MINIMUM SWING RADIUS

There are times when we may change the content of the catalogue without warning There are times when printed photographs may differ from the retailer's actual specifications
Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every
effort has been made to ensure safety There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color Please always
ensure that you have read the instruction manual before operating this vehicle A special license (Certification of the completion of a vehicle type construction machinery skilled
operator's course) is required to operate construction machinery in excess of 3 tons Operation of specified cranes requires completion of a vehicle type construction machinery
skilled operator's course, or completion of a small size mobile crane skilled operator's course

75X.02T.01 Printed in japan

 MADE IN JAPAN
The world knows that Japanese design and manufacturing is the best especially for industrial products. The hydraulic excavator is
not the exception when a total integration concept is required in design work involving key components, manufacturing engineer-
ing and product quality assurance in the factory.
All SUMITOMO hydraulic excavators are engineered and assembled in SUMITOMO's its one and only factory located in Chiba
City, Japan, and distributed to each country in the world. This distinctive feature is unique to SUMITOMO, giving the SUMITOMO
machine users total comfort and reliance on product quality.
(Note: Some of the items manufactured and sourced in other countries may be assembled in Japan.)

1 2
 Minimum Swing Radius
In addition to boasting top-class compact rotational capability for cramped areas, outstanding stability,
and powerful digging and drive strength have been realized.
On various kinds of work-sites it can always be trusted to perform and maneuver exactly as the operator intends.

Clearing the Non-road Special Motor

Suction
Vehicle Exhaust Emission Standard

Cooled water release Cooled water intake

Cooled EGR system EGR Control unit
Partial utilization cooler
Exhaust gas is re-circulated and combustion of exhaust
temperature lowered by the EGR (Exhaust Gas system EGR valve
Recirculation) engine. In addition, a water-cooled
EGR system has been employed, which further
efficiently reduces NOx (nitrogen oxide).
Piston
Connecting rod
Exhaust

Cooled condensed air (flows to the engine)

Turbo engine with intercooler

Air intake efficiency is improved by the intercooler.

Intercooler
It cools air taken in, which has been heated by the

Radiator
compression of the turbo charger. In addition to a External air Engine

great reduction of NOx and PM, high output and

improved fuel consumption have been realized.
Suction Exhaust
Compressed
hot air Turbo charger

Minimum front Tail swing

1785mm
SH60-21750mm
swing radius radius 1235 mm
SH60-21750mm

Excess of full
Precision movement and rear swing width

Rotational ABS
secure operational control,
front and back,
515mm
Bucketdigging Arm digging SH60-2
A rotation shock-absorber device has been installed to soften jolts that with a rounded body-form
capacity capacity occur when the vehicle halts rotation. This is particularly useful for that minimizes excess width

57kN 39kN pinpointing position, and preventing spillages during manual operation.

Diversified operational field Employment of speed assisted mechanics

Road works Forest road works Demolition works Through employing an oil return system in the arm and boom,
speed assisted operations for digging, as well as fuel consumption,
190mm 2320mm 75mm Width

have been improved. Excess cab width Track width Excess rear width 3020mm
3 4
 Maintenance
Diverse innovations designed to reduce running costs and make maintenance easy.
In terms of both cost and labor, you will really come to appreciate its efficiency the longer you use it.

Ground Level Access Ease of cleaning around

Various parts of the excavator can now be cleaned and changed from ground level without climbing radiator
onto the body of the vehicle. Maintenance is no longer troublesome.

Oil cooler

Inter-cooler
Radiator

Engine Oil Drain Coupler
The engine oil pan is provided with a drain
coupler. This makes it easier to do drain work
and prevents oil from spattering because of
the attached drain hose.

Fuel and oil filters

The fuel and oil filters are installed in
positions that can be accessed from ground
level, so replacing them is made simple.

Double element air cleaner

Water separator
Condenser
Fuel filter
Battery (maintenance free)
Oil filter
Reserve tank

High-Performance Return Filter The High-Performance Return Filter is made more precisely to condense
the Nephron filter function.
The hydraulic oil change interval is 5,000 hours, and the return filter
change interval is 2,000 hours. One high performance return filter keeps
the same level of filtering effect as a nephron.

Hydraulic oil change 5,000 hours

Life of filter 2,000 hours Conventional return filter High-performance
return filter
The oil and filter change interval depends on the working conditions.

EMS (Easy Maintenance System) Bucket greasing interval 250 hours

as Standard Greasing interval for other sections1,000 hours
The greasing interval depends on the working conditions.
SUMITOMO's new improved EMS keeps the pins and bushes fully lubri-
cated at all times and prevents rattling. This system significantly extends EMS bushing
the service life of the pins and bushes.
Solid lubricant
The interval of greasing around the bucket is 250 hours, and the interval for the other
sections is 1,000 hours, keeping the joints lubricated for a long time and extending Dust seal
the service life of parts by reducing abrasion and rattling. Plated pin

High-strength brass Special bushing

A solid lubricant embedded in high strength brass forms a layer on the bushing surface to prevent
contact between metals, maintaining an excellent lubricated state to reduce the abrasion of joints.

The surface of the pin is plated to increase the surface hardness and to improve the wear
resistance accordingly.

Precautionary use of EMS

Grease is enclosed, however, greasing is necessary every 1000 hours or six months
depending on the level of dusting conditions.
Greasing is also necessary after any components have been submerged underwater for
Sections equipped with prolonged periods.
EMS bushing Greasing is also recommended after use with hydraulic breakers, crushers or other high
impact attachments such as rock saws etc.
Bucket pins should be cleaned thoroughly when removing or attaching new buckets.

5 6
 Operator Comfort and Safety
How safely, and in what level of comfort can the driver carry out daily operations?
We have extended every possible care and attention to ensure that both safety and comfort are provided.

Comfortable and spacious cab

Spacious foot space Air conditioner installed Employment of fluid-mount
as standard suspension to reduce fatigue
An air conditioner is fitted as standard. Front facing Impacts and vibrations on the cab are
airflow vents and a defrosting function allow a effectively absorbed, providing a pleasant and
pleasant work environment to be maintained. comfortable ride, as well as reducing noise
levels inside the cab. Operator fatigue is
reduced.

Travel pedals are optional equipment

Floor design allows easy Slide-door windows

access to and from cab
Silicon oil

AM/FM radio Stereo speakers

Full operation-console slide Gate-type lock lever

adjustment (Reclining seat) on the operation lever
to prevent operational errors

Seat slide range

120 mm

Total slide range

240 mm Operation-console
slide range

120 mm

Emergency escape hammer Reversing rear-view mirror Cab roof window Membrane switch Emergency stop switch Defroster/Cup holder

7 8
 Lifting Capacity Working Range Dimensions

BLADE : UP ARM LENGTH = 1.71 (m) BLADE : DOWN ARM LENGTH = 1.71 (m)
ARM : STD ARM MAXIMUM REACH = 5.52 (m) ARM : STD ARM MAXIMUM REACH = 5.52 (m) A
SHOE : 450G TIPPING CAPACITY (MARK: ) = 75.0 (%) SHOE : 450G TIPPING CAPACITY (MARK: ) = 75.0 (%) F G
BUCKET : 0.28BUCKET HYDRAULIC CAPACITY (MARK:*) = 87.0 (%) BUCKET : 0.28BUCKET HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)
Bucket Bucket
A
Radius of Load Radius of Load
Hook Hook B C
Height Max.Radius 5m 4m 3m 2m Min.Radius Height Max.Radius 5m 4m 3m 2m Min.Radius
We 1610* 4.07 1670* 1600* 1590* 2.88 We 1610* 4.07 1670* 1600* 1590* 2.88
5m 5m
Ws 1610* 4.07 1670* 1600* 1590* 2.88 Ws 1610* 4.07 1670* 1600* 1590* 2.88

We 1490 4.8 1700* 1770* 1810* 2.56 We 1560* 4.8 1700* 1770* 1810* 2.56
4m 4m
Ws 1340 4.8 1700* 1770* 1810* 2.56 Ws 1340 4.8 1700* 1770* 1810* 2.56 F
We 1250 5.25 1360 1900* 2230* 2990* 4180* 1.39 We 1600* 5.25 1730* 1900* 2230* 2990* 3180* 1.86
3m 3m
Ws 1120 5.25 1220 1790 2230* 2990* 4180* 1.39 Ws 1120 5.25 1220 1790 2230* 2990* 4180* 1.39 C G
We 1130 5.47 1320 1900 2860* 4260* 2.11 We 1710* 5.47 1860* 2190* 2860* 4260* 2.11
2m 2m
Ws 1010 5.47 1180 1690 2670 4260* 2.11 Ws 1010 5.47 1180 1690 2670 4260* 2.11 D H
D E
We 1080 5.51 1270 1800 2840 2420* 2.2 We 1830* 5.51 1990* 2460* 3400* 2420* 2.2
1m 1m
Ws 970 5.51 1130 1600 2470 2420* 2.2 Ws 970 5.51 1130 1600 2470 2420* 2.2

We 1100 5.36 1230 1730 2720 2490* 1990* 1.78 We 1920* 5.36 2070* 2630* 3620* 2490* 2140* 1.86 J
0 0
Ws 980 5.36 1090 1530 2360 2490* 1990* 1.78 Ws 980 5.36 1090 1530 2360 2490* 1990* 1.78 K L
We 1210 5.01 1210 1690 2670 3910* 2690* 1.11 We 2020* 5.01 2020* 2630* 3570* 3910* 3590* 1.86
-1m -1m
Ws 1070 5.01 1070 1490 2320 3910* 2640* 0.98 Ws 1070 5.01 1070 1490 2320 3910* 2640* 0.98 H
We 1470 4.4 1690 2680 4560* 4110* 1.11 We 2120* 4.4 2410* 3250* 4560* 4810* 1.86
-2m -2m I
Ws 1300 4.4 1490 2330 4560* 4000* 0.99 Ws 1300 4.4 1490 2330 4560* 4000* 0.99 I
We 2200* 3.41 2550* 3520* 3880* 1.72 We 2200* 3.41 2550* 3520* 3700* 1.86
-3m -3m
Ws 1960 3.41 2390 3520* 3880* 1.72 Ws 1960 3.41 2390 3520* 3880* 1.72
E P R
WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE B
Q O
M
N
BLADE : UP ARM LENGTH = 2.12 (m) BLADE : DOWN ARM LENGTH = 2.12 (m)
ARM : LONG ARM MAXIMUM REACH = 5.92 (m) ARM : LONG ARM MAXIMUM REACH = 5.92 (m)
SHOE : 450G TIPPING CAPACITY (MARK: ) = 75.0 (%) SHOE : 450G TIPPING CAPACITY (MARK: ) = 75.0 (%)
BUCKET : 0.22BUCKET HYDRAULIC CAPACITY (MARK:*) = 87.0 (%) BUCKET : 0.22BUCKET HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)
Bucket Radius of Load Bucket Radius of Load
Hook Hook
Height Max.Radius 5m 4m 3m 2m Min.Radius Height Max.Radius 5m 4m 3m 2m Min.Radius Working Range Dimensions
We 1390* 4.59 1430* 1350* 3.29 We 1390* 4.59 1430* 1350* 3.29 SH75X-3B SH75X-3B
5m 5m
Ws 1390* 4.59 1430* 1350* 3.29 Ws 1390* 4.59 1430* 1350* 3.29 Arm length 1.71m 2.12m Arm length 1.71m 2.12m
We 1290 5.25 1420 1490* 1470* 3.03 We 1350* 5.25 1500* 1490* 1470* 3.03 A Max. digging radius 6520mm 6900mm A Overall length 5915mm 5910mm
4m 4m
Ws 1160 5.25 1280 1490* 1470* 3.03 Ws 1160 5.25 1280 1490* 1470* 3.03 B Max. digging depth 4140mm 4540mm B Length from center of machine (to arm top) 4492mm 4487mm
We 1100 5.66 1380 1700* 1920* 2270* 2.08 We 1370* 5.66 1590* 1700* 1920* 2270* 2.08 C Max. digging height 7330mm 7620mm C Length from center of machine (to shoe top) 1425mm
3m 3m
Ws 990 5.66 1240 1700* 1920* 2270* 2.08 Ws 990 5.66 1240 1700* 1920* 2270* 2.08 D Max. dumping height 5250mm 5540mm D Center to center of wheels 2210mm
We 1000 5.87 1330 1930 2560* 3920* 2.03 We 1450* 5.87 1740* 2010* 2560* 3920* 2.03 E Max. vertical wall cut depth 3640mm 4100mm E Overall track length 2845mm
2m 2m
Ws 900 5.87 1190 1720 2560* 3920* 2.03 Ws 900 5.87 1190 1720 2560* 3920* 2.03 F Min. front swing radius 1785mm 2085mm F Overall height 2900mm 2950mm
We 960 5.91 1270 1810 2880 3000* 2.13 We 1590* 5.91 1900* 2330* 3180* 3000* 2.13 G Rear end swing radius 1235mm G Clearance height under upper structure 745mm
1m 1m
Ws 860 5.91 1130 1610 2510 3000* 2.13 Ws 860 5.91 1130 1610 2510 3000* 2.13 H Max. lift above ground 415mm H Shoe lug height 20mm
We 970 5.77 1220 1730 2730 2570* 1900* 1.69 We 1740* 5.77 2020* 2550* 3530* 2570* 2220* 1.86 I Min. drop below ground 205mm I Cab height 2700mm
0 0
Ws 870 5.77 1090 1530 2370 2570* 1900* 1.69 Ws 870 5.77 1090 1530 2370 2570* 1900* 1.69 J Upper structure overall width 2225mm
We 1050 5.44 1190 1670 2650 3540* 2290* 1.11 We 1830* 5.44 2040* 2620* 3590* 3540* 3230* 1.86 Principal specifications K Width from center of machine (left side) 1065mm
-1m -1m
Ws 930 5.44 1060 1480 2300 3540* 2210* 0.98 Ws 930 5.44 1060 1480 2300 3540* 2210* 0.98 SH75X-3B L Width from center of machine (right side) 1160mm
We 1230 4.89 1660 2640 4930* 3450* 1.11 We 1940* 4.89 2500* 3390* 4930* 4610* 1.86 STD Specifications M Track gauge 1870mm
-2m -2m
Ws 1090 4.89 1460 2290 4770 3340* 0.98 Ws 1090 4.89 1460 2290 4770 3340* 0.98 Arm length 1.71m N Overall track width with 450mm 2320mm
3
We 1680 4.03 1690 2680 4070* 4930* 1.11 We 2040* 4.03 2060* 2880* 4070* 4310* 1.86 Bucket capacity (ISO heaped) 0.28m 600mm 2470mm
-3m -3m
Ws 1480 4.03 1490 2330 4070* 4930* 1.11 Ws 1480 4.03 1490 2330 4070* 4930* 1.11 Std. Operating weight 7920kg O Std. Shoe width 450mm
WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE Make & model ISUZU AU-4LE2X P Minimum ground clearance 360mm
-1
Engine Rated output 40.0kw/2000min Q Width of blade 2320mm
Displacement 2179ml(cc) R Height of blade 450mm
Main pump 2 variable displacement axial piston pumps
Max pressure 29.4Mpa Bucket
Hydraulic
Travel motor Variable displacement axial piston motor Model SH75X-3B
System 3 3 3 3 3
Parking brake type Mechanical disc brake Bucket capacity (ISO/SAE/PCSA heaped) 0.11m 0.17m 0.22m 0.28m 0.34m
3 3 3 3 3
Swing motor Fixed displacement axial piston motor Bucket capacity (CECE heaped) 0.10m 0.15m 0.19m 0.24m 0.30m
Travel speed 5.1/3.3km/h Bucket type STD STD STD STD STD
Drawbar pull 59kN No. of tooth 3 3 4 4 4
Grade ability 70% <35
> Width With side cutter - - 673mm 804mm 945mm
Performance Ground pressure 35kPa Without side cutter 370mm 480mm 600mm 730mm 865mm
-1
Swing speed 9.5min Weight 136kg 161kg 178kg 204kg 227kg
Standard equipment Optional equipment Bucket 57kN 1.71m arm
Arm 38kN 2.12m arm
Hydraulics system Travel alarm Automatic lock for front facing Others Tool kit Quick change 4way (Kit) Suitable for materials with density up to 2000kg/m3 or less
Fuel tank 100liter
High-performance return filter Theft prevention dog-chain window Engine that complies with Grease gun Travel pedal Others Standard bucket (Suitable for materials with density up to 1800kg/m3 or less)
One-touch idle Boom holding valve Automatic point wiper tear-3 exhaust emissions Fuel filter Hydraulic fluid tank 97liter Suitable for materials with density up to 1600kg/m3 or less
Changeable 2-speed-travel Engine emergency stop connecter regulations Double-element air cleaner Suitable for materials with density up to 1200kg/m3 or less
Not available
Rotational ABS switch Intermittent wiper with washer EMS (Easy Maintenance Weight & Ground pressure
Safety equipment Cab/interior equipment Reclining seat System)
Rear-view mirror KAB seat Cup holder Long life hydraulic fluid Model SH75X-3B
Gate lock lever Large-size rounded cab Ashtray Front-face protective net for Shoe type Shoe width Overall width Operating weight Ground pressure
Emergency escape hammer Fluid mount Room lamp radiator
Triple grouser shoe 450mm 2320mm 7920kg 35kPa
Seat belt Air conditioner Hat hook Aluminum radiator
Cab-top headlight Defroster AM/FM Radio Aluminum oil cooler 600mm 2470mm 8030kg 27kPa

9 10