Front Load Washer HMS1000TVE

MODEL HMS1000TVE
FRONT LOADING WASHING MACHINE

Service Manual

Features
300mm diameter porthole, door may be
open at a 180 degrees.
Multi-gear speed controller
Unique gasket design featuring no residual
water hidden inside
Selecting washing temperature according to
the type of fabrics
Delay time adjustive
Washing Programs-11

Haier Group
MANUAL CODE No.1
 Front Load Washer HMS1000TVE

1Contents----------------------------------------------------------------------------------------1

2Product code illumination and series introduction-----------------------------------2

3Features ---------------------------------------------------------------------------------------3

4Specification ----------------------------------------------------------------------------------4

5Safety caution --------------------------------------------------------------------------------6

6Installation ------------------------------------------------------------------------------------9

7Net dimention -------------------------------------------------------------------------------11

8Names of the parts-------------------------------------------------------------------------12

9Function --------------------------------------------------------------------------------------13

10Functions schedule----------------------------------------------------------------------15

11Trouble shooting--------------------------------------------------------------------------16

12Wiring circuit ------------------------------------------------------------------------------22

13Exploded view and list of parts-------------------------------------------------------23

1
 Front Load Washer HMS1000TVE
Model code rule description
Model identification
HMS 1000 T V E
A B C D E
ASerial code
BMax spin speed
CTemprature adjustive
DSpin speed adjustive
EComputer control

Examples
HMS1000TVE
It represents HK series appearancewith big window180opening window800rpm spin
[Link] speed is adjustive from 0 to 1000rpmtemprature is also adjustive. its controlled
by computer.

2
 Front Load Washer HMS1000TVE

300mm diameter porthole, door may be open at a 180 degrees.

Facilitate view of wash process, facilitate unloading and easy to use with large port.

Multi-gear speed controller

According to different costumingyou can slect corresponding spin speedfrom 0 to 1000 rpm.

Unique gasket design featuring no residual water hidden inside.

By the unique gasketwashing machine can left no residual water hidden between outer drum and
board.

Delay time adjustive.

According to different costumingyou can slect delay timefrom 0.5h to 24h.

3
 Front Load Washer HMS1000TVE

Proposal 2004 New Sensor

Front loaders washing machines HMS1000TVE
Brand position center upper frame of door / chromed sticker
Model number serigraphy right top corner control panel
On white: silver / On silver : black or dark grey
1. Product identification
Description of appliance Washing machine
Type of appliance (FS = standing, BI = built-in) FS
Supplier own brand Haier
Supplier bar code EAN TBC
Mares computer code
Commercial Brand / Model
Commercial bar code EAN
2. Key-Features
Energy efficiency class A
Washing performance class C
Spin efficiency class C
Programs n 11
Capacity Kg Max. 5
Spin speed (max. / optional) rpm 1000-0
Noise level dB(A) 72
Energy consumption per wash circle * kWh 0.95
Water consumption* l <65
Residual dampness (spin result) % 56%
Spin speed selector switch (steps) rpm 1000/800/600/400/0
Spin speed variator (stepless) rpm
Adjustable thermostat (water temp. adjust from -
C 80 - 0
to)
Drum capacity dry laundry / water kg / l 6 / 49
Auto water level adjust (depending on volume of filled in laundry) AWL
Washing time (max.) min 124(TBC)
Washing temperatures (program-controlled) C 40 / 60 / 90
Certification's (CE / ISO 9001 / ISO 9002) CE / ISO 9001
Approvals (VDE/GS / TV/GS / IMQ) TV/GS (Rhl.)
* EN 60456 (60C cycle, full load without pre-wash) =

COLD
3. Basics data
Unit dimensions (H x W x D) cm 86 x 48.5 x 59.5
Net weight kg 63
Voltage/frequency V/Hz 220-230V~50Hz
Input power / main fuse (intensity) W/A 1800/10
Work top / removable /
Control M = electromechanical, E = electronic,
F
F = fuzzy
Drum S = stainless steel / Z = zinc coated S
Tub P = Polyprop./ S = stainless steel P
Door:
aesthetic (R = round, Y = big eye, Q =
R
square)
Diameter cm 30
Outer door frame S= stainless steel / M
P
= metal / P = plastic
Inner door G= glass / P=
G
plastic
Detergent compartments n 4
Removable compartment for liquid detergent -

 Front Load Washer HMS1000TVE

Delay timer (from - to) h 0.5-24

Self cleaning suds pump
Water inlet hose cold water / hot water
Water drain hose / -support /
Adjustable feet n 4
4. Safety systems
Auto door lock ADL
Motor overheating protection MOP
No heating without water NHW
Auto water cool-down (before drain 90C boiled water) AWC
Water return protection WRP
Acqua Stop kit -
Child protection
5. Programs
1) Strong action /cotton cycles n
2) Normal action / synthetics n
3) Delicate action / wooll cycles n
Pre-wash / wash
Quick wash / super quick wash
Rinse / soften
Delicate / hand wash
Wool / cashmere
Soak / spin /
Drain
Easy ironing
Optional function keys (additional program settings)
ON/OFF button
Half load -
Fussy -
Spin exclusion -
Spin reduction rpm
High water level -
No Soak -
Rinse stop -
Delicate -
Cold wash
Delay Timer
Extre Rinse
Load Select
Easy Ironning
Temperature reduction
6kg wash
Prewash

 Front Load Washer HMS1000TVE

Matters Needing Attention

.A separate earthed socket is required for the 2. Hold the plug and not the electric cable
power supply. The washing machine must be when unplugging the washing machine.
positioned so that the plug is accessible.

[Link] in the power circuit should be rated for 15A. 4. Do not touch or use the washing machine bare-
footed or when the hands or feet are wet.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.

[Link] not use flammable detergent or dry clean 6. The door of the washing machine will become hot
ing agent; do not use flammable spray in during the heating process. Avoid contact with the
close vicinity to the washing machine; do not door during the heating process. For safety, keep
remove or insert the plug in the presence of children away from the washing machine.
flammable gas.

6
 Front Load Washer HMS1000TVE

Matters Needing Attention

.The washing machine should not be install- [Link] carpet must not obstruct the ventilation
ed outdoors or in a damp place. In the openings in the base of the washing machine.
event of water leakage or splashes allow
the machine to dry naturally.

[Link] away from heat sources and direct sun- [Link] installation, ensure that the electric
light to prevent plastic and rubber components cable is not trapped by the washing machine
from aging. and avoid damage to the electric cable.

During Use
1. Before use, check the joints of the filling hose, the Keep the door slightly open when the washing
tap and the drainage hose for possible problems machine is not in use to prevent formation of
odors; do not cover the washing machine with
from water pressure fluctuations. If joints are loose plastic cover so that inside dampness cannot
be kept in.
or there is leakage, turn off the tap and repair. Do
not use the washing machine until the hoses are
properly fixed.

7
 Front Load Washer HMS1000TVE

Matters Needing Attention

3. Do not place heavy, heating source or wet 4. Do not hot wash foam rubber or sponge-like
materials.
articles on the top of the washing machine.

5. Before washing, do up zippers, buttons and not open the detergent distribution drawer
6. Do
during the wash cycle..
clothes straps and put small articles, such as
socks, laces or bras, into a washing bag or a
pillow.

Steel wires in bras will pop

out during washing; never
wash bras containing steel
wires.

7. The door is fitted with a self-lock device and will not open until [Link] each wash program, turn off the tap to
prevent leakage; and unplug the washing
2~3 minutes after the washing machine stops. Do not force machine and wipe clean the lower part of
the porthole.
the door open. Do not open the door if water level can reach
the porthole.

8
 Front Load Washer HMS1000TVE

Installation





Fig. 1

Check attachments and materials with reference to the following

Dismantle the packing bolts as shown in Fig. 2.

The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Beforeuse:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)

Fig.

Adjusting the washing machine

There are adjustable feet under the bottom of the washing machine.
Before use, the washing machine should be adjusted, as shown in
Fig. 3, so that it is level.

Fig

9
 Front Load Washer HMS700TVE

Installation
Joining the Inlet Hose to the Washing Machine

1. Connect the nut on the inlet hose to the connector on the water valve.

Connect of water inlet valve

The height of the drainage outlet must be 80-100cm. To prevent the drainage hose from dropping off,
fix it to the drainage hose clip at the back of the washing machine.

Use the drainage holder to keep the end of the drainage hose retained and to prevent the outflow
of water. It is recommended that drainage hose extensions not be used; if an extension is needed,
please consult a serviceman. The additional hose should be no more than 250cm (overextended
hoses could lead to siphonage). Note: The drainage hose should not be submerged in water and
should be securely fixed and [Link] appliance is to be connected to the waster mains using
new hose-sets and that old hose-sets should not be reused.

Connecting to the Power Supply

Before connecting to the power supply, check:

The socket is adequate for the maximum power of the washing machine (For safety, fuses in the power circuit should be rated
for no less than 15A).
The voltage should meet the requirement.
The power outlet should be capable of accepting the washing machine plug. The washing machine must be earthed before
use.
Supplementary earth cable should not be necessary if the socket is connected to the earth
Supplementary earth cable shoulde be installed on the upper back of the washing machine andconnected to an earth if the
power supply socket has no earth connection

10
 Front Load Washer HMS700TVE

595 485

860

height: 860mm / width: 595mm / depth: 485mm

11
 Front Load Washer HMS1000TVE

Detergent dispenser Top

Button Progtam selector

Door
handle

Porthole Bottom plaque

Power supply cable

Drain hose clip

Earth terminal

Back plate screw(3)

Drain hose
Back plate

12
 Front Load Washer HMS1000TVE

Control Panel

HMS1000TVE

Pre-wash Cotton Synthetic Wool Cashmere Silk Quick Wash Rinse Spin Drain

Delay Temperature Spin Start/Pause Power

Wash programming knob

By turning the knob clockwise/counterclockwise, the required program can be
selected. There are 11 programs available. After a program is selected, the cor-
responding light will go on. (Refer to Guide to Operational Program Selection).

Power Switch
Press this button to switch on the washing machine. Press it again to switch it off.

Start / Pause Button

When the washing machine is connected to the power socket and a program is
selected, washing operation will start. Lightly touch this button during a wash
cycle, operation will stop and the digits on the screen start blinking. Touch it
again to resume operation. To cancel a wash program during a wash cycle,
touch this button, when the digits on the screen start blinking, press the Power
switch, the program will be cancelled.

D: Spinning Speed Setting Button

Touch this button lightly to select the desired speed. When a speed is set, it will
be displayed on the screen.
Note: Different water temperatures and spinning speeds can be set for different
laundries. Refer to the operation instructions on pages 11 and 14. Wash using the
default settings if there is no special requirement.

E: Washing temperature button

Touch this button lightly, the washing temperature will be displayed on the
screen. Select a temperature according to the type of laundry.

13
 Front Load Washer HMS1000TVE

F: Delay Button
Touch this button lightly, the washing machine will start operation after a period of time
and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this
button increases a half hour. After the button is set, press the Start/Pause button to start
countdown of the set time (the time is displayed on the screen until the program ends).

E+F Key Combination

Press these two keys simultaneously, the sign "LOCK" and the remaining washing time
are displayed on the LED alternately. Now all the function keys except the Power switch
can be locked. Press the key combination again to cancel this function.

G: Detergent distribution drawer

Open the drawer, three compartments can be seen:

Compartment 1: Pre-wash detergent

Compartment 2: Normal - Quick wash detergent
Compartment 3: Softener, conditioning agent,
perfume, etc.

H: DisplayPress
Such information as remaining wash time, temperature and speed setting and error
messages will be shown.

Note: After power is switched on, the display will go on and the remaining wash time
decreases. As the water pressure and temperature may differ, the remaining time may
be adjusted accordingly. When the laundry is not balanced during spinning, the time
may be automatically prolonged. These are normal phenomena.

14
 Front Load Washer HMS1000TVE

Guide to Operational Program Selection

Default Setting Ironing-free Detergent Compartment
Recommended
Program Temperature (Working in Delay
Laundry Temperature Speed Total Time Washing Cycle)

Pre-wash Heavy-soil laundry Cold

Yes Yes

Cold Yes
Cotton Cotton fabrics Yes

Fast-color synth- Cold

Synthetic Yes Yes
etic

Wool Woolen fabrics Cold No

Yes

Cashmere Cashmere fabrics Cold No Yes

Silk Silk fabrics Cold Yes Yes

Medium-soil Cold No
Quick Yes
laundry

Medium-soil
Cold
Wash No Yes
laundry

Medium-soil Yes
Rinse Yes
laundry

Spin Yes Yes

Drain No Yes

Note: indicates that softener can be added if needed; indicates that detergent
must be added; X indicates that detergent must not be added. LED display "--"
indicates cold water; "0" indicates no spinning.
The wash temperature refers to the max temperature. The required time differs
according to different laundries, temperatures and functions. The total time is for
reference only (it may vary slightly for different water temperatures).

15
 Front Load Washer HMS1000TVE

1. Control panel lock function: To prevent children from accidentally

starting the machine, the control panel can be locked by pressing the
"Temp" and "Delay" buttons at the same time. After the panel is locked,
the sign "LOCK" and the wash time are displayed alternately and all the
keys are inactivated. Press the two buttons again to cancel.

2. Power-off memory function: This machine has a power-off memory

function. In case of abrupt power failure or the power must be cut off
during a program cycle, the present settings will be saved, and operation
will resume when the power is switched on again.

3. Display messages:

Cause: Door not properly shut.

Correction: Shut the door properly.
Cause: Drainage error, water not emptied within 4 minutes.
Correction: Clean the filter and check the drain hose for blockage.
If error still exists, please contact the maintenance personnel.
Cause: Temperature sensor not properly connected or damaged
Correction: Contact the maintenance personnel.
Cause: Heating coil damage or overload of laundry that leads to
a failure to reach the set temperature within the specified time.
(this message is displayed at the end of a program).
Correction: Reduce load and then start washing again or contact
the maintenance personnel.
Cause: Water level not met in 8 minutes.
Correction: Make sure that tap is turned on, and water pressure is normal.
If problem still exists, please contact the maintenance personnel.
Cause: Motor overheat protection or damage.
Correction: Contact the maintenance personnel.
Cause: Higher water level protection.
Correction: Contact the maintenance personnel.
A program ends.
The remaining time is 1hour 25 minutes.
The machine will start in 19 hours 25 minutes. The time is renewed
every minute. After the program starts, the remaining time will be
displayed.

16
 Front Load Washer HMS1000TVE
I .The appliance does not work.

Possible causes
[Link] socket is not the required one or the connection is loose.
[Link] door is not properly closed or the switch of micro delay is in poor contact.
[Link] plug wire of motor is in poor contact or the motor is broken.
[Link] of PCB

Troubleshooting
[Link] the socket and plug to make sure that they are properly connected.
[Link] whether the micro delay switch is in good contact in on-position. If yes, insert the
terminal firmly to provide a good connection.
[Link] PCB controls the washing machine [Link] case of the failure, check the wiring
or replace the PCB.

II .Filling failur

Possible causes
[Link] switch of water supply is not opened or the water pressure is too low.
[Link] door is not properly closed or the micro delay switch is in poor contact
[Link] water electromagnetic valve is broken.
[Link] plug wire of drainage pump is in poor contact.
[Link] pressure switch is broken.

Troubleshooting
[Link] the following steps.
1).Open the switch of water supply
2).Check whether the filling hose is twisted or blocked.
3).Check whether the water eletromagnetic valve is blocked.
4).Check whether program is properly selected.
5).Check whether the water supply pressure is too low.
[Link] the door catch and the door lock are in good contact. If not, make necessary
adjustment. Check whether the micro delay switch is in good contact in on-position.
[Link] whether the electromagnetic is good in on-position. Fasten it if necessary.
[Link] on the pressure switch and "click, click" can be heard. Otherwise, replace the
pressure switch with a new one.

III .No drainage

Possible causes
[Link] installation
[Link] drainage pump is broken.

Troubleshooting
[Link] the following steps.
1).Check whether the drainage pipe is twisted or blocked. The appropriate height of the
17
 Front Load Washer HMS1000TVE
water drainage outlet should be from 80 to100cm.
2).Check whether the program is properly selected.
3).Connect the power cable to the drainage pump to check whether the operation is normal.
If not, make necessary replacement.

IV .Unusual noise

Possible causes
[Link] packing screws should be disassembled.
[Link] washer is placed too near a wall.
[Link] washer is loaded over the standard capacity (5Kg).
[Link] is foreign object other than fabrics in the washer.
[Link] washer does not stand level.
[Link] or screws are loose.
[Link] belt is loose.

Troubleshooting
[Link] the packing screws.
[Link] the washer away from the wall.
[Link] not load the appliance more than the standard capacity.
[Link] the foreign object.
[Link] the washer until it is level.
[Link] the bolts and screws.
1) .Fastening bolts of vibration damper
2) .Fastening bolts of balances
3) .Screws of water heating pipe
[Link] the tension of belt.

[Link] drum doesn't rotate; the spin speed is too high or too low.

Possible causes
[Link] belt tension is too low or the fastening bolts are loose.
[Link] plug wire of motor is loose or the motor is broken.
[Link] capacitor is broken.
[Link] PCB is brok en or is not properly plugged.

Troubleshooting
[Link] the tension of belt and tighten the screws.
[Link] whether the plug wire of motor is loose or whether the motor works normally. If not,
make necessary replacement.
[Link] whether the capacitor is good with a universal meter. If not, make necessary
replacement.
[Link] the PCB with a new one.

VI .The water level is too high.

18
 Front Load Washer HMS1000TVE

Possible causes
[Link] leakage at pressure system of water supply.
[Link] pressure switch is broken.

Troubleshooting
[Link] whether the pipeline of pressure system is blocked or there is gas leakage. The
pressure system includes:
(1) Gas-collecting valve
(2) Rubber pipe
(3) Pipe [Link] on the pressure switch and "click, click" can be heard. Otherwise, replace
the pressure switch with a new one.

VII .No heating or automatic heating

Possible causes
[Link] is breaken.
[Link] of ambient temperature
[Link] water-heating pipe is broken.

Troubleshooting
[Link] whether the setting of temperature at no heating(Diplay "--").If not, make
necessary replacement.
[Link] the water-heating pipe to see whether the resistance wire is normal. If not,
make necessary replacement.

VIII .Water leakage

Possible causes
[Link] at joints
[Link] front flange of outer cylinder is poorly close.
[Link] is foreign object on the cushion of sight window.

Troubleshooting
[Link] whether the joints are damaged or loose.
1).Filling pipe
2).Hose connecting electromagnetic valve to dispenser
3).Hose connecting dispenser to outer cylinder
4).Cushion of sight window
5).Hose connecting outer cylinder to pump
6).Drainage pump
7).Gas-collecting valve

19
 Front Load Washer HMS1000TVE
8).Dispenser
9)Condenser
10) Hose connecting condenser to hose of outer cylinder
[Link] the U-bolt.
[Link] off the foreign object from the cushion of sight window.

IX .Improper distribution of dispenser

Possible causes
[Link] plug wire of the water eletromagnetic valve is mistaked.
[Link] PCB is broken.
[Link] of assemblage of dispenser.

Troubleshooting
[Link] the plug wire.
[Link] the PCB with a new one.
[Link] the assemblage of dispenser.

[Link] door lock indicator does not light

Possible causes
[Link] door lock indicator is broken.
[Link] wiring of micro delay switch is loose.
[Link] indicator loses.

Troubleshooting
[Link] the broken indicator.
[Link] the stub of micro delay switch.
[Link] the indicator.

[Link] function or malfunction of program controller

Possible causes
[Link] motor of program controller loses or the stub is sealing-off.
[Link] knob of program controller is stuck.
[Link] contact of wiring of program controller.
[Link] contact at inner contacts of program controller (even after the all the plug wires are
tightened.)

Troubleshooting
[Link] the motor of program controller and make spot welding of the stubs (the
operation of program controller and motor can be heard after the appliance is turned on.)
[Link] the position of knob of program controller.
[Link] the stubs of program controller one by one.
20
[Link] the program controller with a new one.
 Front Load Washer HMS1000TVE
[Link] panel display Err message
Troubleshooting
[Link] user manual,finding the cause of Err message.
[Link] the instructions of the user manual,chenk the washing machine .if not ,
replace relating element.

21
 Front Load Washer HMS1000TVE

Wiring Circuit

P
NTC
Heat

Switch

PCB


FA

MR
N
C
L

EVF EVP PS

Motor

PCB-Printed Circuit Board NTC-Temperature Sensor

FA-Interference Suppresser MR-Door Lock
Switch-Power Swittch EVP,EVF-Water Inlet Magnetic Valve
P-Pressure Switch PS-Drainage Pump
Heat-Heating element Motor-Motor

22
 Front Load Washer HMS1000TVE
Exploded view

4
3
7
9
5
6 8

10 13

14
12

11

16
19

17
38

22 18 20
29 21

37
27
25
24
23

28

31 30

26
36
33

35 32

34

23
 Front Load Washer HMS1000TVE

Number Special code Name of part QTY Unit Remark

Top cover
Able clamp
Water electromagnetic
Filling pipeM ain- wash
Filling pipePre-wash
Water storage sink
Water level pressure switch
Pipe clip of gas-collecting valve
Cable assembly
Hose of gas-collecting valve
Doorlock
Power cable
Box of PCB
PCB
Key switch
Control panel
Buttons
Ornamental bar
Knob of program controller
Button
Handle of dispenser
Dispenser
Door glass cover
Outer frame of sight window
Glass of sight window
Inner frame of sight window
Torsion of door catch
Door catch
Axle of door catch
Bolt of flap
Flap of sight window
Lower plaque
clamp
Foot
Foot nut
Back cover
Self-tapping screw
Case

24


Front Load Washer

HMS Series

25
 Front Load Washer HMS1000TVE

No. Special code Name of part QTY Unit Remark

Front tightening ring of cushion of
sight window
Cushion of sight window
Back tightening ring of cushion of
sight window
Front balance
Bracket of front balance
Front flange of outer cylinder
U-lock
Seal ring of front flange
Inner cylinder
Triangle of inner cylinder
Spring
Screw
Upper balance
Outer cylinder
Filling pipe
Heater
Oil seal
Bearing6204
Bearing6205
Liner of belt pulley
Belt pulley
Belt
Screw
Vibration damper
Fastening bolt of motor
Fastening long-bolt of motor
Fastening bushing of motor
motor
Fastening liner of motor
Clip
Hose connecting outer cylinder to
pump
Clip
gas-collecting valve
Clip
Pump
Clip
Bracket of drain pipe
Drain pipe

26
 Front Load Washer HMS1000TVE

Sincere Forever

Haier Group
Tel:86-532-8939999

Web site:[Link]

27
HAIER Front Load Washer HMS1000TVE
HAIER Front Load Washer HMS1000TVE