Scribd
Upload
118 views1 page

Spreadsheets To BS 8110 Etc: The Concrete Centre

The document analyzes the design of basement walls according to BS 8110. It evaluates the reinforcement and checks shear resistance and crack width for the outer and inner bases of the wall. The analysis finds the design meets the requirements for reinforcement area, moment capacity, shear resistance and limiting crack width.

Uploaded by

mdelacua2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views1 page

Spreadsheets To BS 8110 Etc: The Concrete Centre

The document analyzes the design of basement walls according to BS 8110. It evaluates the reinforcement and checks shear resistance and crack width for the outer and inner bases of the wall. The analysis finds the design meets the requirements for reinforcement area, moment capacity, shear resistance and limiting crack width.

Uploaded by

mdelacua2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project Spreadsheets to BS 8110 etc The Concrete Centre

Client Advisory Group Made by Date Page


Location Grid line 2 rc 17-Oct-2017 130
Basement wall design to BS8110:2005 Checked Revision Job No
Originated from 'RCC61 Basement Wall.xls' v4.0 2006 TCC chg - R68

OUTER BASE ( per metre length ) BS8110


f = 1.50 (ASSUMED) reference
Ult. Shear = 10.35 kN (AT d from FACE of WALL)
Ult. MT. = 1.67 kNm TENSION - BOTTOM FACE

BOTTOM REINFORCEMENT : Min. As = 455 mm2 Table 3.25


= 12 mm
centres = 225 mm < 762 OK
As = 503 mm2 > 455 OK

MOMENT of RESISTANCE : d= 304 mm


Z= 289 mm 3.4.4.4
As' = 0 mm2
Mres = 63.12 kNm > 1.67 OK

SHEAR RESISTANCE: 100As/bd = 0.28%


vc = 0.42 N/mm2 Table 3.8
Vres = 126.35 kN > 10.35 OK 3.5.5.2

CHECK CRACK WIDTH IN ACCORDANCE WITH BS8100/8 Temp & shrinkage effects not included
X= 60.69 mm m = -0.00109 BS8007
Acr = 115.54 mm W= -0.25 mm < 0.30 OK App. B.2
NO CRACKING

INNER BASE ( per metre length )


Ult. Shear = -67.05 kN (AT d from FACE of WALL)
Ult. MT. = 39.60 kNm TENSION - BOTTOM FACE

BOTTOM REINFORCEMENT : Min. As = 455 mm2 Table 3.25


= 12 mm
centres = 225 mm < 762 OK
As = 503 mm2 > 455 OK

MOMENT of RESISTANCE : d= 304 mm


Z= 289 mm
As' = 0 mm2
Mres = 63.12 kNm > 39.60 OK 3.4.4.4

SHEAR RESISTANCE: 100As/bd = 0.17%


vc = 0.42 N/mm2 Table 3.8
Vres = 126.35 kN > 67.05 OK 3.5.5.2

CHECK CRACK WIDTH IN ACCORDANCE WITH BS8100/8 Temp & shrinkage effects not included
X= 60.69 mm m = -4E-05 BS8007
Acr = 115.54 mm W= -0.01 mm < 0.30 OK App. B.2
NO CRACKING

REINFORCEMENT SUMMARY for BASE


Type centres As Min. As
mm mm mm2 mm2
TOP H 12 225 503 455 OK
BOTTOM T 12 225 503 455 OK
TRANSVERSE T 12 225 503 455 OK

You might also like