.
Work: Install parts for low voltage electrical
installations.
Unit of Competency Code: UEENEEG104A
Unit Title: Install appliances, switchgear and
associated accessories for low voltage electrical
installations
- Completion and report installation
activities.
- Install appliances, switchgear
and associated accessories.
- Prepare to install appliances,
switchgear and associated
accessories.
Work: Check that low voltage general electrical
installations are working correctly and meet rules of
safe operation.
Unit of Competency Code: UEENEEG105A
Unit Title: Verify compliance and functionality of low
voltage general electrical installations
- Report inspection and test
findings.
- Visually inspect and conduct
safety testing on the installation.
- Prepare to inspect and test an
electrical installation.
Work: Terminate cables, cords and accessories for
low voltage circuits.
Unit of Competency Code: UEENEEG106A
Unit Title: Terminate cables, cords and accessories
for low voltage circuits
- Test terminated cables and cords
- Terminate cables, cords and
conductors
- Prepare to terminate cables,
cords and conductors
Work: Select wiring systems and cables for low
voltage general electrical installations.
Unit of Competency Code: UEENEEG107A
Unit Title: Select wiring systems and cables for low
voltage general electrical installations
- Document electrical installation.
- Select wiring systems and cables
for general electrical installations
- Prepare to select wiring systems
and cables for general electrical
installations
Work: Find and fix faults in low voltage electrical
parts and circuits.
Unit of Competency Code: UEENEEG108A
Unit Title: Trouble-shoot and repair faults in low
voltage electrical apparatus and circuits
- Completion and report troubleshoot and repair activities.
- Trouble-shoot and repair faults.
- Prepare to trouble-shoot and
rectify faults.
Page 7 of 11
Mandatory Skills
Tasks
Work: Develop and connect electrical control circuits.
Unit of Competency Code: UEENEEG109A
Unit Title: Develop and connect electrical control
circuits
- Completion and document circuit
development activities.
- Connect and test electrical
control circuits.
- Develop and prepare to connect
electrical control circuits.
Work: Use work methods that will help to keep the
environment always in a good state.
Unit of Competency Code: UEENEEK142A
Unit Title: Apply environmentally and sustainable
procedures in the energy sector
- Plan and prepare to apply
sustainable work practice
- Apply sustainable work practice
- Complete the application of
sustainable work practice
Evidence I can provide
- Other Documents
- Photograph / Video
- Other
I can provide photographs of me while at work on various circuit systems.
I can also provide calculation sheets, schematic diagrams as well as drawings developed
by me for installation and maintenance projects.
Elective Trade Skills
Tasks
Work: Keep documents in order.
Unit of Competency Code: UEENEEC001B
Unit Title: Maintain documentation
- Maintain documentation.
- Prepare to maintain
documentation
Work: Work safely in the construction industry.
Unit of Competency Code: CPCCOHS1001A
Unit Title: Work safely in the construction industry
- Identify OHS incident response
procedures.
- Identify construction hazards and
control measures.
- Identify OHS communication and
reporting processes.
- Identify OHS legislative
requirements.
- Identify OHS legislative
requirements.
- Identify construction hazards and
control measures.
- Identify OHS communication and
reporting processes.
- Identify OHS incident response
procedures.
Page 8 of 11
Elective Trade Skills
Tasks
Work: Assemble, mount and connect control gear
and switchgear.
Unit of Competency Code: UEENEEA110A
Unit Title: Assemble, mount and connect control
gear and switchgear
- Check quality of assembled
controlgear and switchgear.
- Assemble, mount and connect
controlgear and switchgear
- Prepare to assemble, mount and
connect controlgear and switchgear
Work: Find and fix faults in d.c. electrical parts and
circuits.
Unit of Competency Code: UEENEEG110A
Unit Title: Find and repair faults in LV d.c. electrical
apparatus and circuits
- Completion and report fault
finding and repair activities.
- Find and repair faults.
- Prepare to find and rectify faults.
Work: Put in place and look after emergency and
safety systems.
Unit of Competency Code: UEENEEG113A
Unit Title: Install and maintain emergency safety
systems
- Completion and report installation
and maintenance activities.
- Install and maintain emergency
safety systems
- Prepare to install and maintain
emergency safety systems
Work: Repair faults in basic electronic parts by
replacing other parts.
Unit of Competency Code: UEENEEH102A
Unit Title: Repairs basic electronic apparatus faults
by replacement of components
- Prepare to repair electronic
apparatus.
- Repair electronic apparatus.
- Complete and report repair work
activities.
Work: Use drawings, standards and equipment
manuals for instrument use.
Unit of Competency Code: UEENEEI101A
Unit Title: Use instrumentation drawings,
specification, standards and equipment manuals
- Prepare to use instrumentation
drawings, specification, standards
and equipment manuals.
- Use instrumentation drawings,
specification, standards and
equipment manuals
- Convey instrumentation
information and ideas using
drawings and diagrams.
Work: Solve problems in flow measurement circuits
and systems.
Unit of Competency Code: UEENEEI104A
Unit Title: Solve problems in flow measurement
components and systems
- Prepare to work on flow
measurement components and
systems
- Solve flow measurement
problems
- Complete work and document
work activities
Work: Work out the basic operating conditions of air
conditioning systems.
Unit of Competency Code: UEENEEJ104A
Unit Title: Establish the basic operating conditions of
air conditioning systems
- Prepare to determine the basic
operating conditions of air
conditioning systems
- Determine the basic operating
conditions of air conditioning
systems
- Complete work and report
Page 9 of 11
Elective Trade Skills
Tasks
Work: Attend to a breakdown in a hazardous
pressurisation area.
Unit of Competency Code: UEENEEM022A
Unit Title: Attend to breakdowns in hazardous areas pressurisation
- Prepare to attend breakdown.
- Evaluate extent of work.
- Arrange repair work.
- Confirm completion of work.
Evidence I can provide
- Other Documents
- Other
I can provide photographic evidence of me while working on motors and pumps.
Skills and Evidence I may need
Mandatory Skills
Tasks
Work: Solve problems in electromagnetic devices
and other related parts.
Unit of Competency Code: UEENEEG101A
Unit Title: Solve problems in electromagnetic devices
and related circuits
- Complete work and document
problem solving activities.
- Solve electromagnetic
devices/circuit problems.
- Prepare to work on
electromagnetic devices and
circuits.
Elective Trade Skills
Tasks
Work: Wind electrical coils.
Unit of Competency Code: UEENEEG150A
Unit Title: Wind electrical coils
- Prepare to wind coils.
- Wind coils.
- Complete work report.
Work: Place and connect electrical coils.
Unit of Competency Code: UEENEEG151A
Unit Title: Place and connect electrical coils
- Prepare to place and connect
coils.
- Place and connect coils.
- Complete work report.
Work: Prepare and connect refrigerant tubing and
fittings.
Unit of Competency Code: UEENEEJ102A
Unit Title: Prepare and connect refrigerant tubing
and fittings
- Prepare to fabricate tubing and
attach fittings for refrigeration
and/or air conditioning systems
- Fabricate tubing and attach
fittings for refrigeration and/or air
conditioning systems
- Complete work and report
Page 10 of 11
Elective Trade Skills
Tasks
Work: Work out the basic operating conditions of
vapour compression systems.
Unit of Competency Code: UEENEEJ103A
Unit Title: Establish the basic operating conditions of
vapour compression systems
- Prepare to determine the basic
operating conditions of vapour
compression systems
- Determine the basic operating
conditions of vapour compression
systems
- Complete work and report
Work: Use and make sure a portable gas detection
device is safe to use.
Unit of Competency Code: UEENEEM076A
Unit Title: Use and maintain the integrity of a
portable gas detection device
- Prepare to use portable gas
detection device.
- Establish safety of the area with
regards to the presence of gases
or vapours.
- Monitor gas detection devices for
the presence of gases/vapours.
- Follow procedures to maintain
gas detection devices.
Page 11 of 11
