INNOTECH Arbeitsschutz GmbH
FASTENING SETS
(EAP / AIO)
Order No. Description Material
BEF 103 Fastening set for QUADRAT-10/11: zinced
CONCRETE (min. C20/25) and CONCRETE HOLLOW CORE CONCRETE SLAB
(min. C 5060 B4 and 35mm concrete thickness of the minimum diameter of the hollow core
concrete slab, drill deep min. 60 mm with 8 mm)
4 anchors Hilti HUS-H 10,5 x 55/-/5
BEF 104 Fastening set for: CRACKED- and NON-CRACKED CONCRETE zinced
(min. C20/25)
4 anchors Fischer FAZ II 12/10
BEF 105 Fastening set for: CRACKED- and NON-CRACKED CONCRETE + leveling zinced
concrete until 140 mm
(min. C20/25)
4 anchors Fischer FAZ II 12/150
BEF 107 Fastening set for: HOLLOW CORE CONCRETE SLABS (min. C 5060 B4) zinced
Minimum widths of the hollow core concrete slab: 30mm concrete thickness
8 anchors FISCHER FHY M10
8 hexagonal bolts DIN933 M10 x 60
8 washers M10
BEF 108 Fastening set for: CRACKED- and NON-CRACKED CONCRETE zinced
(min. C20/25)
4 flat head anchors FISCHER FH II 15/15 SK (inside hexagon, wrench size 6)
BEF 201 Fastening set for: WOOD RAFTER min. 16/16 cm zinced
8 wood screws 8 x 140 mm, minimum perforation deep in static capable of bearing wood:
100 mm,
incl. 4 washers for the corner holes
BEF 203 Fastening set for: WOOD RAFTER min. 8/10 cm (old: AIO SCHI) zinced
Only in association with EAP STABIL-10, AIO STA-10 or AIO STA-11
Steep roof bar (1250 x 195 x 35 mm) with accessories for post attachment, incl. 8 fastening
screws 8 x 220 mm
minimum perforation deep in the static capable of bearing construction: 90 mm
Its also possible to order extra other screw lengths at Accessories 07!
BEF 204 Fastening set for: WOOD RAFTER min. 16/16 cm zinced
4 wood screws (8x120 mm) minimum perforation deep in static capable of bearing wood:
110 mm
BEF 302 Fastening set for: TRAPEZOIDAL SUPPORTING SHEET zinced
Steel thickness minimum 0,75 mm,
incl. 12 pc. self cutting screws for attachment of the QUAD-10 post
Suitability test: see picture below this table
BEF 303 Fastening frame for optimum load distribution zinced
Different application opportunities
Dimensions: 840 x 840 x 40 mm
CAUTION: Order suitable FASTENINGSET (BEF 303-1 or BEF 303-3)!
BEF 303-1 Fastening set for fastening frame BEF 303: zinced
TRAPEZOIDAL SUPPORTING SHEET with a raised bead breadth of more
than 60 mm
4 fastening clamps with each 4 self cutting screws
(Steel sheet strength: min 0,6 mm)
BEF 303-3 Fastening set for fastening frame BEF 303: zinced
TRAPEZOIDAL SUPPORTING SHEET with a raised bead breadth of less
than 60 mm
4 metal toggles (anchors)
Minimum free space below the raised bead: 115 mm
Drill diameter: 28 mm (Steel sheet strength: min 0,6 mm)
BEF Fastening set: COUNTER PLATE zinced
Counter plate: 150 x 150 x 8 mm
401-10
Thread rods M12, 4 lock nuts M12, 8 washers M12, 8 nuts M12
Order extra at Accessories 07!
BEF Fastening set: COUNTER PLATE zinced
Counter plate: 300 x 300 x 8 mm
401-12 Maximum breadth of the clamp: 185 mm or 255 mm
Thread rods M12, 4 lock nuts M12, 8 washers M12, 8 nuts M12
Order extra at Accessories 07!
BEF XXX Fastening set: STEEL zinced
4 hexagonal bolts M12x, 8 washers M12, 4 locknuts M12
Order extra at Accessories 07!
