Scribd
Upload
12K views22 pages

Ericsson Minilink PDF

This document provides instructions for configuring a MINI-LINK TN device including: 1. Configuring basic network elements like the device name, IP address, and default gateway. 2. Configuring OSPF areas and static routes. 3. Configuring radio links and filling parameters from the TND. 4. Upgrading the device baseline and saving the configuration report and load configuration to an FTP server.

Uploaded by

Ndambuki Dickson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12K views22 pages

Ericsson Minilink PDF

This document provides instructions for configuring a MINI-LINK TN device including: 1. Configuring basic network elements like the device name, IP address, and default gateway. 2. Configuring OSPF areas and static routes. 3. Configuring radio links and filling parameters from the TND. 4. Upgrading the device baseline and saving the configuration report and load configuration to an FTP server.

Uploaded by

Ndambuki Dickson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

Login to MINI-LINK TN

Default IP Address
USB

control_user /
view_user

Password: Ericsson
Configure Basic NE
Right click>configure>Basic NE As per TND NE Name, Location, Contact,
IP address, Subnet Mask and Default GW

Current date and Time


Configure OSPF Areas

To View the Static R


Right Click>Configure>DCN>

onfigure>DCN>OSPF Areas
Configure Radio Link (MMU)

Right click MMU2 D>configure>Configure Radio Link

Fill all the parameter as per TND


Upgrade the Baseline

Right click>Tools>Software Upgrade


Select PC>Browse>chose the baseline from list
Apply>Next
Once 100% done upgrade status the activ
Configure Traffic Routing

Right Click>Configure>Traffic Routing


Select Interface 1 and Interface 2 as per design slot
and send
To Save the TN report

Right click>Tools>Report>Save Repo


To Save the Load Configuration

Note: FTP server must be ON/Running

Select Upload to FTP Server and L

Right click>Configure>Load Configuration


View The Inventory and Release

Right click>Tools>Inventory
Ethernet Switch Configuration

Select Aging time and Switch m

Right Click Ethernet Switch>Configure>General


Configure RL-IME

Select RL-IME>Right click>Configure>select the pa


Configure WAN

Connect to Switch Port

Select WAN Interface>Right click>Configure>General


Configure LAN

Assign the switch port

Admin Status Up

Right Click on LAN>Configure>General


Configure VLAN

Right Click on Ethernet Switch>Configure>VLAN


Add the port member

Enter the VLAN ID as per Design and Name


To View The RSL

Right Click on MMU>Radio link alarm and status


To Perform the Loops

Go to Radio Links>Slot>Radio Link Loops

You might also like