Scribd
Upload
261 views2 pages

Monitoring Logsheet

This logsheet is used to record information about emissions monitoring at a facility, including details about the source being tested, its fuel usage and operation, any air pollution control devices in use, and process parameters. It collects identification and contact information for the facility and source, technical specifications of the equipment, operating conditions during sampling, and notes from on-site monitoring personnel and facility representatives. The goal is to document all relevant factors to properly characterize the emissions from the source and determine the applicable standards.

Uploaded by

Dominic Cabalo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
261 views2 pages

Monitoring Logsheet

This logsheet is used to record information about emissions monitoring at a facility, including details about the source being tested, its fuel usage and operation, any air pollution control devices in use, and process parameters. It collects identification and contact information for the facility and source, technical specifications of the equipment, operating conditions during sampling, and notes from on-site monitoring personnel and facility representatives. The goal is to document all relevant factors to properly characterize the emissions from the source and determine the applicable standards.

Uploaded by

Dominic Cabalo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

GEOSPHERE MONITORING LOGSHEET

Facility Information
FACILITY NAME
LOCATION
PCO NAME
TELEPHONE/FAX NUMBER
MAINTENANCE SUPERVISOR/ENGINEER (Supplying Information)
DATE OF SAMPLING
STACK PERSONNEL

Source Determination
SOURCE TESTED (id or Name used by facility)
TOTAL STACK HEIGHT (to the emission point to atm in meters)
SOURCE TYPE (Genset, Boiler, etc.)
BRAND (Made by)
RATED CAPACITY (with units: BHP, MW, MT/hr. etc.)
DATE CONSTRUCT STARTED (on source) month/year
DATE OF ANY MODIFICATION (that increase emissions)
HAS THE SOURCE BEEN MOVED (Specify Date)
EXISTING (const. before 11/25/00) or NEW (or modified)
SOURCE
OPERATION (estimated hours per year for source)
IS THERE AN APCD (air pollution control device)
DATE OF APCD INSTALLED

* This item is critical to determining the standards that apply to the emission point
Fuel Information
TYPE OF FUEL USED, %S (during sampling)
ORIGINAL FUEL USED, %s
DATE FUEL CHANGED?
DAILY CONSUMPTION (LITERS/DAY)
IS FUEL ANALYSIS AVAILABLE?
IS FUEL ANALYSIS PROVIDED BY THE PLANT?

Process Information
OPERATING RATE DURING TEST?
IS THE APCD OPERATING DURING SAMPLING?
APCD PARAMETER? 9gpm, delta P, etc.)
IS PROCESS LOGSHEET AVAILABLE?
IS LOGSHEET PROVIDED BY THE PLANT?
PARAMETERS MONITORED BY THE PANT

SOURCE PERMIT PROVIDED BY THE PLANT

NOTES:

Information recorded/gathered by: Information supplied by:

____________________________________ ____________________________________
Name and Signature of GTI personnel on-site Name and Signature of facility representative

You might also like