Chassis Key location Steps to enter into the Factory Mode Remarks

UOC 9370 user remote A1) Press key "QV" for 4 seconds and release key 2 ways - A & B
user remote A2) Press and release key "MENU"
To enter into,
user remote B1) Press and release key "MENU" "MENU-M4~M9"
user remote B2) Input the password "6","4","8","3" enter "828"

TB1251 user remote 1) Press and release key "1"

user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "5"
user remote 5) Press and release key "1"
user remote 6) If CH position is not at 51, retry from step1
user remote 7) Press the MENU key to the MENU menu, select
the LIMIT item and press the volume up key to enter
into the LIMIT menu
user remote 8) Press and release the mute key
user remote 9) Input the password "1","2","5","1"

TB1238 user remote 1) Press and release key "1" to unlock password
user remote 2) Press and release key "2" the general secret code
user remote 3) If CH position is not at 12, retry from step1 is 2175
user remote 4) Press and release key "3"
user remote 5) Press and release key "8"
user remote 6) If CH position is not at 38, retry from step1
user remote 7) Press and release the mute key
user remote 8) Input the password "1","2","3","8" Success - "M" displayed

UOC 9381 user remote 1) Press and release key "MENU"

user remote 2) Press and release key "8"
user remote 3) Press and release key "5"
user remote 4) Press and release key "0"
user remote 5) Press and release key "0" Success - "M" displayed

8821 TV front panel 1) Press and hold key "v-"

user remote 2) After volume=0, press key "DISPLAY"
user remote 3) To exit, press and release key "DISPLAY"

3Y11, user remote 1) Press and release key "MENU"

3Y01 user remote 2) Press and release key "MENU"
user remote 2) Press and release key "Q. VIEW"
user remote 2) Press and release key "MUTE"
Chassis Key location Steps to enter into the Factory Mode Remarks
14/21S01 user remote 1) Press and release key "RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times

5P60 user remote 1) Press and release key "CLOCK"

user remote 2) Press and release key "P.M."
user remote 3) Press and release key " "
user remote 4) To exit, press and release key "MENU"

5N11 Factory remote 1) Press and release FACTORY key

Convert the user remote con to the Factory remote For details, see page 18,
user remote 1) Connect IC pin14 & pin17 through a jiggle switch under Service Adj.
(LEAD9370) E2PROM default setting 2004-9-21
MI Item Range Default value MI Item Range Default
50HZ 60HZ M6 OSO 0/1 0
M1 [Link] 0~63 31 31 AGC SPEED 0~2 1
[Link] 0~63 33 33 FFI 0/1 0
[Link] 0~63 37 37 FSL 0/1 0
[Link] 0~63 24 24 FMWS 0/1 0
[Link] 0~63 29 40 HP2 0/1 0
[Link] 0~63 20 9 RPO 0~3 1
[Link] 0~63 8 6
PROGRAM NO. M7 COOL BO OFFSEF 0~32 16
WARM BO OFFSET 0~32 16
M2 AGC 0~63 22 STANDARD BRI 0~63 48
WIDE 0~63 0 STANDARD CON 0~63 48
MAX ZOOM 0~63 50 STANDARD COL 0~63 32
SEARCH SPEED 0~3 1 SHARP BRI 0~63 48
SHIPPING 0 SHARP CON 0~63 63
SHARP COL 0~63 32
M3 BT 0~63 48 SOFT BRI 0~63 32
CT 0~63 48 SOFT CON 0~63 32
RB 0~63 31 SOFT COL 0~63 32
GB 0~63 31 M8 AV MODE 0~6 3
RD 0~63 40 FM GAIN 0~63 63
GD 0~63 40 Y DELAY PAL 0~15 9
BD 0~63 40 Y DELAY NTSC 0~15 9
SB 0~63 30 Y DELAY AV 0~15 9
SC BRIGHTNESS 0~63 55
M4 SUB CONTRAST 0~63 63 CATHODE LEVEL 0~15 1
SUB COLOR 0~63 63 BAND MODE 0/1 1
SUB SHARPNESS 0~63 31 START ON 0/1 1
SUB TINT 0~63 31 RF AMP 0/1 0
HEADPHONE 0/1 0
M5 IF 38.9M SRS 0
6.5M 0/1 0 M9 LOGO OPTION 0/1 5
6.0M 0/1 1 *LOGO ---------- AKIRA
5.5M 0/1 1 ROW POSITION 0~12 6
4.5M 0/1 0 COLUMN POSITION 0~12 2
SIF PRIORITY 5.5M COLOR 0~6 0
AV NOLY 0/1 0 START TIME 6~12 10