97 series accessories
cable clamps, bushing
Cable Clamp MS3057A Type
For jacketed cable or wires protected by tub-
ing. Both clamping halves float for maximum
strain relief. For unjacketed cable or wires, use
corresponding MS3420 bushing. To order
clamp with bushing, add -1 to the 97-number.
Two telescoping bushings are furnished with
shells sizes 24 and larger.
This cable clamp is die-cast zinc alloy and lim-
ited to the following plating variations:
Std - olive drab/green chromate Amphenol Max. O.D. Cable A B C
Shell Size Threads
Part Number Inch mm Inch mm Inch mm Inch mm
(621) - black chromate
(676) - bright nickel 97-3057-1004 10SL, 12S 5/16 7.92 .795 20.19 .842 21.39 5/16 7.92 5/8-24
(624) - green zinc alloy 97-3057-1007 12SL, 14, 14S 7/16 11.10 .850 21.59 .995 25.27 7/16 11.10 3/4-20
(689) - electroless nickel 97-3057-1008 16, 16S 9/16 14.27 .920 23.37 1.120 28.45 9/16 14.27 7/8-20
97-3057-1010 18 5/8 15.88 .920 23.37 1.216 30.89 5/8 15.88 1 -20
Bushing MS3420 97-3057-1012 20, 22 3/4 19.05 .927 23.55 1.403 35.64 3/4 19.05 1-3/16-18
Rubber bushing specifically designed for 97-3057-1016 24, 28 15/16 23.80 1.015 25.78 1.683 42.75 15/16 23.80 1-7/16-18
MS3057A type cable clamp. Can also be used 97-3057-1020 32 1-1/4 31.75 1.095 27.81 2.050 52.07 1-1/4 31.75 1-3/4-18
as a reducing bushing. 97-3057-1024 36 1-3/8 34.93 1.156 29.36 2.245 57.02 1-3/8 34.93 2 -18
Bushing Part Number A B C D E F
MS Amphenol Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm
3420-3 9779-513-3 .130 3.30 .210 5.33 .374 9.50 2.875 73.03 1/32 .79 1/32 .79
3420-4 9779-513-4 .220 5.59 .302 7.67 .500 12.70 2.750 69.85 1/32 .79 1/32 .79
3420-6 9779-513-6 .312 7.92 .427 10.85 .614 15.60 2.625 66.68 1/32 .79 1/16 1.57
3420-8 9779-513-8 .437 11.10 .552 14.02 .739 18.77 2.500 63.50 1/16 1.57 1/16 1.57
3420-10 9779-513-10 .562 14.27 .615 15.62 .889 22.58 2.375 60.33 1/16 1.57 1/16 1.57
3420-12 9779-513-12 .625 15.88 .740 18.80 1.084 27.53 2.250 57.15 1/16 1.57 1/16 1.57
3420-16 9779-513-16 .750 19.05 .927 23.55 1.309 26.39 2.125 53.98 1/16 1.57 1/16 1.57
3420-20 9779-513-20 .937 23.80 1.240 31.50 1.591 40.41 2.000 50.80 1/16 1.57 1/16 1.57
3420-24 9779-513-24 1.250 31.75 1.365 34.67 1.842 46.79 1.875 47.63 1/16 1.57 1/16 1.57
Cable Clamp AN3057 Type
For jacketed cable or wires protected by tubing. Cable or wires
should be centered in jaws of clamp for maximum grip. A vinyl or
rubber bushing or sleeve may be used for centering. One resil-
ient washer and two fiber washers are included with each clamp.
This cable clamp is die-cast zinc alloy and limited to the following
plating variations:
Std - olive drab/green chromate
(621) - black chromate
(676) - bright nickel
(624) - green zinc alloy
(689) - electroless nickel
Fits Fits AN Max O.D. Cable A B E F Weight
AN Number Threads
Shell Size Fitting Size Inch mm Inch mm Inch mm Inch mm Inch mm Lbs. per 100
97-3057-3 8S, 10S 3 1/4 6.35 11/16 17.45 1 25.40 1/4 6.35 1/8 3.18 1/2-28 1.89
97-3057-4 10SL, 12S 4 5/16 7.92 25/32 19.84 1 25.40 5/16 7.92 3/16 4.75 5/8-24 2.12
97-3057-6 12SL, 14, 14S 6 7/16 11.10 15/16 23.80 1-5/64 27.38 7/16 11.10 3/16 4.75 3/4-20 2.94
97-3057-8 16, 16S 8 9/16 14.27 1-1/16 26.97 1-1/8 28.58 9/16 14.27 9/32 7.14 7/8-20 3.44
97-3057-10 18 10 5/8 15.88 1-3/16 30.15 1-1/8 28.58 5/8 15.88 5/16 7.92 1 -20 4.72
97-3057-12 20, 22 12 3/4 19.05 1-3/8 34.93 1-3/16 30.15 3/4 19.05 5/16 7.92 1-3/16-18 6.10
97-3057-16 24, 28 16 15/16 23.80 1-5/8 41.28 1-5/16 33.32 15/16 23.80 3/8 9.53 1-7/16-18 8.71
97-3057-20 32 20 1-1/4 31.75 1-15/16 49.20 1-1/2 38.10 1-1/4 31.75 1/2 12.70 1-3/4-18 14.85
97-3057-24 36 24 1-3/8 34.93 2-3/16 55.55 1-9/16 39.67 1-3/8 34.93 19/32 15.06 2 -18 18.15
97-3057-28 40 28 1-5/8 41.28 2-1/2 63.50 1-9/16 39.67 1-5/8 41.28 21/32 16.66 2-1/4-16 21.50
33
97 series accessories
cable clamps, cont.
Step-Down Clamp 97-3057
Similar to AN3057 clamp, except step-down
feature accommodates smaller cable.
This cable clamp is die-cast zinc alloy and
limited to the following plating variations:
Std - olive drab/green chromate
(621) - black chromate
(676) - bright nickel
Amphenol Fits Fits AN Max O.D. Cable A B E F Weight
Threads
Part Number Shell Size Fitting Size Inch mm Inch mm Inch mm Inch mm Inch mm Lbs. per 100
97-3057-10-6 18 10 1/2 12.70 1-13/16 30.15 1-1/8 28.58 7/16 11.10 3/16 4.75 1 -20 3.94
97-3057-12-6 20, 22 12 1/2 12.70 1-3/8 34.93 1-3/16 30.15 7/16 11.10 3/16 4.75 1-3/16-18 4.40
9767 Water Resistant Cable Clamp
The 9767 assembly includes AN3057 clamp,
a rubber bushing, a washer and the AN3055
adapter. To assure best results, the plug
must be ordered with deviation (417), which
supplies a W washer on the shoulder of the
plug shell.
Max. O.D. Cable Amphenol Connector A B Weight
Threads
Inch mm Part Number Size Inch mm Inch mm Lbs. per 100
9767-12-4 10SL, 12S, 12 25/32 19.84 1-17/32 38.89 5/8-24 3.82
7/32 5.55 9767-14-4 12SL, 14S, 14 29/32 23.01 1-17/32 38.89 3/4-20 3.87
9767-16-4 16S, 16 1-1/16 26.97 1-17/32 38.89 7/8-20 4.00
9767-14-6 12SL, 14S, 14 29/32 23.01 1-19/32 40.46 3/4-20 5.54
11/32 8.73 9767-16-6 16S, 16 1-1/16 26.97 1-19/32 40.46 7/8-20 5.84
9767-18-6 18 1-3/16 30.15 1-19/32 40.46 1 -20 5.94
9767-16-8 16S, 16 1-1/16 26.97 1-19/32 40.46 7/8-20 6.92
7/16 11.12 9767-18-8 18 1-3/16 30.15 1-19/32 40.46 1 -20 7.10
9767-22-8 20, 22 1-3/8 34.93 1-19/32 40.46 1-3/16-18 7.27
9767-18-10 18 1-3/16 30.15 1-19/32 40.46 1 -20 8.79
9/16 14.29 9767-22-10 20, 22 1-3/8 34.93 1-19/32 40.46 1-3/16-18 8.97
9767-28-10 24, 28 1-5/8 41.28 1-17/32 38.89 1-7/16-18 9.12
9767-22-12 20, 22 1-3/8 34.93 1-21/32 42.06 1-3/16-18 12.65
11/16 17.46
9767-28-12 24, 28 1-5/8 41.28 1-21/32 42.06 1-7/16-18 12.86
9767-28-16 24, 28 1-5/8 41.28 1-25/32 45.24 1-7/16-18 14.95
27/32 21.43
9767-36-16 36 2-3/16 55.56 1-31/32 50.00 2 -18 16.36
1-1/32 26.19 9767-32-20 32 1-15/16 49.20 1-31/32 50.00 1-3/4-18 22.27
Cable Clamp for AN fittings Max. Cable O.D. Amphenol Fitting A B Weight
Threads
In selecting a cable clamp for a connection with Inch mm Part Number Size Inch mm Inch mm Lbs. per 100
AN fittings, the 9767 clamp with the adapter 7/32 5.54 9767-4 4 25/32 19.84 1 25.40 5/8-24 2.45
may be used. 11/32 8.71 9767-6 6 29/32 23.01 1-5/64 27.38 3/4-20 3.94
7/16 11.10 9767-8 8 1-1/16 26.97 1-1/8 28.58 7/8-20 4.57
9/16 14.27 9767-10 10 1-3/16 30.15 1-1/8 28.58 1 -20 5.97
11/16 17.45 9767-12 12 1-3/8 34.93 1-3/16 30.15 1-3/16-18 7.85
27/32 21.41 9767-16 16 1-5/8 41.28 1-5/16 33.32 1-7/16-18 9.53
34
