0% found this document useful (0 votes)
55 views1 page

Room Lighting Analysis and Specifications

This document summarizes the lighting design for Room 1. Key details include: - The room height is 11.810 ft with a mounting height of 11.810 ft and a light loss factor of 0.80. - Illuminance levels on various surfaces were analyzed, with the workplane receiving 18 fc on average. - Thirty light fixtures were used, each containing two 28W OSRAM lamps, for a total connected load of 1890W. - The specific connected load was 0.38W per square foot to achieve an average of 10 fc on the workplane.

Uploaded by

Scalper
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
55 views1 page

Room Lighting Analysis and Specifications

This document summarizes the lighting design for Room 1. Key details include: - The room height is 11.810 ft with a mounting height of 11.810 ft and a light loss factor of 0.80. - Illuminance levels on various surfaces were analyzed, with the workplane receiving 18 fc on average. - Thirty light fixtures were used, each containing two 28W OSRAM lamps, for a total connected load of 1890W. - The specific connected load was 0.38W per square foot to achieve an average of 10 fc on the workplane.

Uploaded by

Scalper
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project 1

11 / 28 / 2017

Operator
Telephone
Fax
e-Mail

Room 1 / Summary

Height of Room: 11.810 ft, Mounting Height: 11.810 ft, Light loss factor: Values in Footcandles, Scale 1:296
0.80

Surface [%] Eav [fc] Emin [fc] Emax [fc] u0


Workplane / 18 9.86 22 0.560
Floor 20 17 10 20 0.608
Ceiling 80 5.19 3.74 55 0.721
Walls (4) 50 12 5.11 17 /

Workplane:
Height: 2.493 ft
Grid: 64 x 64 Points
Boundary Zone: 0.000 ft
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.677, Ceiling / Working Plane: 0.291.
Proportion of points with less than 400 lx (for IEQ-7): 100.00%.
Luminaire Parts List

No. Pieces Designation (Correction Factor) (Luminaire) [lm] (Lamps) [lm] P [W]
YLI INDUSTRY SDN BHD WG5 228 (OSRAM
LUMILUX T5 HE 28W/840) ([Link]
1 30 3829 5800 63.0
OSRAM QTz5 2x28) (2x28W) C4 (E) (Type 1)
* (1.000)
*Modified Technical Specifications Total: 114883 Total: 174000 1890.0

Specific connected load: 0.38 W/sq ft = 0.22 W/sq ft/10 fc (Ground area: 4987.64 sq ft)

DIALux 4.13 by DIAL GmbH Page 1

You might also like