Scribd
Upload
227 views6 pages

A.C. Generator: Principles and Operation

The document describes the construction and working of an alternating current (AC) generator. It consists of a coil that rotates in a magnetic field, producing an induced electromotive force (emf). As the coil rotates, the direction of the induced current reverses, generating an alternating current. Slip rings and brushes are used to draw the alternating current from the generator terminals to a load. The instantaneous emf produced is expressed as ε = ε0 sinωt, where ε0 is the maximum emf and ω is the angular speed of the rotating coil.

Uploaded by

Chandan Kumar Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
227 views6 pages

A.C. Generator: Principles and Operation

The document describes the construction and working of an alternating current (AC) generator. It consists of a coil that rotates in a magnetic field, producing an induced electromotive force (emf). As the coil rotates, the direction of the induced current reverses, generating an alternating current. Slip rings and brushes are used to draw the alternating current from the generator terminals to a load. The instantaneous emf produced is expressed as ε = ε0 sinωt, where ε0 is the maximum emf and ω is the angular speed of the rotating coil.

Uploaded by

Chandan Kumar Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

PROJECT REPORT ON PHYSICS A.C.

GENERATOR

A.C. GENERATOR - INTRODUCTION

A.C. Generator is a device which is used to convert

the mechanical energy in to electrical energyis

called electric generator.

Principle of A.C. Generator


It is based on the principle of electro magnetic induction.

When a coil rotated about on axis perpendicular to the

direction of uniform magnetic field, an induced e.m.f. is

produced across it.


Construction of A.C. Generator
The A.C. Generator is consist of four main parts :

(1) THE COIL (ARMATURE) :


A rectangular coil ABCD consist of a large number of

turns of copper bound over a soft iron core is called

armature. The soft iron core is used to increase the

magnetic flux.

(2) MAGNETIC FIELD :


It is usually a permanent sponge magnet having concave

poles. The armature is rotated of a magnet so that axis of

the armature is perpendicular to magnetic field lines.


(3) SLIP RINGS :
Slip rings are the magnetic rings which are connected in

the terminal of the armature. These rings are rotated with

the coil and these are use to draw the current from the

generator.

(4) BRUSHES :
The brushes B1 & B2 are just touch the slip rings. They

are not rotating with the coil and these brushes leads to

the output of load resistance.

Working of A.C. Generator


The coil is rotated in anti-clock wide direction. In the first

half rotation the arm AB is moving outward and CD is

moving inward. So the e.m.f. is induced in the arm AB

from A to B. And in the arm CD from C to D. After half


rotation (in the second half). The arm CD is moving

outward and AB is moving inward. In this time current is

induced in arm CD from D to C. And in arm AB from B

to A. In the second half rotation the current direction is

changing so in this generator AC is produced.

Expression for Instantaneous e.m.f. Produced :

Let position of the coil at any time t. It's make angle an

angle with vertical. If is uniform angular speed of the

coil.

Then = t
B be the strength of magnetic field n be the

number of turns in the coil and A area of the coil then

magnetic flux with the coil in this position is given by :

= nBA Cos = nBA Cos t.

differentiate w.r.t. time.

= nBA (-Sin t)

= -nBA Sin t

= = -(-nBA Sin t)

maximum value of e.m.f. say 0


= 0 Sin t.

You might also like