Scribd
Upload
52 views1 page

FIBRANgeo SI-080 Technical Data Sheet

FIBRANgeo SI-080 is a natural fibrous material made from minerals like basalt, limestone, dolomite, and bauxite. It has a trapezoidal shape and density of 80 kg/m3. It has a thermal conductivity of 0.040 W/mK and diffusion resistance factor of 1. The material is chemically inert and does not allow growth of parasites. It is packaged in pallets of 600 pieces and should be stored indoors or protected from weather if outdoors. Proper handling and safety precautions should be followed during use, as the material is not considered hazardous waste.

Uploaded by

Andonie Alina Cristina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views1 page

FIBRANgeo SI-080 Technical Data Sheet

FIBRANgeo SI-080 is a natural fibrous material made from minerals like basalt, limestone, dolomite, and bauxite. It has a trapezoidal shape and density of 80 kg/m3. It has a thermal conductivity of 0.040 W/mK and diffusion resistance factor of 1. The material is chemically inert and does not allow growth of parasites. It is packaged in pallets of 600 pieces and should be stored indoors or protected from weather if outdoors. Proper handling and safety precautions should be followed during use, as the material is not considered hazardous waste.

Uploaded by

Andonie Alina Cristina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SI-080

TECHNICAL DATA SHEET


Description
FIBRANgeo SI-080 is a natural fibrous material produced by minerals like Basalt, Limestone, Dolomite, and Bauxite. FIBRANgeo SI080 has the shape of a trapezoid, in order to fill the trapezoidal parts of a metal profile. FIBRANgeo SI-080 are chemical inert, their
attributes are maintained constant in time and do not allow the growth of parasites.

Dimensions

Technical Characteristics
Properties

Unit

Value
3

Density ()

Kg / m

80

Thermal conductivity

W/mK

0.040

Diffusion resistance factor ()

DIN / EN

DIN 52615

Packaging
Pallet of 600 pieces

Instructions for use


HANDLING AND STORAGE
FIBRANgeo B products should be stored indoors. If stored outdoors, they must be protected from impregnation. Pallets shrink-wrapped
weather tightly in PE film may be stored outside. Separate packages should be placed on a flat pallet, not in direct contact with the
ground. If part of the product gets wet, it must be dried before installation. Stonewool dries quickly and its insulating properties remain
unchanged after drying. FIBRANgeo B products are chemically inert and do not allow the growth of micro-organisms, insects or
rodents. Handling, loading and unloading of the products should be carried out with care, to avoid damage both of the packaging and
the boards edges.
APPLICATION AND PERSONAL PROTECTION
For the selection and application of FIBRANgeo B products all design requirements should be taken into consideration. FIBRANgeo B
products should be protected from impregnation, prior to and during application. The packaging film should be removed with care just
before installation. Working areas should be kept clean. Unnecessary or extensive contact of the skin and eyes with product off-cuts,
fibres and dust should be avoided, and protective wear should be used (gloves, goggles, hats). Sufficient ventilation of the working
areas should be ensured, whilst power cutting tools should always be provided with a mechanical system of dust intake. Stone wool
products are not considered hazardous waste. Waste disposal should be carried out according to State and Local regulations.

FIBRAN reserves the right to alter or amend product specifications without notice. The information included in this publication is correct
to the best of our knowledge at the time of printing. Whilst FIBRAN will endeavour to ensure publications are up to date, it is the users
responsibility to check with the company the validity of the information prior to materials use. .
DATE.:01/10/2011 VERS. 3

Central Office

6 Km Thessaloniki - Oreokastro
P.O. BOX 40306, ZIP CODE 560 10
Tel. +30 2310 682 425
Fax. +30 2310 683 13

Web site:www.fibran.gr
e-mail: [email protected]

You might also like