GMT100 @Track Air Interface Protocol

GSM/GPRS/GPS Tracker GMT100

@Track Air Interface Protocol
Application Notes: TRACGMT100AN001
Revision: 1.0

TRACGMT100AN001 –0–
http://www.queclink.com
[email protected]
GMT00 @Track Air Interface Protocol

Document Title GMT100 @Track Air Interface Protocol

Version 1.0

Date 2011-08-16

Status Draft

Document Control ID TRACGMT100AN001

General Notes
Queclink offers this information as a service to its customers, to support application and

k
engineering efforts that use the products designed by Queclink. The information provided is

l
based upon requirements specifically provided to Queclink by the customers. Queclink has

i n
not undertaken any independent search for additional relevant information, including any

l a
information that may be in the customer‟s possession. Furthermore, system validation of this

i
product designed by Queclink within a larger electronic system remains the responsibility of

c t
the customer or the customer‟s system integrator. All specifications supplied herein are

e n
subject to change.

u e
Copyright

Q nfid
This document contains proprietary technical information which is the property of Queclink
Limited. The copying of this document, distribution to others, and communication of the
contents thereof, are forbidden without express authority. Offenders are liable to the payment
of damages. All rights are reserved in the event of a patent grant or registration of a utility
model or design. All specification supplied herein are subject to change without notice at any

o
time.

C
Copyright © Queclink Wireless Solutions Co., Ltd. 2011

TRACGMT100AN001 –1–
GMT00 @Track Air Interface Protocol

Contents

Contents ............................................................................................................................................ 2
0. Revision history ............................................................................................................................ 4
1. Overview ....................................................................................................................................... 5
1.1. Scope of This Document ..................................................................................................... 5
1.2. Terms and Abbreviation ...................................................................................................... 5
2. System Architecture ...................................................................................................................... 6
3. Message Description ..................................................................................................................... 7
3.1. Message Format .................................................................................................................. 7
3.2. Command And Acknowledgement ...................................................................................... 9

k
3.2.1. Bearer Setting Information ................................................................................ 9
3.2.2. Backend Server Register Information ............................................................. 11

n l
3.2.3. Quick Start Setting .......................................................................................... 14

l i a
3.2.4. Global Configuration....................................................................................... 16

i
3.2.5. Digital Output.................................................................................................. 20

c t
3.2.6. Digital Input Port Setting ................................................................................ 23

n
3.2.7. Input/Output Port Binding............................................................................... 25

e
3.2.8. External Power Supply Monitoring ................................................................. 27

u e
3.2.9. Analog Input Port Setting ................................................................................ 29
3.2.10. Fixed Report Information ................................................................................ 31

Q nfid
3.2.11. Geo-Fence Information ................................................................................... 34
3.2.12. Tow Alarm Configuration ............................................................................... 36
3.2.13. Speed Alarm .................................................................................................... 39
3.2.14. SOS Function .................................................................................................. 41
3.2.15. Excessive Idling Detection .............................................................................. 43

o
3.2.16. Harsh Behavior Monitoring ............................................................................ 45
3.2.17. Time Adjustment ............................................................................................. 48

C
3.2.18. Outside Working Hours ................................................................................... 50
3.2.19. Protocol Watchdog .......................................................................................... 52
3.2.20. Auto-unlock PIN ............................................................................................. 54
3.2.21. Real Time Operation ....................................................................................... 56
3.2.22. Ignition Time Counter ..................................................................................... 58
3.2.23. Jamming Detection.......................................................................................... 60
3.3. Report ................................................................................................................................ 62
3.3.1. Position Related Report................................................................................... 62
3.3.2. Device Information Report.............................................................................. 71
3.3.3. Report of Real Time Querying ........................................................................ 74
3.3.4. Event Report.................................................................................................... 91
3.3.5. Buffer Report................................................................................................. 104
3.3.6. Report Google Maps hyperlink ..................................................................... 105
3.4. Heartbeat ......................................................................................................................... 106

TRACGMT100AN001 –2–
GMT00 @Track Air Interface Protocol
3.5. Server Acknowledgement................................................................................................ 107
Appendix: Message Index ............................................................................................................. 108

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 –3–
GMT100 @Track Air Interface Protocol

0. Revision history

Revision Date Author Description of change

V1.0 2011-09-13 Hendry PAN Initial

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 –4–
GMT00 @Track Air Interface Protocol

1. Overview

1.1. Scope of This Document

The @Track Air Interface Protocol is a digital communication interface based on printable ASCII
characters over SMS or GPRS which is used for all communication between the backend server
and the terminal. The backend server sends a command to the terminal and then the terminal
confirms with an acknowledgement message. If necessary, the terminal also sends report messages
to the backend server.

k
The purpose of this document is to describe how to build up the backend server based on the
@Track Air Interface Protocol.

l i n ia l
1.2. Terms and Abbreviation

ec n t
Abbreviation Description
APN Access Point Network

u e
ASCII American National Standard Code for Information Interchange

Q nfid
GPRS General Packet Radio Service
GSM Global System for Mobile Communications
HDOP Horizontal Dilution of Precision
ICCID Integrated Circuit Card Identity
IP Internet Protocol

o
SMS Short Message Service
TCP Transmission Control Protocol

C
UDP User Datagram Protocol
UTC Coordinated Universal Time

TRACGMT100AN001 –5–
GMT00 @Track Air Interface Protocol

2. System Architecture

i n k a l
c l t i
n
The backend server can be accessed by many terminals and should have the following abilities:

e
 The backend server should be able to access the internet and listen to the connection

u e
originating from the terminal.
 The backend server should be able to support a TCP or UDP connection with the terminal. It

Q nfid
should be able to receive data from the terminal and send data to the terminal.
 The backend server should be able to receive and send SMS.

C o

TRACGMT100AN001 –6–
GMT00 @Track Air Interface Protocol

3. Message Description

3.1. Message Format

All of the @Track Air Interface Protocol messages are composed of printable ASCII characters.
Each message has the following format:
Message format Message type
AT+GTXXX=<parameter1>,<parameter2>,…$ Command
+ACK:GTXXX,<parameter1>,<parameter2>,…$ Acknowledgement

k
+RESP:GTXXX,<parameter1>,<parameter2>,…$ Report

i n l
The entire message string ends with character „$‟.

l a
The characters „XXX‟ identify the deferent message.

t i
The “<parameter1>,<parameter2>,…” carry the message‟s parameters. The number of parameters

c
is different in different messages. The ASCII character „,‟ is used to separate the neighbouring

e n
parameter characters. The parameter string may contain the ASCII characters:
„0‟–„9‟, ‟a‟–„z‟, ‟A‟–„Z‟.

u e
Detailed descriptions of each message format are located in the specific message sections.

Q nfid
By sending Commands to the terminal, the backend server can either configure and query the
parameters of the terminal or control the terminal to perform specific actions. When the terminal
receives Commands over the air, it will reply with a corresponding Acknowledgement message.
According to the configuration of the parameters, the terminal can send Report messages to the

o
backend server. Please see the following figure:

C
TRACGMT100AN001 –7–
GMT00 @Track Air Interface Protocol

Command

Acknowledgement

Terminal Backend
Server
Report

Report

Report

i n k a l
l
Figure 1: @Tracker Protocol messages flow

ec n t i
u
Q nfid e
C o

TRACGMT100AN001 –8–
GMT00 @Track Air Interface Protocol

3.2. Command And Acknowledgement

3.2.1. Bearer Setting Information

The command AT+GTBSI is used to configure the GPRS parameters.

 AT+GTBSI=
Example:
AT+GTBSI=gmt100,cmnet,,,,,,,0000$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

n l
APN <=40

l i ia
APN User Name <=30

c t
APN Password <=30

e n
Reserved 0

u e
Reserved 0

Q nfid
Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

C o
 <Password>: The valid character of password is „0‟–9‟, „a‟ –„z‟, „A‟ –„Z‟. The default value
is “gmt100”.
 <APN>: Access point name (APN).
 <APN User Name>: the GPRS APN user name. If the parameter field is empty, the current
value of this parameter will be cleared.
 <APN Password>: the GPRS APN password. If the parameter field is empty, the current
value of this parameter will be cleared.
 <Reserved>: Not used at present. Please keep empty.
 <Serial Number>: the serial number for the command. It will be invoked in the ACK message
of the command.
 <Tail Character>: a character to indicate the end of the command. And it must be “$”.

The acknowledgment message of AT+GTBSI command:

 +ACK:GTBSI,

TRACGMT100AN001 –9–
GMT00 @Track Air Interface Protocol

Example:
+ACK:GTBSI,080100,135790246811220,,0000,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z', '0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

k
Tail Character 1 $ $

l
 <Protocol Version>: The protocol version that the terminal conforms to. The first two

i n
characters XX point out the device type. 08 means GMT100. The middle two characters

l ia
point out the main version number of protocol and the last two characters point out the sub

c t
version number of protocol. And both of the main version and the minimum version are hex
digital. For example, 020A means version 2.10.

e n
 <Unique ID>: The IMEI of the terminal.
 <Device Name>: The specified name of the device.

u e
 <Serial Number>: A serial number which is equal to the <Serial Number> in the

Q nfid
corresponding command to distinguish which command the ACK message is for.
 <Send Time>: The local time to send the ACK message.
 <Count Number>: A self-increasing count number in each acknowledgment message and
report message. It begins from 0000 and increases by 1 for each message. And it rolls back
after “FFFF”.

o
 <Tail Character>: a character to indicate the end of the command. Must be “$”.

C
Note:
Only after both the command AT+GTBSI and AT+GTSRI are properly set, the ACK
messages and other report messages can be sent to the backend server.

TRACGMT100AN001 – 10 –
GMT00 @Track Air Interface Protocol

3.2.2. Backend Server Register Information

The command AT+GTSRI is used to configure where and how to report all the messages,
including the server information and the communication method between the backend server and
the terminal. When the terminal is configured correctly, it should be able to report data to the
backend server.

 AT+GTSRI=
Example:
AT+GTSRI=gmt100,3,,1,116.226.44.17,7011,116.226.45.229,7012,+8613812341234,15,1,,,,,
0001$
AT+GTSRI=gmt100,3,,1,some.host.name,7011,116.226.45.229,7012,+8613812341234,15,1,,
,,,0001$

k
Parameter Length(byte) Range/Format Default

n l
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

l i a
0–6

i
Report Mode 1 0

c t
Reserved 0

e n
Buffer Mode 1 0–2 1

u e
Main Server IP /
<=60
Domain Name

Q nfid
Main Server Port <=5 0 – 65535

Backup Server IP <=15

Backup Server Port <=5 0 – 65535

o
SMS Gateway <=20

Heartbeat Interval <=3 0|5 – 360min 0

C
SACK Enable 1 0|1 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Report Mode>: This defines the communication method between the backend server and
the terminal. Supported report modes as following:

TRACGMT100AN001 – 11 –
GMT00 @Track Air Interface Protocol
 0: Stop reporting.
 1: TCP short-connection preferred mode. The connection is based on TCP protocol.
The terminal connects to the backend server every time it needs to send data and will
shut down the connection when the terminal finishes sending data. And if it fails to
establish TCP connection to the backend server (both Main Server and Backup
Server), it will try to send data via SMS to the SMS gateway.
 2: TCP short-connection forced mode. The connection is based on TCP protocol. The
terminal connects to the backend server every time it needs to send data and will shut
down the connection when the terminal finishes sending data. And if it fails to
establish TCP connection to the backend server (both Main Server and Backup
Server), it will store the data in the memory buffer if buffer report function is enabled.
Otherwise the data is dropped.
 3: TCP long-connection mode. The connection is based on TCP protocol. The
terminal connects to the backend server and maintains the connection using the heart

k
beat data. The backend server should respond to the heart beat data from the

l
terminals.

i n
 4. UDP mode. The terminal will send data to the backend server by UDP protocol.

l ia
Receiving protocol commands via UDP is supported if the GPRS network allows it. It

c t
is recommended to enable heartbeat sending and +RESP:GTPDP report when UDP
receiving is the case.

e n
 5: Force on SMS. Only use the SMS for transmitting.
 6: UDP with fixed local port. Like the UDP mode, the terminal will send data using

u e
UDP protocol. The difference is the terminal will use fixed local port rather than

Q nfid
random port to communicate with the server in this mode. Thus the backend server
could use identical port to communicate with all terminals if the backend server and
the terminals are all in the same VPN network. The port number the device uses is the
same as the port number of the primary server.
 <Buffer Mode>: The working mode the buffer report function. When buffer report function is

o
enabled, if the device goes into areas without GSM/GPRS network covering, it will stores all
report locally. When the device goes back to areas with GSM/GPRS network covering, it

C
will then send all the buffered reports through GPRS.
 0: Disable the buffer report function.
 1: Low priority. Enable the buffer report function. Under this working mode, the
device will send the buffered messages after sending the normal messages.
 2: High priority. Enable the buffer report function. Under this working mode, the
device will send all the buffered messages before sending any normal message except
for the SOS message (+RESP:GTSOS).
 <Main Server IP / Domain Name>: The IP address or the domain name of the primary server.
 <Main Server Port>: The port of the primary server.
 <Backup Server IP>: The IP address of the backup server.
 <Backup Server Port>: The port of the backup server.
 <SMS Gateway>: Maximum 20 characters including the optional national code starting with
“+” for SMS messages sending. Short code (for example: 10086) is also supported.
 <Heartbeat Interval>: the interval of sending heartbeat package message (+ACK:GTHBD)

TRACGMT100AN001 – 12 –
GMT00 @Track Air Interface Protocol
when report mode is TCP long-connection mode or UDP mode. If set to 0, no heartbeat
package message sending.
 <SACK Enable>: This defines whether the backend server should respond to the terminal
with SACK message when receiving messages from the terminal.
 0: the backend server does not reply SACK message after receiving message from the
terminal.
 1: the backend server replies SACK message when receiving any message from the
terminal.

The acknowledgment message of AT+GTSRI command:

 +ACK:GTSRI,
Example:
+ACK:GTSRI,080100,135790246811220,,0001,20090214093254,11F0$

k l
Parameter Length(byte) Range/Format Default

i n
XX0000 – XXFFFF,

l a
Protocol Version 6

i
X∈{'A' – 'Z','0' – '9'}

c t
Unique ID 15 IMEI

e n
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

u e
Serial Number 4 0000 – FFFF

Q nfid
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

o
Note:

C
Only after both the command AT+GTBSI and AT+GTSRI are properly set, the ACK
messages and other report messages can be sent to the backend server.

TRACGMT100AN001 – 13 –
GMT00 @Track Air Interface Protocol

3.2.3. Quick Start Setting

The command AT+GTQSS is used to configure the GPRS parameter and backend server
information in one command if all these settings are within 160 bytes, otherwise use AT+GTBSI
and AT+GTSRI in two steps.

 AT+GTQSS=
Example:
AT+GTQSS=gmt100,cmnet,,,3,,1,116.226.44.17,7011,116.226.45.229,7012,+861381234123
4,15,1,,,0002$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
APN <=40

n l
APN User Name <=30

l i a
APN Password <=30

c t i
Report Mode 1 0–6 0

e n
Reserved 0

e
0–2

u
Buffer Mode 1 1

Q nfid
Main Server IP /
<=60
Domain Name

Main Server Port <=5 0 – 65535

Backup Server IP <=15

o
Backup Server Port <=5 0 – 65535

SMS Gateway <=20

C
Heartbeat Interval <=3 0|5 – 360min 0

SACK Enable 1 0|1 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

The acknowledgment message of AT+GTQSS command:

 +ACK:GTQSS,

TRACGMT100AN001 – 14 –
GMT00 @Track Air Interface Protocol

Example:
+ACK:GTQSS,080100,135790246811220,,0002,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z', '0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

k
Tail Character 1 $ $

l i n ia l
ec n t
u
Q nfid e
C o

TRACGMT100AN001 – 15 –
GMT00 @Track Air Interface Protocol

3.2.4. Global Configuration

The AT+GTCFG command is used to configure the global parameters.

 AT+GTCFG=
Example:
AT+GTCFG=gmt100,123456,gmt100,,,,,,,,,,,,,,,,,,,0003$
AT+GTCFG=gmt100,,,1,123.4,0,0,0,1,,2FF,,1,1,300,0,,0,1,,,0003$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

New Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z'

'0' – '9' 'a' – 'z' 'A' – 'Z'

k
Device Name <=10 gmt100

l
ODO Enable 1 0|1 0

i n
0.0 – 4294967.0Km

l a
ODO Initial Mileage <=9 0

t i
GPS On Need 1 0|1 0

c
GSM report 1 0–3 0

e n
Report Composition Mask <=4 0000 – FFFF 003F

u e
Power Saving Mode 1 0 –2 1

Q nfid
Reserved 0

Event Mask <=8 00000000 – FFFFFFFF 1FFFF

Reserved 0

o
LED On 1 0|1 0

Info Report Enable 1 0|1 0

C
Info Report Interval <=5 30 – 86400sec 300

Location By Call 1 0–2 0

Reserved 0

Power Mode 1 0–2 0

Agps Mode 1 0|1 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 16 –
GMT00 @Track Air Interface Protocol
 <New Password>: Set to change the current password.
 <Device Name>: An ASCII string to represent the name of the device.
 <ODO Enable>: Enable/disable the odograph function to calculate the total mileage. The
current mileage is included in every position report message.
 <ODO Initial Mileage>: The initial value for calculating the total mileage.
 <GPS On Need>: Whether to close GPS chip after retrieving GPS position information.
 0: Never close GPS chip
 1: Close GPS chip after retrieving GPS information every time.
 <GSM report>: If GPS fixing for the report message +RESP:GTSOS, +RESP:GTRTL,
+RESP:GTLBC, +RESP:GTTOW and +RESP:GTFRI were failed and the parameter
<GSM report> was set to 1, the terminal reports the message +RESP:GTGSM, including the
information of the service cell and the neighbour cells after those messages if cell‟s
information available. If it was set to 2, the terminal will report the message
+RESP:GTGSM after getting GPS position successfully every time if cell‟s information

k
available. If it was set to 3, the terminal will report +RESP:GTGSM no matter what result of

l
getting GPS position every time if cell‟s information available.

i n
 0: Not allow the cells‟ information report.

l a
 1: Allow the cells‟ information report after failed to get GPS position if cell‟s

c t i
information available.
 2: Report the message +RESP: GTGSM after getting GPS position successfully

e n
every time if cell‟s information available.
 3: Report the message +RESP:GTGSM no matter what result of getting GPS

u e
position every time if cell‟s information available.

Q nfid
 <Report Composition Mask>: Bitwise report mask to configure the composition of report
message, especially the GPS information composition.
 Bit 0 for <Speed>
 Bit 1 for < Azimuth >
 Bit 2 for <Altitude>

o
 Bit 3 for GSM tower data, including <MCC>, <MNC>, <LAC>, <Cell ID> and the
<reserved> parameter “00”

C
 Bit 4 for <Mileage>
 Bit 5 for <Send Time>
 Bit 6 for <Device Name>
For each bit, set it to 1 to enable corresponding component in the report, 0 to disable. This
mask is effective to all report messages.
 <Power Saving Mode>: Set mode of power saving function. If mode of power saving
function is set to 1, the fixed report, geo-fence and speed alarm report functions are
suspended when the device is at a standstill or the engine is off. If mode of power saving
function is set to 2, it is mostly like mode 1 and the difference is that the fixed report will not
be suspended and the fix and send interval of it will be set to <IGF Report Interval> in
AT+GTFRI when the engine is off.
 0: Disable power saving function
 1: Mode 1 of power saving function
 2: Mode 2 of power saving function

TRACGMT100AN001 – 17 –
GMT00 @Track Air Interface Protocol
 <Event Mask>: Bitwise mask to configure which event report should be sent to the backend
server.
 Bit 0 for +RESP:GTPNA
 Bit 1 for +RESP:GTPFA
 Bit 2 for +RESP:GTMPN
 Bit 3 for +RESP:GTMPF
 Bit 4 is reserved
 Bit 5 for +RESP:GTBPN
 Bit 6 for +RESP:GTBPF
 Bit 7 for +RESP:GTBPL
 Bit 8 for +RESP:GTBTC
 Bit 9 for +RESP:GTSTC
 Bit 10 for +RESP:GTSOA
 Bit 11 for +RESP:GTSTT

k
 Bit 12 for +RESP:GTANT

l
 Bit 13 for +RESP:GTPDP

i n
 Bit 14 for the power on +RESP:GTRTL

l a
 Bit 15 for the ignition report +RESP:GTIGN and +RESP:GTIGF

t i
 Bit 16 for the ignition on location report +RESP:GTIGL

c
For each bit, set it to 1 to enable corresponding event report, 0 to disable.

e n
 <LED On>: Configure the working mode of power LED and GPS LED.
 0: Each time the device powers on, both LED‟s will work for 30 minutes and then are

u e
turned off deadly.

Q nfid
 1: turn on Power LED and GPS LED if necessary.
 <Info Report Enable>: Enable/disable the device information report function
(+RESP:GTINF). The device information include state of the device, ICCID, GSM signal
strength, adapter connection status, backup battery enable setting, battery voltage, charging
status, Power and GPS LED working mode, GPS on need setting, external GPS antenna

o
status, the last known time of GPS fix, analog input voltage, all digit inputs and outputs status,
time zone information and daylight saving setting..

C
 0: Disable the device information report function.
 1: Enable the device information report function.
 <Info Report Interval>: The interval of reporting the device information.
 <Location By Call>: Configure how to handle the incoming call.
 0: Just hang up the call.
 1: Hang up the call and report the current position (+RESP:GTLBC) to the backend
server.
 2: Hang up the call and report the current position as a google maps hyperlink to
incoming call via SMS.
 <Power Mode>: Terminal power supply mode. There are three cases list below:
 0: The external power supply will charge the internal backup battery on need and
power for unit.
 1: The external power supply will only charge the internal backup battery when
ignition on is detected. The charge process is stopped when ignition off. During

TRACGMT100AN001 – 18 –
GMT00 @Track Air Interface Protocol
charging, the external power supply will power the unit, otherwise the internal
backup battery will supply power for unit.
 2: The external power supply will charge the internal backup battery when ignition on
is detected or when the internal backup battery capacity is less than 30 percent if
ignition is off. During charging, the external power supply will power the unit,
otherwise the internal backup battery will supply power for unit.
 <Agps Mode>: A numeric to indicate whether to enable AGPS. AGPS is helpful to improve
the ratio to get GPS position successfully and reduce the time to get GPS position.
 0: Disable the AGPS function.
 1: Enable the AGPS function.

The acknowledgment message of AT+GTCFG command:

 +ACK:GTCFG,

k
Example:

n l
+ACK:GTCFG,080100,135790246811220,,0003,20090214093254,11F0$

l i a
Parameter Length(byte) Range/Format Default

c t i
XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

e n
Unique ID 15 IMEI

u e
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Q nfid
Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

o
Tail Character 1 $ $

C
TRACGMT100AN001 – 19 –
GMT00 @Track Air Interface Protocol

3.2.5. Digital Output

The AT+GTOUT command is used to output specified wave shape from the digital output ports.
Total three wave shapes is supported as below. If set to wave shape 1, the device will maintain this
wave shape at the specified output port after power reset.
Wave shape 1:
 <Duration> = 0ms, <Toggle Times> = 0

Figure 2: Wave Shape 1

k l
Wave shape 2:

i n
 <Duration> = 500ms, <Toggle Times> = 1

c l t ia
u e e n
Q nfid
Figure 3: Wave Shape 2

Wave shape 3:
 <Duration> = 800ms, <Toggle Times> = 3


C o AT+GTOUT=
Figure 4: Wave Shape 3

Example:
AT+GTOUT=gmt100,1,0,0,0,,,,,,,,,,0004$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

Output1 Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

TRACGMT100AN001 – 20 –
GMT00 @Track Air Interface Protocol

Toggle Times <=3 0 – 255 0

CUT Relay Status 1 0|1 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

k l
Reserved 0

i n
Serial Number 4 0000 – FFFF

l ia
Tail Character 1 $ $

ec n t
<Output1 Status>: Used only for the wave shape 1 as shown in Figure 2 to set the final
status of the output port.

u e
 0: Disable status.
 1: Enable status.

Q nfid
 <Duration>: Please refer to Figure 2, Figure 3 and Figure 4. Unit is 100ms.
 <Toggle Times>: Please refer to Figure 2, Figure 3 and Figure 4.
 <CUT Relay Status>: Used only for the wave shape 1 as shown in Figure 2 to set the final
status of the CUT relay output port.

o
 0: Disable status.
 1: Enable status.

C
The acknowledgment message of AT+GTOUT command:
 +ACK:GTOUT,
Example:
+ACK:GTOUT,080100,135790246811220,,0004,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

TRACGMT100AN001 – 21 –
GMT00 @Track Air Interface Protocol

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 22 –
GMT00 @Track Air Interface Protocol

3.2.6. Digital Input Port Setting

The command AT+GTDIS is used to configure the parameters of 2 digital input ports. Input
<Ignition Detection> is dedicated for ignition detection. The digital input port 1 is customizable. If
the logical status is changed on the digital input port 1, the device will report message
+RESP:GTDIS to the backend server.

 AT+GTDIS=
Example:
AT+GTDIS=gmt100,0,2,,,1,1,4,,,,,,,0005$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
Ignition Detection 1 0 0

n l
Sample Period <=2 0|1 – 12(×2s) 1

l i a
Reserved 0

c t i
Reserved 0

e n
Input ID 1 1 1 1

u e
Enable 1 0|1 0

0 – 20(×10ms)

Q nfid
Debounce Time <=2 0

Reserved 0

Reserved 0

Reserved 0

o
Reserved 0

C
Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $
 <Ignition Detection>: ID of the ignition detection port.
 <Input ID 1>: the digital input port ID.
 <Sample Period>: the sampling period of the non-interruptible input port.
 <Enable>: Enable or disable the interrupt input.
 0: Disable
 1: Enable
 <Debounce Time>: The time for debouncing.

TRACGMT100AN001 – 23 –
GMT00 @Track Air Interface Protocol
The acknowledgment message of AT+GTDIS command:
 +ACK:GTDIS,
Example:
+ACK:GTDIS,080100,135790246811220,,0005,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

k
Count Number 4 0000 – FFFF

i n l
Tail Character 1 $ $

c l t ia
u e e n
Q nfid
C o

TRACGMT100AN001 – 24 –
GMT00 @Track Air Interface Protocol

3.2.7. Input/Output Port Binding

This command is used to configure the user defined output-port action triggered by input ports. If
the IO combination is set and the corresponding condition appears, the device will output specified
wave shape on the specified output port. Otherwise, the device will restore the initial status of the
specified output port. And the device will report message +RESP:GTIOB to the backend server
when the logical status of bound input ports changes.

 AT+GTIOB=
Example:
AT+GTIOB=gmt100,1,3,3,3,1,0,8,3,,,,,0006$
AT+GTIOB=gmt100,1,3,3,3,2,1,,,,,,,0006$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

i n l
IOB ID 1 0–2

l ia
Input Mask 1 0–3 0

c t
Trigger Mask 1 0–3 0

e n
Input Sample Period <=2 0|1 – 12(×2s) 0

u e
Output ID 1 0–2 0

Q nfid
Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

o
Reserved 0

Reserved 0

C
Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <IOB ID>: ID of the user defined IO binding.

 <Input Mask>: Bitwise mask for input ports composition. Each bit, from bit 0 to bit 1,
represents one digital input port. Set to 1 to enable and 0 to disable corresponding input port.
 bit0: ignition detection
 bit1: digital input 1
 <Trigger Mask>: bitwise mask for trigger condition composition of the corresponding input
ports. Each bit, from bit 0 to bit 1, represents the logical status of the corresponding input

TRACGMT100AN001 – 25 –
GMT00 @Track Air Interface Protocol
port to trigger the IOB event. Set to 1 to use enable status as the trigger condition and 0 to use
disable status. Only when the logical status of all the input ports in one IO binding meets the
trigger condition is the IOB event triggered.
 bit0: ignition detection
 bit1: digital input 1
 <Input Sample Period>: The period to check the status of all the digital input ports in one IO
binding. AT+GTIOB and AT+GTDIS use independent sample period to check the input port
status even for the same input port.
 <Output ID>: ID of the output port to output specified wave when the trigger condition meets.
0 means no wave will be output.

Note:
If <Output ID> is set to 2 which is used for CUT relay, only <Output Status> could be used to
define how to output wave shape 1 as shown in Figure 2. In this case <Duration> and <Toggle

k
Times> should be empty. The following settings should keep the same with this note.

l i n ia l
The acknowledgment message of AT+GTIOB command:

t
 +ACK:GTIOB,

c
Example:

e n
+ACK:GTIOB,060100,135790246811220,,1,0006,20090214093254,11F0$

u e
Parameter Length(byte) Range/Format Default

Q nfid
XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

o
IOB ID 1 0–2

C
Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 26 –
GMT00 @Track Air Interface Protocol

3.2.8. External Power Supply Monitoring

The command AT+GTEPS is used to configure the parameters of external power supply
monitoring. The device will measure and monitor the voltage of the external power supply. If the
voltage of the external power supply matches the predefined alarm condition, the device will
report an alarm message +RESP:GTEPS to the backend server to notify the status of the external
power supply.

 AT+GTEPS=
Example:
AT+GTEPS=gmt100,2,250,12000,3,2,1,1,0,0,1,,,,0007$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

n l
Mode 1 0–2 2

l i a
Min Threshold <=5 250 – 28000 mV 9500

c t i
Max Threshold <=5 250 – 28000 mV 15000

e n
Sample Period <=2 0|1 – 12(×2s) 1

0 – 5 (×1s)

u e
Debounce Time 1 1

Output ID 1 0–2 0

Q nfid
Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

o
Sync with FRI 1 0|1 0

C
Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Mode>: Working mode of the external power supply monitoring.

 0: Disable the external power supply monitoring.
 1: Enable the external power supply monitoring. If the current voltage is within the
range of (<Min Threshold>, <Max Threshold>), the +RESP:GTEPS alarm will be
triggered.
 2: Enable the external power supply monitoring. If the current voltage is outside the

TRACGMT100AN001 – 27 –
GMT00 @Track Air Interface Protocol
range of (<Min Threshold>, <Max Threshold>), the +RESP:GTEPS alarm will be
triggered.
 <Min Threshold>: The lower limit to the voltage of the external power supply to trigger the
alarm.
 <Max Threshold>: The upper limit to the voltage of the external power supply to trigger the
alarm.
 <Sample Period>: The sampling period to measure the external power supply.
 <Debounce Time>: The time for debouncing to avoid exceptional voltage drop of the external
power supply.
 <Output ID>: ID of the output port to output specified wave shape when the +RESP:GTEPS
alarm is triggered. If set to 0, no output wave.
 <Sync with FRI>: Besides the +RESP:GTEPS alarm report, the device can also send the
voltage of external power supply periodically along with the fixed report message.
 0: Do not report external power supply voltage with fixed report message.

k
 1: Report external power supply voltage with fixed report message.

l i n ia l
The acknowledgment message of AT+GTEPS command:

t
 +ACK:GTEPS,

c
Example:

e n
+ACK:GTEPS,080100,135790246811220,,0007,20090214093254,11F0$

u e
Parameter Length(byte) Range/Format Default

Q nfid
XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

o
Serial Number 4 0000 – FFFF

C
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 28 –
GMT00 @Track Air Interface Protocol

3.2.9. Analog Input Port Setting

The command AT+GTAIS is used to configure the parameters of analog input port.

 AT+GTAIS=
Example:
AT+GTAIS=gmt100,1,0,250,15000,2,,1,1,0,0,1,,,,,,,0008$

Parameter Length(byte) Range/Format Default

Password 4～6 '0'～'9' 'a'～'z' 'A'～'Z' gmt100

Analog Input ID1 1 1 1

Mode 1 0|1|2 0

k
Min Threshold <=4 250～28000mV

n l
Max Threshold <=4 250～28000mV

l i a
Sample Rate <=2 0|1～12(×2s) 0

c t i
Reserved 0,TBD

e n
Output ID 1 0–2 0

u e
Output Active 1 0|1 0

Duration <=3 0～255(×100ms) 0

Q nfid
Toggle Times <=3 0～255 0

Sync with FRI 1 0|1 0

Reserved 0

o
Reserved 0

C
Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000～FFFF

Tail Character 1 $ $

 <Analog Input ID 1>: The analog input port ID.

 <Mode>: Working mode of the analog input alarm (+RESP :GTAIS).
 0: Disable analog input alarm.
 1: Enable analog input alarm. If the current input voltage is within the range of (<Min
Threshold>, <Max Threshold>), the alarm will be triggered.

TRACGMT100AN001 – 29 –
GMT00 @Track Air Interface Protocol
 2: Enable analog input alarm. If the current input voltage is outside the range of
(<Min Threshold>, <Max Threshold>), the alarm will be triggered.
 <Min Threshold>: The lower limit to the voltage of the analog input port to trigger the
alarm.
 <Max Threshold>: The upper limit to the voltage of the analog input port to trigger the
alarm.
 <Sample Rate>: The sampling period of the analog input port.
 <Output ID>: Specify the ID of the output port to output specified wave shape when the
analog input alarm is triggered. If set to 0, no output wave.
 <Output Active>: set the final status of the output port.
 0: Disable status.
 1: Enable status.
 <Toggle Times>: The times of the square-wave.
 <Sync with FRI>: The device can send the analog input voltage periodically along with fixed

k
report message. Set this field to 1 to enable it, 0 to disable.

l i n ia l
The acknowledgment message of AT+GTAIS command:

t
 +ACK:GTAIS,

c
Example:

e n
+ACK:GTMAI,080100,135790246811220,,0008,20090214093254,11F0$

u e
Parameter Length(byte) Range/Format Default

Q nfid
XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

o
Serial Number 4 0000 – FFFF

C
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 30 –
GMT00 @Track Air Interface Protocol

3.2.10. Fixed Report Information

The command AT+GTFRI is used to configure the parameters of scheduled report

(+RESP:GTFRI).

 AT+GTFRI=
Example:
AT+GTFRI=gmt100,0,,,,,,,,,,,,,,,,,0009$
AT+GTFRI=gmt100,1,1,,1,1000,2300,180,30,,,,,600,,,,,0009$
AT+GTFRI=gmt100,2,1,,1,1000,2300,,,500,,,,,,,,,0009$
AT+GTFRI=gmt100,3,1,,1,1000,2300,,,,1000,,,,,,,,0009$
AT+GTFRI=gmt100,4,1,,1,1000,2300,,60,,300,,,,,,,,0009$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

i n l
Mode 1 0–4 0

l ia
Discard No Fix 2 0|1 1

c t
Reserved 0

e n
Period Enable 1 0|1 1

u e
Start Time 4 HHMM 0000

Q nfid
End Time 4 HHMM 0000

Check Interval <=5 30 – 86400sec 180

Send Interval <=5 5 – 86400sec 30

50 – 65535m

o
Distance <=5 1000

Mileage <=5 50 – 65535m 1000

C
Reserved 0

Corner Report <=3 0 | 40 – 100 0

IGF Report Interval <=5 300-86400sec 600

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 31 –
GMT00 @Track Air Interface Protocol
 <Mode>: The working mode of the fixed report.
 0: Disable this function.
 1: Fixed Timing Report. The positional report message is sent to the backend server
periodically according to the parameter <Send Interval>.
 2: Fixed Distance Report. The positional report message is sent to the backend server
when the straight-line distance between the current GPS position and the last sent
GPS position is greater than or equal to the distance specified by parameter
<Distance>.
 3: Fixed Mileage Report. The positional report message is sent to the backend server
when the path length between the current GPS position and the last sent GPS position
is greater than or equal to the mileage specified by parameter <Mileage>. This
function need connect the vehicle ignition signal to the specified digital input port of
the device.
 4: Optimum Report. Simultaneously observe both time interval and path length

k
between two adjacent reports. Report device position if the calculated time interval

l
per current time against the last report time is greater than the <Send Interval>, and

i n
the length of path between the current position and the last position is greater than the

l ia
<Mileage> setting. This function need connect the vehicle ignition signal to the

c t
specified digital input port of the device.
 <Discard No Fix>: Disable/enable reporting when there is no GPS fixing

e n
 0: Enable reporting
 1: Disable reporting

u e
 <Period Enable>: Disable/enable the time range specified by <Start time> and <End time>. If

Q nfid
the time range is enabled, the position reporting is limited within the time range.
 <Start Time>: The start time of the scheduled fixed report. The valid format is “HHMM”. The
value range of “HH” is “00”–“23”. The value range of “MM” is “00”–“59”.
 <End Time>: The end time of the scheduled fixed report. The valid format and range are
same as <Start Time>.

o
 <Check Interval>: The interval time to fix GPS, its value range is 30 – 86400 and the unit is
second. The parameter is used only when the parameter <GPS On Need> in AT+GTCFG is

C
set to 1.
If <GPS On Need> was set as 1, the device has two modes to operate the GPS module
according to the value of <Check Interval>:
 “Normal mode”: If the <Check Interval> is no less than 60 seconds, the terminal will
close the GPS chip every time after GPS fixing finishes in order to save power.
 “Emergency mode”: If the <Check Interval> is less than 60 seconds, the terminal
will never close the GPS chip unless <Power Saving Enable> is 1 and the state in
+RESP:GTINF is 0x16(Tow) or 0x1A(Fake Tow) or 0x11(Ignition Off Rest) or
0x12(Ignition Off Motion) or 0x41(Sensor Rest). In this mode, the <Send Interval>
will be ignored, the terminal reports every <Check Interval> time, and the <Check
Interval> will be forced to 30 seconds if it is less than 30 seconds.
Due to the limitation of the maximum report message length, it must be assured that: <Send
Interval> / <Check Interval> <= 15.
 <Send Interval>: Period to send the position information. The value range is 5 – 86400 and

TRACGMT100AN001 – 32 –
GMT00 @Track Air Interface Protocol
the unit is second. If <report mode> in AT+GTSRI is set to force on SMS, this should be
greater than 15 seconds.
 <Distance>: the specified distance to send the position information when <Mode> is 2. Unit:
meter.
 <Mileage>: the specified length to send the position information when <Mode> is 3 and 4.
Unit: meter.
 <Corner Report>: The threshold to determine whether the device is turning around a corner.
0 to disable the corner report. For other values, the device will compare the current heading
with the last known corner, if the difference is greater than or equal to this value, send the
corner report with +RESP:GTFRI.
 <IGF Report Interval>: Period to fix and send the position information when <Power
Saving Mode> in AT+GTCFG is set to 2 and the engine is off and if <Mode> is set to 1
(Fixed Timing Report). Its value range is 300 – 86400 and the unit is second.

k l
The acknowledgment message of AT+GTFRI command:

i n
 +ACK:GTFRI,

l ia
Example:

c t
+ACK:GTFRI,080100,135790246811220,,0009,20090214093254,11F0$

e n
Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,

u e
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Q nfid
Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

o
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

C
Tail Character 1 $ $

TRACGMT100AN001 – 33 –
GMT00 @Track Air Interface Protocol

3.2.11. Geo-Fence Information

The command AT+GTGEO is used to configure the parameters of Geo-Fence. (Geo-Fence is a

virtual perimeter on a geographic area using a location-based service, so that when the geofencing
terminal enters or exits the area a notification is generated. The notification can contain
information about the location of the terminal and may be sent to the backend server.)

 AT+GTGEO=
Example:
AT+GTGEO=gmt100,0,3,121.412248,31.187891,1000,600,1,1,0,0,,,,,000A$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
GEO ID 1 0–4

n l
Mode 1 0–3 0

l i a
Longitude <=11 (–)xxx.xxxxxx

c t i
Latitude <=10 (–)xx.xxxxxx

e n
Radius <=7 50 – 6000000m 50

e
0|5 – 86400sec

u
Check Interval <=5 0

0–2

Q nfid
Output ID 1 0

Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

o
Reserved 0

C
Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <GEO ID>: ID of the Geo-Fence. Total five zones, 0 to 4, are supported.

 <Mode>: The working mode of the Geo-Fence to report the message +RESP:GTGEO to the
backend server.
 0: disable the zone‟s Geo-Fence function.
 1: Entering the zone. The report will be generated only when the terminal enters the
Geo-Fence.

TRACGMT100AN001 – 34 –
GMT00 @Track Air Interface Protocol
 2: Exiting the zone. The report will be generated only when the terminal exits from
the Geo-Fence.
 3: Both entering and exiting.
 <Longitude>: The longitude of a point which is defined as the center of the Geo-Fence
circular region. The format is “(–)xxx.xxxxxx” and the value range is from “–180.000000” to
“180.000000”. The unit is degree. West longitude is defined as negative starting with minus
“–” and east longitude is defined as positive without “+”.
 <Latitude>: The latitude of a point which is defined as the centre of the Geo-Fence circular
region. The format is “(–)xx.xxxxxx” and the value range is from “–90.000000” to
“90.000000”. The unit is degree. South Latitude is defined as negative starting with minus
“–” and north Latitude is defined as positive without “+”.
 <Radius>: The radius of the Geo-Fence circular region. The value range is (50 – 6000000)
and the unit is meter.
 <Check Interval>: The interval of GPS checking for the Geo-Fence alarm.

i n k l
The acknowledgment message of AT+GTGEO command:

a
l
 +ACK:GTGEO,

c t i
Example:
+ACK:GTGEO,080100,135790246811220,,0,000A,20090214093254,11F0$

e n
Parameter Length(byte) Range/Format Default

u e
XX0000 – XXFFFF,
Protocol Version 6

Q nfid
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

GEO ID 1 0–4

o
Serial Number 4 0000 – FFFF

C
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 35 –
GMT00 @Track Air Interface Protocol

3.2.12. Tow Alarm Configuration

The AT+GTTOW command is used to configure the motion sensor and the parameters for tow
alarm.

 AT+GTTOW=
Example:
AT+GTTOW=gmt100,1,5,0,120,1,0,5,10,4,10,4,,,,,,,,,000B$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

Tow Enable 1 0|1 0

0 – 900 sec

k
Engine Off to Tow <=2 60

l
Fake Tow Delay <=2 0 – 600 sec 60

i n
0 – 86400 sec

l a
Tow Interval <=5 300

i
0–2

t
Tow Output ID 1 0

c
Tow Output Status 1 0|1 0

e n
Tow Output Duration <=3 0 – 255 (×100ms) 0

u e
Tow Output Toggle Times <=3 0 – 255 0

Q nfid
Rest Duration <=3 1 – 255 (×15sec) 2

Motion Duration <=2 1 – 99 (×100ms) 3

Motion Threshold 1 2–9 2

o
Reserved 0

Reserved 0

C
Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Tow Enable>: Enable or disable tow alarm (+RESP:GTTOW).

TRACGMT100AN001 – 36 –
GMT00 @Track Air Interface Protocol
 0: Disable the tow alarm
 1: Enable the tow alarm
 <Engine Off to Tow>: A time parameter to judge whether the device is considered being
towed after the engine off. If the motion sensor doesn‟t detect stillness within the specified
time after engine off, the device is being towed.
 <Fake Tow Delay>: After engine off and stillness detected, if the motion sensor detects
moving again, the device turns into a state called fake tow. If the device keeps in fake tow
after a period of time defined by the parameter <Fake Tow Delay>, it is considered being
towed.
 <Tow Interval>: The period to send tow alarm message.
 <Tow Output ID>: The ID of the output port to output the specified wave shape when tow
event is detected.
 <Tow Output Status>: Please refer to the parameter <Output1 Status> in the chapter 3.2.5
when <Tow Output ID> is set to 1 and refer to the parameter <CUT Relay Status> in the

k
chapter 3.2.5 when <Tow Output ID> is set to 2.

l
 <Tow Output Duration>: Please refer to the parameter <Duration> in the chapter 3.2.5 when

i n
<Tow Output ID> is set to 1.

l a


i
<Tow Output Toggle Times>: Please refer to the parameter <Toggle Times> in the chapter

c t
3.2.5 when <Tow Output ID> is set to 1.
 <Rest Duration>: A time parameter to make sure that the device enters stillness status, i.e. the

e n
status of the device will be changed to stillness if the motion sensor detects stillness and
maintains for a period of time defined by the parameter <Rest Duration>.

u e
 <Motion Duration>: A time parameter to make sure that the device enters motion status, i.e.

Q nfid
the status of the device will be changed to motion if the motion sensor detects motion and
maintains for a period of time defined by the parameter <Motion Duration>.
 <Motion Threshold>: The threshold for the motion sensor to measure whether the device is
moving.
 <Working Time Enable>: A time parameter to make sure that the device enters motion status,

o
i.e. the status of the device will be changed to motion if the motion sensor detects motion and
maintains for a period of time defined by the parameter <Motion Duration>.

C
 <Motion Threshold>: The threshold for the motion sensor to measure whether the device is
moving.

The acknowledgment message of AT+GTTOW command:

 +ACK:GTTOW,
Example:
+ACK:GTTOW,080100,135790246811220,,000B,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

TRACGMT100AN001 – 37 –
GMT00 @Track Air Interface Protocol

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 38 –
GMT00 @Track Air Interface Protocol

3.2.13. Speed Alarm

This command is used to set a speed-alarm range for the terminal. According to the working mode,
the terminal will report message +RESP:GTSPD to the backend server when its moving speed is
outside or inside of the range.

 AT+GTSPD=
Example:
AT+GTSPD=gmt100,1,80,120,60,300,1,1,0,0,,,,,,,,,,,,000C$
AT+GTSPD=gmt100,2,80,120,60,300,1,1,0,0,,,,,,,,,,,,000C$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
Mode 1 0–3 0

n l
Min Speed <=3 0 – 400km/h 0

l i a
Max Speed <=3 0 – 400km/h 0

c t i
Duration <=4 15 – 3600sec 60

e n
Send Interval <=4 30 – 3600sec 300

e
0–2

u
Output ID 1 0

Q nfid
Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

Reserved 0

o
Reserved 0

C
Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

TRACGMT100AN001 – 39 –
GMT00 @Track Air Interface Protocol

Tail Character 1 $ $

 <Mode>: The working mode of the speed alarm.

 0: Disable speed alarm.
 1: Report speed alarm if the current speed is within the speed range defined by <Min
Speed> and <Max Speed>.
 2: Report speed alarm if the current speed is outside the speed range defined by <Min
Speed> and <Max Speed>.
 3: Report speed alarm only one time if the current speed is within or outside the speed
range defined by <Min Speed> and <Max Speed>. In this mode, <Send Interval>
will be ignored.
 <Min Speed>: The lower limit speed.
 <Max Speed>: The upper limit speed.


k
<Duration>: If the speed meets the alarm condition and maintains a period of time defined by
<Duration>, the speed alarm will be triggered.

n l
 <Send Interval>: The interval time of sending speed alarm message.

c l i t ia
The acknowledgment message of AT+GTSPD command:
 +ACK:GTSPD,

e n
Example:

u e
+ACK:GTSPD,080100,135790246811220,,000C,20090214093254,11F0$

Q nfid
Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID 15 IMEI

o
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

C
Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 40 –
GMT00 @Track Air Interface Protocol

3.2.14. SOS Function

This command is used to configure the specified input port for emergency. When an emergency
occurs, the end user can use this input port to trigger reporting current position as a google maps
hyperlink to <SOS Number> via SMS and report position message +RESP:GTSOS to the
backend server. A specified wave shape can be configured to output on specified output port.

 AT+GTSOS=
Example:
AT+GTSOS=gmt100,1,1,+8613812341234,1,1,0,0,,,,,000D$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
Mode 1 0–2 0

n l
Digital Input ID 1 0|1 0

l i a
SOS Number <=20

c t i
Output ID 1 0–2 0

e n
Output Status 1 0|1 0

e
0 – 255(×100ms)

u
Duration <=3 0

0 – 255

Q nfid
Toggle Times <=3 0

Reserved 0

Reserved 0

Reserved 0

o
Reserved 0

C
Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Mode>: The working mode of SOS function.

 0: Disable SOS function.
 1: Send the current position to the backend server only.
 2: Send the current position as a google maps hyperlink to the <SOS Number> via
SMS.
 <Digital Input ID>: ID of the digital input port which triggers the SOS function. 0 means the
SOS function is disabled. The corresponding digital input port should be configured by the
command AT+GTDIS first. If configured to trigger the SOS function, there is no
+RESP:GTDIS report message for the specified digital input port.
 <SOS number>: the emergency phone number.

TRACGMT100AN001 – 41 –
GMT00 @Track Air Interface Protocol

The acknowledgment message of AT+GTSOS command:

 +ACK:GTSOS,
Example:
+ACK:GTSOS,080100,135790246811220,,000D,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

k
Send Time 14 YYYYMMDDHHMMSS

n l
Count Number 4 0000 – FFFF

l i a
Tail Character 1 $ $

ec n t i
u
Q nfid e
C o

TRACGMT100AN001 – 42 –
GMT00 @Track Air Interface Protocol

3.2.15. Excessive Idling Detection

The command AT+GTIDL is used to detect the engine excessive idling (stationary while ignition
on). To use this command, the ignition signal must be connected to the device. When the device
detects that the vehicle is entering into the idle status, it will report event message
+RESP:GTIDN to the backend server. When the vehicle leaves the idle status, the device will
report event message +RESP:GTIDF to the backend server.

 AT+GTIDL=
Example:
AT+GTIDL=gmt100,1,2,1,,,,,1,1,0,0,,,,,000E$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k l
Mode 1 0|1 0

i n
Time to Stationary 1 1 – 5 min 2

l ia
Time to Movement 1 1 – 5 min 1

c t
Reserved 0

e n
Reserved 0

u e
Reserved 0

Q nfid
Reserved 0

Output ID 1 0–2 0

Output Status 1 0|1 0

o
Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

C
Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Mode>: Working mode.

 0: Disable this function
 1: Enable this function.
 <Time to Stationary>: If the vehicle is detected to be stationary with ignition on for this time

TRACGMT100AN001 – 43 –
GMT00 @Track Air Interface Protocol
long, it is considered to be in idling status.
 <Time to Movement>: After the vehicle enters into idling status, if it moves again or turns
ignition off and keeps in that status for this time long, the vehicle is considered to leave idling
status.

The acknowledgment message of AT+GTIDL command:

 +ACK:GTIDL,
Example:
+ACK:GTIDL,080100,135790246811220,,000E,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

k
Unique ID 15 IMEI

i n l
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

l ia
Serial Number 4 0000 – FFFF

c t
Send Time 14 YYYYMMDDHHMMSS

e n
Count Number 4 0000 – FFFF

u e
Tail Character 1 $ $

Q nfid
C o

TRACGMT100AN001 – 44 –
GMT00 @Track Air Interface Protocol

3.2.16. Harsh Behavior Monitoring

The command AT+GTHBM is used to monitor the harsh behavior of drive with GPS. Two harsh
behaviors are monitored, the harsh braking and the harsh acceleration. According the speed read
from GPS, 3 levels of speed are defined including high speed, medium speed and low speed. For
each speed level, 2 thresholds of speed change are defined to determine the harsh braking and
harsh acceleration. If the change of speed within 5 seconds are greater than the corresponding
threshold, the device will report +RESP:GTHBM message to the backend server to indicate the
harsh behavior. The same harsh behavior within 30 seconds only reports once. For this function to
work, the <GPS on Need> in AT+GTCFG must set to 0.

 AT+GTHBM=
Example:

k
AT+GTHBM=gmt100,1,,,100,21,6,,60,21,6,,,21,15,,1,1,8,3,,,,,000F$

n l
Parameter Length(byte) Range/Format Default

l i a
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

c t i
Enable 1 0|1 0

n
Reserved 0

e
Reserved 0

u e
High Speed <=3 100 – 400km/h 100

Q nfid
∆Vhb <=3 0 – 100km/h 0

∆Vha <=3 0 – 100km/h 0

Reserved 0

o
Medium Speed <=3 60 – 100km/h 60

∆Vmb <=3 0 – 100km/h 0

C
∆Vma <=3 0 – 100/km/h 0

Reserved 0

Reserved 0

∆Vlb <=3 0 – 100/km/h 0

∆Vla <=3 0 – 100/km/h 0

Reserved 0

Output ID 1 0–2 0

Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

TRACGMT100AN001 – 45 –
GMT00 @Track Air Interface Protocol

Toggle Times <=3 0 – 255 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Enable>: Enable or disable this function.

 0: Disable this function
 1: Enable this function

k
 <High Speed>, <Medium Speed>: If the last known speed of the device read from GPS is

n l
greater or equal to <High Speed>, the vehicle that the device is attached to is considered to be

i
high speed. If the last known speed is less than <High Speed> while greater or equal to

l ia
<Medium Speed>, the vehicle is considered to be medium speed. If the last known speed is

c t
less than <Medium Speed>, the vehicle is considered to be low speed.
 <∆Vhb>: The threshold for harsh braking in high speed level. If within 5 seconds, the current

e n
speed is less than the last known speed and the change of the speed is greater than or equal to

e
this value, a harsh braking is detected in high speed level. If set to 0, do not monitor harsh

u
braking behavior in high speed level.

Q nfid
 <∆Vha>: The threshold for harsh acceleration in high speed level. If within 5 seconds, the
current speed is greater than the last known speed and the change of the speed is greater than
or equal to this value, a harsh acceleration is detected in high speed level. If set to 0, do not
monitor harsh acceleration behavior in high speed level.
 <∆Vmb>: The threshold for harsh braking in medium speed level. If within 5 seconds, the

o
current speed is less than the last known speed and the change of the speed is greater than or
equal to this value, a harsh braking is detected in medium speed level. If set to 0, do not

C
monitor harsh braking behavior in medium speed level.
 <∆Vma>: The threshold for harsh acceleration in medium speed level. If within 5 seconds,
the current speed is greater than the last known speed and the change of the speed is greater
than or equal to this value, a harsh acceleration is detected in medium speed level. If set to 0,
do not monitor harsh acceleration behavior in medium speed level.
 <∆Vlb>: The threshold for harsh braking in low speed level. If within 5 seconds, the current
speed is less than the last known speed and the change of the speed is greater than or equal to
this value, a harsh braking is detected in low speed level. If set to 0, do not monitor harsh
braking behavior in low speed level.
 <∆Vla>: The threshold for harsh acceleration in low speed level. If within 5 seconds, the
current speed is greater than the last known speed and the change of the speed is greater than
or equal to this value, a harsh acceleration is detected in low speed level. If set to 0, do not
monitor harsh acceleration behavior in low speed level.

TRACGMT100AN001 – 46 –
GMT00 @Track Air Interface Protocol

The acknowledgment message of AT+GTHBM command:

 +ACK:GTHBM,
Example:
+ACK:GTHBM,080100,135790246811220,,000F,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

k
Send Time 14 YYYYMMDDHHMMSS

n l
Count Number 4 0000 – FFFF

l i a
Tail Character 1 $ $

ec n t i
u
Q nfid e
C o

TRACGMT100AN001 – 47 –
GMT00 @Track Air Interface Protocol

3.2.17. Time Adjustment

The command AT+GTTMA is used to adjust the local time of the device remotely. Upon this
command, the device will set the time zone and daylight saving accordingly. Then it will use the
given UTC time to adjust the local time based on the time zone and daylight saving setting.
This command will also trigger the device to start GPS. After a successful GPS fix, the device
will update the local time with the GPS UTC time again.

 AT+GTTMA=
Example:
AT+GTTMA=gmt100,-,3,30,0,20090917203500,,,,,0010$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

l
Sign 1 +|– +

i n a
0 – 23

l
Hour Offset <=2 0

t i
0 – 59

c
Minute Offset <=2 0

Daylight Saving 1 0|1 0

e n
UTC Time 14 YYYYMMDDHHMMSS

u e
Reserved 0

Q nfid
Reserved 0

Reserved 0

Reserved 0

o
Serial Number 4 0000 – FFFF

Tail Character 1 $ $




C <Sign>: Indicate the positive or negative of the local time offset to UTC
<Hour Offset>: UTC offset in hours
<Minute Offset>: UTC offset in minutes
<Daylight Saving>: Enable/disable daylight saving time.
 0: Disable daylight saving
 1: Enable daylight saving
 <UTC time>: UTC time to adjust the local time..

The acknowledgment message of AT+GTTMA command:

 +ACK:GTTMA,
Example:

TRACGMT100AN001 – 48 –
GMT00 @Track Air Interface Protocol

+ACK:GTTMA,080100,135790246811220,,00010,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 49 –
GMT00 @Track Air Interface Protocol

3.2.18. Outside Working Hours

To protect the privacy of the driver when they are off duty, the device could be configured to
report empty location information during the outside working hours. The command AT+GTOWH
is used to define the working hours and the working mode to protect the privacy. When this
function is enabled, the device will report empty latitude, empty longitude, empty LAC and empty
Cell ID in all the report messages except for +RESP:GTSOS and +RESP:GTSOA.

 AT+GTOWH=
Example:
AT+GTOWH=gmt100,1,1F,0900,1200,1300,1730,,,,1,1,0,0,,,,,0011$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

l
Mode 1 0–1 0

i n a
0 – 7F

l
Day of Work <=2 1F

c t i
Working Hours Start1 4 HHMM 0900

Working Hours End1 4 HHMM 1200

e n
Working Hours Start2 4 HHMM 1300

u e
Working Hours End2 4 HHMM 1800

Q nfid
Reserved 0

Reserved 0

Reserved 0

o
Output ID 1 0–2 0

Output Status 1 0|1 0

C
Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $
 <Mode>: Working mode.
 0: Disable this function.

TRACGMT100AN001 – 50 –
GMT00 @Track Air Interface Protocol
 1: Automatic mode. Under this mode, the device will ignore the status of the digital
input. It will automatically check the current time against the working hours arrange.
If outside the working hours, hide the location information. Otherwise report
normally.
 <Day of Work>: Specify the working days in a week in a bitwise manner.
 Bit 0 for Monday
 Bit 1 for Tuesday
 Bit 2 for Wednesday
 Bit 3 for Thursday
 Bit 4 for Friday
 Bit 5 for Saturday
 Bit 6 for Sunday
For each bit, 0 means off day, 1 means working day.
 <Working Hours Start1>, <Working Hours End1>: The first period of the working hours in a

k
day.

l
 <Working Hours Start2>, <Working Hours End2>: The second period of the working hours in

i n
a day.

c l t ia
The acknowledgment message of AT+GTOWH command:

e n
 +ACK:GTOWH,

u e
Example:
+ACK:GTOWH,080100,135790246811220,,0011,20090214093254,11F0$

Q nfid
Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

o
Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

C
Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

TRACGMT100AN001 – 51 –
GMT00 @Track Air Interface Protocol

3.2.19. Protocol Watchdog

The AT+GTDOG command is used to reboot the device in a time based manner or upon ignition.
This helps the device avoid working in an exceptional status for a long time. Besides these two
automatically reboot method, the device also supports to use the digital input to trigger the reboot
manually.

 AT+GTDOG=
Example:
AT+GTDOG=gmt100,1,,1,0130,,1,1,,,,,0012$
AT+GTDOG=gmt100,2,30,,,,1,1,,,,,0012$

Parameter Length(byte) Range/Format Default

k
Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

l
Mode 1 0–2 0

i n a
10 – 120 min

l
Ignition Frequency <=3 60

t i
1 – 30 day

c
Interval <=2 30

Time 4 HHMM 0200

e n
Reserved 0

u e
Report Before Reboot 1 0|1 1

Q nfid
Input ID 1 0|1 0

Reserved 0

Reserved 0

o
Reserved 0

Reserved 0

C
Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Mode>: Working mode.

 0: Disable this function
 1: Reboot periodically according to the <Interval> and <Time> setting.
 2: Reboot when ignition on.
 <Ignition Frequency>: When the working mode is 2, if the time interval between two
adjacent ignitions is greater than the specified value, the device will automatically reboot
upon ignition on.
 <Interval>: The interval to reboot the device in day.
 <Time>: At what time to perform the reboot operation when <Interval> is met.
 <Report Before Reboot>: Whether to report the +RESP:GTDOG message before reboot. 0

TRACGMT100AN001 – 52 –
GMT00 @Track Air Interface Protocol
means no report, 1 to report. If this is enabled, the device will make a real-time location
before sending the message in order to send it with the current location information.
 <Input ID>: ID of the digital input port which is used to trigger the manually reboot. 0 means
do not use manual reboot. Only port 1 is supported.

The acknowledgment message of AT+GTDOG command:

 +ACK:GTDOG,
Example:
+ACK:GTDOG,080100,135790246811220,,0012,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

k
Unique ID 15 IMEI

i n l
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

l ia
Serial Number 4 0000 – FFFF

c t
Send Time 14 YYYYMMDDHHMMSS

e n
Count Number 4 0000 – FFFF

u e
Tail Character 1 $ $

Q nfid
C o

TRACGMT100AN001 – 53 –
GMT00 @Track Air Interface Protocol

3.2.20. Auto-unlock PIN

The command AT+GTPIN is used to configure the auto-unlock PIN function of the device.
Some operators offer SIM card with PIN code protection by default. To make the device work
with the PIN-protected SIM card, use this command to let the device auto-unlock the SIM PIN
with the pre-set PIN code.

 AT+GTPIN=
Example:
AT+GTPIN=gmt100,1,0000,,,,,,0013$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
Enable Auto-unlock PIN 1 0|1 1

n l
PIN 4–8 '0' – '9'

l i a
Reserved 0

c t i
Reserved 0

e n
Reserved 0

u e
Reserved 0

Q nfid
Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

o
 <Enable Auto-unlock PIN>: 1 to enable the auto-unlock PIN function, 0 to disable.
 <PIN>: Code used to unlock the SIM PIN.

C
The acknowledgment message of AT+GTPIN command:
 +ACK:GTPIN,
Example:
+ACK:GTPIN,080100,135790246811220,,0013,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{„A‟ – „Z‟,‟0‟ – „9‟}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

TRACGMT100AN001 – 54 –
GMT00 @Track Air Interface Protocol

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 55 –
GMT00 @Track Air Interface Protocol

3.2.21. Real Time Operation

The command AT+GTRTO is used to retrieve information from the terminal or control the
terminal to execute certain actions.

 AT+GTRTO=
Example:
AT+GTRTO=gmt100,A,,,,,,0014$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

Sub Command 1 0–C

k
Reserved 0

l
Reserved 0

l i n a
Reserved 0

t i
Reserved 0

c
Reserved 0

e n
Serial Number 4 0000 – FFFF

u e
Tail Character 1 $ $

Q nfid
 <Sub Command>: Valid value is 0–9, A, B, C.
 0: GPS. Get the GPS related information via message +RESP:GTGPS.
 1: RTL. Request the terminal to report its current position immediately via message
+RESP:GTRTL.

o
 2: READ. Get the current configuration of the terminal via message
+RESP:GTALL.

C
 3: REBOOT. Reboot the terminal.
 4: RESET. Reset all parameters to factory setting. Parameters configured by
AT+GTBSI and AT+GTSRI will not be reset.
 5: PWROFF. Power off the device.
 6: CID. Get the ICCID of the SIM card which is being used by the terminal via
message +RESP:GTCID.
 7: CSQ. Get the current GSM signal level of the terminal via message
+RESP:GTCSQ.
 8: VER. Get the version information of the device via message +RESP:GTVER.
 9: BAT. Get the battery level and adapter status of the terminal via message
+RESP:GTBAT.
 A: IOS. Get status of all the IO ports via message +RESP:GTIOS.
 B: TMZ. Get the time zone settings via message +RESP:GTTMZ.
 C: GIR. Get cell information via message +RESP:GTGSM.

TRACGMT100AN001 – 56 –
GMT00 @Track Air Interface Protocol

The acknowledgment message of AT+GTRTO command:

 +ACK:GTRTO,
Example:
+ACK:GTRTO,080100,135790246811220,,IOS,0014,20090214093254,11F1$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

k
Sub Command <=6 Sub command string

l
Serial Number 4 0000 – FFFF

i n a
Send Time 14 YYYYMMDDHHMMSS

l i
0000 – FFFF

t
Count Number 4

c
Tail Character 1 $ $

e n
 <Sub Command>: A string to indicate the sub command of AT+GTRTO.

u
Q nfid e
C o

TRACGMT100AN001 – 57 –
GMT00 @Track Air Interface Protocol

3.2.22. Ignition Time Counter

The command AT+GTHMC is used to measure time of use with each actuation of the ignition on.
To use this command, the ignition signal must be connected to the device. When the device sends
+RESP:GTFRI and +RESP:GTIGN and +RESP:GTIGF, <Ignition Time Count> will be sent
in these reports.

 AT+GTHMC=
Example:
AT+GTHMC=gmt100,1,12345:12:34,,,,,,,,,0015$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

k
Ignition Time Counter
1 0|1 0

l
Enable

i n
Initial Ignition Time Count 11 00000:00:00-99999:00:00 00000:00:00

l ia
Reserved 0

c t
Reserved 0

e n
Reserved 0

u e
Reserved 0

Q nfid
Reserved 0

Reserved 0

Reserved 0

o
Reserved 0

Serial Number 4 0000 – FFFF

C
Tail Character 1 $ $

 <Ignition Time Counter Enable>: Enable or disable ignition time counter function. If ignition
time counter function is enabled, ignition time count will be increased when the device is in
ignition.
 0: Disable ignition time counter function
 1: Enable ignition time counter function
 <Initial Ignition Time Count>: Initial ignition time count. It is formatted with 5 hour digits
and 2 minute digits and 2 second digits and ranges from 00000:00:00– 99999:00:00. When
engine is on at the first time, <Ignition Time Count> which report in +RESP:GTFRI
/+RESP:GTIGN/+RESP:GTIGF will be increased based on this value.

TRACGMT100AN001 – 58 –
GMT00 @Track Air Interface Protocol
The acknowledgment message of AT+GTHMC command:
 +ACK:GTHMC,
Example:
+ACK:GTHMC,080100,135790246811220,,0015,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

k
Count Number 4 0000 – FFFF

i n l
Tail Character 1 $ $

c l t ia
u e e n
Q nfid
C o

TRACGMT100AN001 – 59 –
GMT00 @Track Air Interface Protocol

3.2.23. Jamming Detection

The command AT+GTJDC is used to configure the parameter for jamming detection. When the
detection condition is matched, the device will report +RESP:GTJDR event message to the
backend server.

 AT+GTJDC=
Example:
AT+GTJDC=gmt100,1,10,40,,,,,1,1,15,5,,0016$

Parameter Length(byte) Range/Format Default

Password 4–6 '0' – '9' 'a' – 'z' 'A' – 'Z' gmt100

Mode 1 0|1 0

k
Signal Threshold <=3 0 – 255 10

i n l
C1 Threshold <=3 0 – 255 40

l ia
Reserved 0

c t
Reserved 0

e n
Reserved 0

u e
Reserved 0

Q nfid
Output ID 1 0–2 0

Output Status 1 0|1

Duration <=3 0～255(×100ms) 0

0 – 255

o
Toggle Times <=3 0

Reserved 0

C
Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Mode>: Working mode.

 0: Disable this function.
 1: Enable this function.
 <Signal Threshold>, <C1 Threshold>: The built-in jamming detection algorithm uses these
two parameters to judge whether the device is currently being jammed. The smaller the
parameter, the more sensitive.

The acknowledgment message of AT+GTJDC command:

 +ACK:GTJDC,

TRACGMT100AN001 – 60 –
GMT00 @Track Air Interface Protocol

Example:
+ACK:GTJDC,080100,135790246811220,,0016,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z', '0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Serial Number 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

k
Tail Character 1 $ $

l i n ia l
ec n t
u
Q nfid e
C o

TRACGMT100AN001 – 61 –
GMT00 @Track Air Interface Protocol

3.3. Report

This section defines the formats of the report messages. Due to the max length of SMS message
(160 bytes), it is recommended to carefully set the <Report Composition Mask> in AT+GTCFG
to limit the length of the report which contains GPS position information if you choose SMS as
the transmit method. Otherwise the report will be truncated to fit the length of SMS message.

3.3.1. Position Related Report

 +RESP:GTTOW,
If the tow alarm is enabled by the command AT+GTTOW, the device will send the message
+RESP:GTTOW to the backend server when the motion sensor detects tow.

k l
 +RESP:GTDIS,

i n
If the status of digital inputs are detected being changed, the device will send the message

l ia
+RESP:GTDIS to the backend server.

c t
 +RESP:GTIOB,

e n
If the IO combination is set and the corresponding condition appears, the device will report the

e
message +RESP:GTIOB to the backend server.

u
Q nfid
 +RESP:GTGEO,
If Geo-Fence is configured and enabled, the device will send the message +RESP:GTGEO to
the backend server according to settings when the device enters or exits the Geo-Fence.

 +RESP:GTSPD,

o
If the speed alarm is enabled, the device will send the message +RESP:GTSPD to the backend
server when the speed of the device is detected into the alarm range,.

C
 +RESP:GTSOS,
If the SOS mode is set to 1, the device will send the message +RESP:GTSOS to the backend
server when the corresponding digital input port triggers SOS.

 +RESP:GTRTL,
After the device receives the command AT+GTRTO, it will start GPS to get the current position
and then send the message +RESP:GTRTL to the backend server.

 +RESP:GTDOG,
The protocol watchdog reboot message.

 +RESP:GTIGL,
The protocol ignition on location message.

TRACGMT100AN001 – 62 –
GMT00 @Track Air Interface Protocol

 +RESP:GTHBM,
If harsh behavior is detected, this message will be sent to the backend server.

All of the above report messages have the same format as shown below.
Example:
+RESP:GTTOW,080100,135790246811220,,,10,1,1,4.3,92,70.0,121.354335,31.222073,200902
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTDIS,080100,135790246811220,,,10,1,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTIOB,060100,135790246811220,,,10,1,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

n k l
+RESP:GTGEO,080100,135790246811220,,,00,1,1,4.3,92,70.0,121.354335,31.222073,200902

i
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

c l t ia
+RESP:GTSPD,080100,135790246811220,,,00,1,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

u e e n
+RESP:GTSOS,080100,135790246811220,,,10,1,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

Q nfid
+RESP:GTRTL,080100,135790246811220,,,00,1,1,4.3,92,70.0,121.354335,31.222073,200902
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTDOG,080100,135790246811220,,,01,1,1,4.3,92,70.0,121.354335,31.222073,200902

o
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

C
+RESP:GTDOG,080100,135790246811220,,,13,1,1,4.3,92,70.0,121.354335,31.222073,200902
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTIGL,080100,135790246811220,,,00,1,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTHBM,080100,135790246811220,,,10,1,1,4.3,92,70.0,121.354335,31.222073,200902
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTHBM,080100,135790246811220,,,11,1,1,24.3,92,70.0,121.354335,31.222073,20090
214013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

Protocol Version 6 XX0000 – XXFFFF,

TRACGMT100AN001 – 63 –
GMT00 @Track Air Interface Protocol

X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Reserved

Report ID/Report Type 2 X(0-4)X(0-3)

Number 1 0–1

GPS Accuracy <=2 0|1 – 50

Speed <=5 0.0 – 999.9 km /h

Azimuth <=3 0 – 359

Altitude <=8 (–)xxxxx.x m

k l
Longitude <=11 (–)xxx.xxxxxx

i n
Latitude <=10 (–)xx.xxxxxx

l ia
GPS UTC Time 14 YYYYMMDDHHMMSS

c t
MCC 4 0XXX

e n
MNC 4 0XXX

u e
LAC 4 XXXX

Q nfid
Cell ID 4 XXXX

Reserved 2 00

Mileage <=9 0.0 – 4294967.0 km

o
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

C
Tail Character 1 $ $

 <Report ID/Report Type>: The report ID and the type of the report type in hex format. 4 high
bits mean report ID and 4 low bits means report type.
Report ID has different meanings in different messages as below.
 The ID of digital input port which triggers the report message +RESP:GTDIS and
+RESP:GTSOS. The value is 1.
 The ID of the bound IO which triggers the report message +RESP:GTIOB. The range
is 0 – 3.
 The ID of Geo-Fence in the report message +RESP:GTGEO. The range is 0 – 4.
 The ID of the digital input port which triggers the reboot message +RESP:GTDOG.
The valid value is 1 .
 The speed level of which the harsh behavior is detected in message +RESP:GTHBM. 3

TRACGMT100AN001 – 64 –
GMT00 @Track Air Interface Protocol
is high speed, 2 is medium speed and 1 is low speed.
For the rest of the messages, it will always be 0.

Report type has different meanings in different messages as below.

 In the +RESP:GTDIS report message generated by the digital input
0: The current logical status of the input port is disable status.
1: The current logical status of the input is enable status.
 In the +RESP:GTIOB report message generated by bound IO
0: The current logical status of the bound IO does not meet the alarm condition.
1: The current logical status of the bound IO meets the alarm condition.
 In Geo-Fence report message +RESP:GTGEO
0: Exit from the Geo-Fence.
1: Enter the Geo-Fence.
 In the message of speed alarm +RESP:GTSPD

k
0: Outside of the predefined speed range.

l
1: Inside of the predefined speed range.

i n
 In the message of protocol watch dog reboot message +RESP:GTDOG

l ia
1: Reboot message for time based working mode

c t
2: Reboot message for ignition on working mode
3: Reboot message for input triggered reboot

e n
 In the message of harsh behavior monitoring message +RESP:GTHBM
0: Harsh braking behavior

u e
1: Harsh acceleration behavior

Q nfid
For the rest of the messages, it will always be 0.
 <Number>: The number of the GPS position included in the report message. Generally, it
equals to 1.
 <GPS Accuracy>: The HDOP defined in NMEA0183 (The National Marine Electronics
Association (NMEA) is a non-profit association of manufacturers, distributors, dealers,

o
educational institutions, and others interested in peripheral marine electronics occupations.
The NMEA 0183 standard defines an electrical interface and data protocol for

C
communications between marine instrumentation.). The range of value is 0 – 50. Here 0
means no GPS fix.
 <Speed>: The current speed. Unit: km/h
 <Azimuth>: The azimuth of the GPS fixing.
 <Altitude>: The height above the sea level.
 <Longitude>: The longitude of the current position.
 <Latitude>: The latitude of the current position.
 <GPS UTC Time>: The UTC time from the GPS chip.
 <MCC>: Mobile country code. It is 3 digits in length and ranges from 000–999.
 <MNC>: Mobile network code. It is 3 digits in length and ranges from 000–999.
 <LAC>: Location area code in hex format.
 <Cell ID>: Cell ID in hex format.
 <Mileage>: The current total mileage.

TRACGMT100AN001 – 65 –
GMT00 @Track Air Interface Protocol
 +RESP:GTFRI,
If fixed report is enabled, the device will send the message +RESP:GTFRI to the backend server
according to the working mode.

Example:
+RESP:GTFRI,080100,135790246811220,,,10,1,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,12345:12:34,,80,,,,,,20090214093254,11F0$

+RESP:GTFRI,080100,135790246811220,,,10,2,1,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,0,4.3,92,70.0,121.354335,31.222073,20090101000000,0460,0
000,18d8,6141,00,2000.0,12345:12:34,,80,,,,,,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,

k
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

n l
Unique ID 15 IMEI

l i a
'0' – '9' 'a' – 'z' 'A' – 'Z'

i
Device Name <=10

c t
External Power Supply <=5 0 – 28000 mV

e n
Report ID/Report Type 2 X(1-4)X(0-1)

u e
Number <=2 0 – 15

0|1 – 50

Q nfid
GPS Accuracy <=2

Speed <=5 0.0 – 999.9 km /h

Azimuth <=3 0 – 359

Altitude <=8 (–)xxxxx.x m

o
Longitude <=11 (–)xxx.xxxxxx

C
Latitude <=10 (–)xx.xxxxxx

GPS UTC Time 14 YYYYMMDDHHMMSS

MCC 4 0XXX

MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

Reserved 2 00

Mileage <=9 0.0 – 4294967.0 km

Ignition Time Count 11 HHHHH:MM:SS

Analog Input 1 <=4 250～28000 mV

TRACGMT100AN001 – 66 –
GMT00 @Track Air Interface Protocol

Reserved

Backup Battery
<=3 0 – 100
Percentage

Reserved

Reserved

Reserved

Reserved

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

k
 <External Power Supply>: The voltage of the external power supply. If using command

l
AT+GTEPS to set the device report the external power supply voltage periodically with

i n
fixed report, the device will send the current voltage along with +RESP:GTFRI message to

l ia
the backend server. If not set, this field will be empty.

c t
 <Report ID/Report Type>: Indicate the working mode of the fixed report and the type of the
message.

e n
Report ID has four meanings as below.
 1: fixed timing report.

u e
 2: fixed distance report.

Q nfid
 3: fixed mileage report.
 4: fixed timing and mileage report.
Report type has two meanings as below.
 0: the normal fixed report.
 1: corner report which indicates that the device just turns around a corner.

o
 <Number>: The number of the GPS position included in the report message. In the message
+RESP:GTFRI, it probably includes one or several GPS position according to the setting of

C
<Send Interval> and <Check Interval>. If multi-position in one +RESP:GTFRI message, the
green part repeats.
 <Ignition Time Count>: If ignition time counter function is enabled by the command
AT+GTHMC, total ignition time counted when engine is on will be reported in this field. It
is formatted with 5 hour digits and 2 minute digits and 2 second digits and ranges from
00000:00:00– 99999:00:00. If the function is disabled, this field will be reserved.
 <Analog1 Input 1>: The voltage of the analog input 1. If using command AT+GTAIS to set
the device report the analog input 1 periodically with fixed report, the device will send the
current voltage of the analog input 1 along with +RESP:GTFRI message to the backend
server. If not set, this field will be empty.
 <Backup Battery Percentage>: The current volume of the backup battery in percentage.

 +RESP:GTEPS,
If the external power supply monitoring is enabled by the command AT+GTEPS, the device will

TRACGMT100AN001 – 67 –
GMT00 @Track Air Interface Protocol
send the message +RESP:GTEPS to the backend server when the voltage of the external power
supply enters the alarm range.

 +RESP:GTAIS,
If the analog input alarm is enabled by the command AT+GTAIS, the device will send the
message +RESP:GTAIS to the backend server when analog input voltage enters the alarm range.

Example:
+RESP:GTEPS,080100,135790246811220,,13500,00,1,1,4.3,92,70.0,121.354335,31.222073,20
090214013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

+RESP:GTAIS,080100,135790246811220,,19800,11,1,1,4.3,92,70.0,121.354335,31.222073,20
090214013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

k
Parameter Length(byte) Range/Format Default

l
XX0000 – XXFFFF,

n
Protocol Version 6

i
X∈{'A' – 'Z','0' – '9'}

l ia
Unique ID 15 IMEI

c t
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

e n
Analog Input VCC <=5 0 – 28000 mV

u e
Report ID/Report Type 2 X(0-1)X(0-1)

Q nfid
Number <=2 0–1

GPS Accuracy <=2 0|1 – 50

Speed <=5 0.0 – 999.9 km /h

o
Azimuth <=3 0 – 359

Altitude <=8 (–)xxxxx.x m

C
Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

GPS UTC Time 14 YYYYMMDDHHMMSS

MCC 4 0XXX

MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

Reserved 2 00

Mileage <=9 0.0 – 4294967.0 km

TRACGMT100AN001 – 68 –
GMT00 @Track Air Interface Protocol

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 < Analog Input VCC>: The value of the analog input voltage. When the voltage of the analog
input meets the alarm condition as set by command AT+GTEPS or AT+GTAIS, the device
will send the current analog input voltage with +RESP:GTEPS or +RESP:GTAIS message
to the backend server.
 <Report ID/Report Type>: The report ID and the type of the report type in hex format. 4 high
bits mean report ID and 4 low bits means report type.
Report ID has different meanings in these two messages.
 The ID of analog input port which triggers report message +RESP:GTEPS. The value
is 0.

k
 The ID of analog input port which triggers report message +RESP:GTAIS. The range

n l
is 1.

i a
Report type has two meanings as below.

l i
 0: Outside of the predefined range.

c t
 1: Inside of the predefined range.
 <Number>: The number of the GPS position included in the report message. Generally, it

e n
equals to 1.

u
Q nfid e
 +RESP:GTLBC,
If the parameter <Location By Call> is set to 1 by the command AT+GTCFG, the device will get
and send the current position to the backend server by the message +RESP:GTLBC when there
is an incoming call.

o
Example:
+RESP:GTLBC,080100,135790246811220,,+8613800000000,1,4.3,92,70.0,121.354335,31.222

C
073,20090214013254,0460,0000,18d8,6141,00,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Call Number <=20 phone number

GPS Accuracy <=2 0|1 – 50

Speed <=5 0.0 – 999.9 km /h

Azimuth <=3 0 – 359

TRACGMT100AN001 – 69 –
GMT00 @Track Air Interface Protocol

Altitude <=8 (–)xxxxx.x m

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

GPS UTC Time 14 YYYYMMDDHHMMSS

MCC 4 0XXX

MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

Reserved 2 00 00

Send Time 14 YYYYMMDDHHMMSS

k
0000 – FFFF

l
Count Number 4

i n
Tail Character 1 $ $

c l t ia
<Call Number>: The phone number of the incoming call which triggers the report message.

u e e n
Q nfid
C o

TRACGMT100AN001 – 70 –
GMT00 @Track Air Interface Protocol

3.3.2. Device Information Report

If the device information report function is enabled by the command AT+GTCFG, the device
will send the device information by the message +RESP:GTINF to the backend server
periodically.
 +RESP:GTINF,
Example:
+RESP:GTINF,080100,135790246811220,,16,898600810906F8048812,16,0,1,11870,,4.1,0,0,0,
,20090214013254,,12340,,00,00,+0800,0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

k
Unique ID 15 IMEI

n l
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

l i a
State 2 11|12|21|22|41|42|1A|16

c t i
ICCID 20

e n
CSQ RSSI <=2 0 – 31|99

e
0 – 7|99

u
CSQ BER <=2

Q nfid
External Power Supply 1 0|1

External Power VCC <=5 0 – 28000mV

Reserved 0

Backup Battery VCC <=4 0.0 – 4.5 V

o
Charging 1 0|1

C
LED On 1 0|1

GPS On Need 1 0|1

Reserved 0

Last Fix UTC Time 14 YYYYMMDDHHMMSS

Reserved 0

Analog Input VCC <=5 0 – 28000mV

Reserved 0

Digital Input 2 00 – 03

Digital Output 2 00 – 03

Time Zone Offset 5 ±HHMM

TRACGMT100AN001 – 71 –
GMT00 @Track Air Interface Protocol

Daylight Saving 1 0|1

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 <State>: The current motion state of the device.

 16 (Tow): The device attached vehicle is ignition off and it is towed.
 1A (Fake Tow): The device attached vehicle is ignition off and it might be towed.
 11 (Ignition Off Rest): The device attached vehicle is ignition off and it is motionless.
 12 (Ignition Off Motion): The device attached vehicle is ignition off and it is moving
before it is treated as being towed.
 21 (Ignition On Rest): The device attached vehicle is ignition on and it is motion less

k
 22 (Ignition On Motion): The device attached vehicle is ignition on and it is moving

l
 41 (Sensor Rest): The device attached vehicle is motionless without ignition signal

i n
detected

l a
 42 (Sensor Motion): The device attached vehicle is moving without ignition signal

t i
detected

c
 <ICCID>: The ICCID of the SIM card.

e n
 <CSQ RSSI>: The signal strength level.
CSQ RSSI Signal Strength (dBm)

u e
0 <-133

Q nfid
1 -111
2 – 30 -109 – -53
31 >-51
99 Unknown
 <CSQ BER>: The quality of the GSM signal. The range is 0-7, 99 for unknown.

o
 <External Power Supply>: Whether the external power supply is connected.
 0: Not connected

C
 1: Connected
 <External Power Supply VCC>: The voltage of the external power supply.
 <Backup Battery VCC>: The voltage of the backup battery. The value of this field is only
valid when the external power is not connected.
 <Charging>: Whether the backup battery is charging when the main power supply is
connected.
 0: Not charging
 1: Charging
 <Last Fix UTC Time>: The UTC time of the latest successful GPS fixing.
 <Analog Input VCC>: The voltage of the analog input.
 <Digital Input>: A bitwise hex integer to represents the logical status of the digital input.
From the lowest bit to the highest bit, each bit represents ignition detection and the digital
input 1 respectively. For each bit, 0 means disable status, 1 means enable status.
 <Digital Output>: A bitwise hex integer to represents the logical status of the digital output.

TRACGMT100AN001 – 72 –
GMT00 @Track Air Interface Protocol
From the lowest bit to the highest bit, each bit represents the digital output 1 and CUT relay
output respectively. For each bit, 0 means disable status, 1 means enable status.
 <Time Zone Offset>: The time offset of the local time zone to the UTC time.
 <Daylight Saving>: The current setting of the daylight saving.
 0: Daylight saving is disabled
 1: Daylight saving is enabled

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 73 –
GMT00 @Track Air Interface Protocol

3.3.3. Report of Real Time Querying

3.3.3.1. +RESP:GTGPS
After the device receives the command AT+GTRTO to read the GPS information, it will send
the GPS information to the backend server by the message +RESP:GTGPS.
 +RESP:GTGPS,
Example:
+RESP:GTGPS,080100,135790246811220,,0,,,0000,,,20090214013254,20090214093254,11F0
$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

k l
Unique ID 15 IMEI

i n
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

l ia
GPS On Need 1 0|1

c t
Reserved 0

e n
Reserved 0

u e
Report Composition
4 0000 – FFFF

Q nfid
Mask

Reserved 0

Reserved 0

Last Fix UTC Time 14 YYYYMMDDHHMMSS

o
Send Time 14 YYYYMMDDHHMMSS

C
Count Number 4 0000 – FFFF

Tail Character 1 $ $

 <Report Composition Mask>: Refer to <Report Composition Mask> of AT+GTCFG

command

3.3.3.2. +RESP:GTALL

After the device receives the command AT+GTRTO to read all the configurations, it will send
all configurations to the backend server by the message +RESP:GTALL. This message only
sends via GPRS even if the report mode is force on SMS.
 +RESP:GTALL,

TRACGMT100AN001 – 74 –
GMT00 @Track Air Interface Protocol

Example:
+RESP:GTALL,080100,135790246811220,,BSI,cmnet,,,,,,,SRI,3,1,1,116.226.44.17,7011,116.2
26.45.229,7012,+8613812341234,15,1,,,,,CFG,gmt100,gmt100,1,123.4,0,0,0000,1,,02FF,,0,1,30
0,0,,0,0,,,TOW,1,10,0,120,1,0,5,10,200,10,4,,,,,,,,,EPS,2,250,11870,3,2,1,1,0,0,1,,,,DIS,0,1,,,1,1,
4,,2,1,,,,,,,TMZ,–0330,0,,,,,FRI,1,1,,1,1000,2300,180,30,1000,1000,,0,600,,,GEO,0,3,121.41224
8,31.187891,1000,600,1,1,0,0,,,,,1,0,,,0,0,0,0,0,0,,,,,2,0,,,0,0,0,0,0,0,,,,,3,0,,,0,0,0,0,0,0,,,,,4,0,,,0,0
,0,0,0,0,,,,,SPD,1,80,120,60,300,1,1,0,0,,,,,,,,,,,,SOS,1,1,+8613812341234,1,1,0,0,,,,,PIN,1,0000,
0,,,,,OWH,1,1F,0900,1200,1300,1730,,,,1,1,0,0,,,,,DOG,1,60,1,0130,,1,1,,,,,IDL,1,2,1,,,,,1,1,0,0,,
,,,HMC,1,12345:12:34,,,,,,,,,HBM,1,,,100,21,6,,60,21,6,,,21,15,,1,1,8,3,,,,,JDC,1,10,40,,,,,1,1,15
,5,,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

k
Unique ID 15 IMEI

i n l
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

l ia
BSI 3 BSI BSI

c t
APN <=40

e n
APN User Name <=30

u e
APN Password <=30

Q nfid
Reserved 0

Reserved 0

Reserved 0

o
Reserved 0

SRI 3 SRI SRI

C
Report Mode 1 0–6

Reserved 1 0|1

Buffer Report 1 0–2

Main Server IP / <=60

Domain Name

Main Server Port <=5 0 – 65535

Backup Server IP <=15

Backup Server Port <=5 0 – 65535

SMS Gateway <=20

Heartbeat Interval <=3 0|5 – 360min

TRACGMT100AN001 – 75 –
GMT00 @Track Air Interface Protocol

SACK Enable 1 0|1

Reserved 0

Reserved 0

Reserved 0

Reserved 0

CFG 3 CFG CFG

Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z'

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

ODO Enable 1 0|1

ODO Initial Mileage <=9 0.0 – 4294967.0Km

k l
GPS On Need 1 0|1

i n
GSM report 1 0–3

l ia
Report Composition

c t
<=4 0000 – FFFF
Mask

e n
Power Saving Mode 1 0 –2

u e
Reserved 0

Q nfid
Event Mask <=4 00000000 – FFFFFFFF

Reserved 0

LED On 1 0|1

Info Report Enable 1 0|1

o
Info Report Interval <=5 30 – 86400sec

C
Location By Call 1 0–2

Reserved 0

Power Mode 1 0–2

Agps Mode 1 0|1

Reserved 0

Reserved 0

TOW 3 TOW TOW

Tow Enable 1 0|1

Engine Off to Tow <=2 0 – 900 sec

Fake Tow Delay <=2 0 – 600 sec

TRACGMT100AN001 – 76 –
GMT00 @Track Air Interface Protocol

Tow Interval <=5 0 – 86400 sec

Tow Output ID 1 0–2

Tow Output Status 1 0|1

Tow Output Duration <=3 0 – 255(×100ms)

Tow Output Toggle Times <=3 0 – 255

Rest Duration <=3 1 – 255(×15sec)

Motion Duration <=2 1 – 99(×100ms)

Motion Threshold 1 2–9

Reserved 0

Reserved 0

k l
Reserved 0

i n
Reserved 0

l ia
Reserved 0

c t
Reserved 0

e n
Reserved 0

u e
Reserved 0

Q nfid
EPS 3 EPS EPS

Mode 1 0–2

Min Threshold <=5 250 – 28000 mV

o
Max Threshold <=5 250 – 28000 mV

Sample Period <=2 0|1 – 12(×2s)

C
Debounce Time 1 0 – 5(×1s)

Output ID 1 0–2

Output Status 1 0|1

Duration <=3 0 – 255(×100ms)

Toggle Times <=3 0 – 255

Sync with FRI 1 0|1

Reserved 0

Reserved 0

Reserved 0

TRACGMT100AN001 – 77 –
GMT00 @Track Air Interface Protocol

DIS 3 DIS DIS

Ignition Detection 1 0 0

Sample Period <=2 0|1 – 12(×2s)

Reserved 0

Reserved 0

Input ID 1 1 1 1

Enable 1 0|1

Debounce Time <=2 0 – 20(×10ms)

Reserved 0

Reserved 0

k l
Reserved 0

i n
Reserved 0

l ia
Reserved 0

c t
Reserved 0

e n
TMZ 3 TMZ TMZ

u e
Time Zone 5 –|+HHMM

Q nfid
Daylight Saving 1 0|1

Reserved 0

Reserved 0

o
Reserved 0

Reserved 0

C
FRI 3 FRI FRI

Mode 1 0–4

Discard No Fix 2 0|1

Reserved 0

Period Enable 1 0|1

Begin Time 4 HHMM

End Time 4 HHMM

Check Interval <=5 0|30 – 86400sec

Send Interval <=5 0|5 – 86400sec

TRACGMT100AN001 – 78 –
GMT00 @Track Air Interface Protocol

Distance <=5 300 – 65535m

Mileage <=5 300 – 65535m

Reserved 0

Corner Report <=3 0 | 40 – 100

IGF Report Interval <=5 300-86400sec

Reserved 0

Reserved 0

GEO 3 GEO GEO

GEO ID0 1 0 0

Mode 1 0–3

k l
Longitude <=11 (–)xxx.xxxxxx

i n
Latitude <=10 (–)xx.xxxxxx

l ia
Radius <=7 50 – 6000000m

c t
Check Interval <=5 0 | 5 – 86400sec

e n
Output ID 1 0–2

u e
Output Status 1 0|1

Q nfid
Duration <=3 0 – 255(×100ms)

Toggle Times <=3 0 – 255

Reserved 0

o
Reserved 0

Reserved 0

C
Reserved 0

GEO ID1 1 1 1

Mode 1 0–3

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

Radius <=7 50 – 6000000m

Check Interval <=5 0 | 5 – 86400sec

Output ID 1 0–2

Output Status 1 0|1

TRACGMT100AN001 – 79 –
GMT00 @Track Air Interface Protocol

Duration <=3 0 – 255(×100ms)

Toggle Times <=3 0 – 255

Reserved 0

Reserved 0

Reserved 0

Reserved 0

GEO ID2 1 2 2

Mode 1 0–3

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

k
50 – 6000000m

l
Radius <=7

i n
Check Interval <=5 0 | 5 – 86400sec

l ia
Output ID 1 0–2

c t
Output Status 1 0|1

e n
Duration <=3 0 – 255(×100ms)

u e
Toggle Times <=3 0 – 255

Q nfid
Reserved 0

Reserved 0

Reserved 0

o
Reserved 0

GEO ID3 1 3 3

C
Mode 1 0–3

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

Radius <=7 50 – 6000000m

Check Interval <=5 0 | 5 – 86400sec

Output ID 1 0–2

Output Status 1 0|1

Duration <=3 0 – 255(×100ms)

Toggle Times <=3 0 – 255

TRACGMT100AN001 – 80 –
GMT00 @Track Air Interface Protocol

Reserved 0

Reserved 0

Reserved 0

Reserved 0

GEO ID4 1 4 4

Mode 1 0–3

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

Radius <=7 50 – 6000000m

Check Interval <=5 0 | 5 – 86400sec

k
0–2

l
Output ID 1

i n
Output Status 1 0|1

l ia
Duration <=3 0 – 255(×100ms)

c t
Toggle Times <=3 0 – 255

e n
Reserved 0

u e
Reserved 0

Q nfid
Reserved 0

Reserved 0

SPD 3 SPD SPD

o
Mode 1 0–2

Min Speed <=3 0 – 400km/h

C
Max Speed <=3 0 – 400km/h

Validity <=4 15 – 3600sec

Send Interval <=4 30 – 3600sec

Output ID 1 0–2

Output Status 1 0|1

Duration <=3 0 – 255(×100ms)

Toggle Times <=3 0 – 255

Reserved 0

Reserved 0

TRACGMT100AN001 – 81 –
GMT00 @Track Air Interface Protocol

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

SOS 3 SOS SOS

k
0–2

l
Mode 1

i n
Digital Input ID 1 0|1

l ia
SOS Number <=20

c t
Output ID 1 0–2

e n
Output Status 1 0|1

u e
Duration <=3 0 – 255(×100ms)

Q nfid
Toggle Times <=3 0 – 255

Reserved 0

Reserved 0

o
Reserved 0

Reserved 0

C
PIN 3 PIN PIN

Enable Auto-unlock PIN 1 0|1

PIN 1 '0' – '9'

SIM PIN Lock 1 0|1

Reserved 0

Reserved 0

Reserved 0

Reserved 0

OWH 3 OWH OWH

TRACGMT100AN001 – 82 –
GMT00 @Track Air Interface Protocol

Mode 1 0–1

Day of Work <=2 0 – 7F

Working Hours Start1 4 HHMM

Working Hours End1 4 HHMM

Working Hours Start2 4 HHMM

Working Hours End2 4 HHMM

Reserved 0

Reserved 0

Reserved 0

Digital Output ID 1 0–2

k l
Output Status 1 0|1

i n
Duration <=3 0 – 255(×100ms)

l ia
Toggle Times <=3 0 – 255

c t
Reserved 0

e n
Reserved 0

u e
Reserved 0

Q nfid
Reserved 0

DOG 3 DOG DOG

Mode 1 0–2

o
Ignition Frequency <=3 10 – 120min

Interval <=2 1 – 30

C
Time 4 HHMM

Reserved 0

Report Before Reboot 1 0|1

Input ID 1 0|1

Reserved 0

Reserved 0

Reserved 0

Reserved 0

IDL 3 IDL IDL

TRACGMT100AN001 – 83 –
GMT00 @Track Air Interface Protocol

Mode 1 0|1

Time to Stationary 1 1 – 5 min

Time to Movement 1 1 – 5 min

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Output ID 1 0–2

Output Status 1 0|1

Duration <=3 0 – 255(×100ms)

k
0 – 255

l
Toggle Times <=3

i n
Reserved 0

l ia
Reserved 0

c t
Reserved 0

e n
Reserved 0

u e
HMC 3 HMC HMC

Q nfid
Ignition Time Counter
1 0|1
Enable

Initial Ignition Time

11 00000:00:00-99999:00:00
Count

o
Reserved 0

C
Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Reserved 0

HBM 3 HBM HBM

HBM Enable 1 0|1

Reserved 0

TRACGMT100AN001 – 84 –
GMT00 @Track Air Interface Protocol

Reserved 0

High Speed <=3 100 – 400km/h

∆Vhb <=3 0 – 100km/h

∆Vha <=3 0 – 100km/h

Reserved 0

Medium Speed <=3 100 – 400km/h

∆Vmb <=3 0 – 100km/h

∆Vma <=3 0 – 100km/h

Reserved 0

Reserved 0

k
∆Vlb 0 – 100km/h

l
<=3

i n
∆Vla <=3 0 – 100km/h

l ia
Reserved 0

c t
Output ID 1 0–2

e n
Output Status 1 0|1

u e
Duration <=3 0 – 255(×100ms)

Q nfid
Toggle Times <=3 0 – 255

Reserved 0

Reserved 0

o
Reserved 0

Reserved 0

C
JDC 3 JDC JDC

Mode 1 0|1 0

Signal Threshold <=3 0 – 255 10

C1 Threshold <=3 0 – 255 40

Reserved 0

Reserved 0

Reserved 0

Reserved 0

Output ID 1 0–2

TRACGMT100AN001 – 85 –
GMT00 @Track Air Interface Protocol

Output Status 1 0|1

Duration <=3 0 – 255(×100ms)

Toggle Times <=3 0 – 255

Reserved 0

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

3.3.3.3. +RESP:GTCID

k
After the device receives the command AT+GTRTO to read the ICCID of the SIM card, it will

l
send the ICCID to the backend server by the message +RESP:GTCID.

i n
 +RESP:GTCID,

l ia
Example:

c t
+RESP:GTCID,080100,135790246811220,,898600810906F8048812,20090214093254,11F0$

e n
Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,

u e
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Q nfid
Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

ICCID 20

o
Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

C
Tail Character 1 $ $

3.3.3.4. +RESP:GTCSQ
After the device receives the command AT+GTRTO to read the GSM signal level, it will send
the GSM signal level to the backend server by the message +RESP:GTCSQ.
 +RESP:GTCSQ,
Example:
+RESP:GTCSQ,080100,135790246811220,,16,0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

Protocol Version 6 XX0000 – XXFFFF,

TRACGMT100AN001 – 86 –
GMT00 @Track Air Interface Protocol

X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

CSQ RSSI <=2 0 – 31|99

CSQ BER <=2 0 – 7|99

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 <CSQ RSSI>: The signal strength level.

k
CSQ RSSI Signal Strength (dBm)

l
0 <-133

i n
1 -111

l a
2 – 30 -109 – -53

c t i
31 >-51
99 Unknown

e n
 <CSQ BER>: The quality of the GSM signal. The range is 0-7, 99 for unknown.

u
Q nfid e
3.3.3.5. +RESP:GTVER

After the device receives the command AT+GTRTO to get the versions (including software
version and hardware version), it will send the version information to the backend server by the
message +RESP:GTVER.

o
 +RESP:GTVER,
Example:

C
+RESP:GTVER,080100,135790246811220,,GMT100,0100,0101,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Device Type 10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Software Version 4 0000 – FFFF

Hardware Version 4 0000 – FFFF

Send Time 14 YYYYMMDDHHMMSS

TRACGMT100AN001 – 87 –
GMT00 @Track Air Interface Protocol

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 <Device Type>: The type of the device.

 <Software Version>: The software version. The first two characters represent the major
version and the last two characters represent the minor version. For example: 010A means the
version 1.10.
 <Hardware Version>: The hardware version. The first two characters represent the major
version and the last two characters represent the minor version. For example: 010A means the
version 1.10.

3.3.3.6. +RESP:GTBAT

k l
After the device receives the command AT+GTRTO to read the power supply information, it

n
will send the power supply information to the backend server by the message +RESP:GTBAT.

l i a
 +RESP:GTBAT,

c t i
Example:
+RESP:GTBAT,080100,135790246811220,,1,12000,,4.40,0,0,20090214093254,11F0$

e n
Parameter Length(byte) Range/Format Default

u e
XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Q nfid
Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

External Power Supply 1 0|1

o
External Power VCC <=5 0 – 28000mV

C
Reserved 0

Backup Battery VCC <=4 0.0 – 4.5 V

Charging 1 0|1

LED On 1 0|1

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

3.3.3.7. +RESP:GTIOS
After the device receives the command AT+GTRTO to get all the IO ports status, it will send the
status to the backend server by the message +RESP:GTIOS.

TRACGMT100AN001 – 88 –
GMT00 @Track Air Interface Protocol
 +RESP:GTIOS,
Example:
+RESP:GTIOS,080100,135790246811220,,,12000,,00,00,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Reserved 0

Analog Input VCC1 <=4 0 – 32000 mV

Reserved 0

k l
Digital Input 2 00 – 03

i n
Digital Output 2 00 – 03

l ia
Send Time 14 YYYYMMDDHHMMSS

c t
Count Number 4 0000 – FFFF

e n
Tail Character 1 $ $

u
Q nfid e
3.3.3.8. +RESP:GTTMZ
After the device receives the command AT+GTRTO to get the time zone settings, it will send
the time zone settings by the message +RESP:GTTMZ to the backend server.
 +RESP:GTTMZ,

o
Example:

C
+RESP:GTTMZ,080100,135790246811220,,+0800,0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Time Zone Offset 5 ±HHMM

Daylight Saving 1 0|1

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

TRACGMT100AN001 – 89 –
GMT00 @Track Air Interface Protocol

Tail Character 1 $ $

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 90 –
GMT00 @Track Air Interface Protocol

3.3.4. Event Report

The following event reports are triggered when certain events occur.
+RESP:GTPNA: Power on report
+RESP:GTPFA: Power off report
+RESP:GTMPN: The report for connecting main power supply
+RESP:GTMPF: The report for disconnecting main power supply
+RESP:GTBTC: Backup battery starts charging report
+RESP:GTSTC: Backup battery stop charging report.
+RESP:GTBPL: Backup battery low
+RESP:GTBPN: Backup battery is connected.
+RESP:GTBPF: Backup battery is removed.
+RESP:GTSOA: Shell is opened.

k
+RESP:GTSTT: Device motion state indication when the motion state is changed
+RESP:GTANT: External GPS antenna status indication when the state is changed

n l
+RESP:GTPDP: GPRS connection establishment report

l i a
+RESP:GTIGN: ignition on report

i
+RESP:GTIGF: ignition off report

c t
+RESP:GTIDN: Enter into idling status

n
+RESP:GTIDF: Leave idling status

e
+RESP:GTJDR: Jamming indication

u e
+RESP:GTGSM:The report for the information of the service cell and the neighbor cells.

Q nfid
In +RESP:GTMPN, +RESP:GTMPF, +RESP:GTBTC, +RESP:GTSTC, +RESP:GTBPL,
+RESP:GTBPN, +RESP:GTBPF, +RESP:GTSOA, +RESP:GTSTT, +RESP:GTANT,
+RESP:GTIGN, +RESP:GTIGF, +RESP:GTIDN, +RESP:GTIDF and +RESP:GTJDR event
reports, the last known GPS information and the current GSM network information are involved.

o
 +RESP:GTPNA,
 +RESP:GTPFA,

C
 +RESP:GTPDP,
Example:
+RESP:GTPNA,080100,135790246811220,,20090214093254,11F0$
+RESP:GTPFA,080100,135790246811220,,20090214093254,11F0$
+RESP:GTPDP,080100,135790246811220,,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Send Time 14 YYYYMMDDHHMMSS

TRACGMT100AN001 – 91 –
GMT00 @Track Air Interface Protocol

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 +RESP:GTMPN,
 +RESP:GTMPF,
 +RESP:GTBTC,
 +RESP:GTBPN,
 +RESP:GTBPF,
 +RESP:GTSOA,
 +RESP:GTJDR,
Example:
+RESP:GTMPN,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,2009021401

k
3254,0460,0000,18d8,6141,00,20090214093254,11F0$

n l
+RESP:GTMPF,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,20090214013

i
254,0460,0000,18d8,6141,00,20090214093254,11F0$

l ia
+RESP:GTBTC,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,20090214013

c t
254,0460,0000,18d8,6141,00,20090214093254,11F0$
+RESP:GTBPN,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,20090214013

e n
254,0460,0000,18d8,6141,00,20090214093254,11F0$

u e
+RESP:GTBPF,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,20090214013
254,0460,0000,18d8,6141,00,20090214093254,11F0$

Q nfid
+RESP:GTSOA,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,20090214013
254,0460,0000,18d8,6141,00,20090214093254,11F0$
+RESP:GTJDR,080100,135790246811220,,0,4.3,92,70.0,121.354335,31.222073,20090214013
254,0460,0000,18d8,6141,00,20090214093254,11F0$

o
Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6

C
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

GPS Accuracy <=2 0 0, Last known

Speed <=5 0.0 – 999.9 km /h

Azimuth <=3 0 – 359

Altitude <=8 (–)xxxxx.x m

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

GPS UTC Time 14 YYYYMMDDHHMMSS

TRACGMT100AN001 – 92 –
GMT00 @Track Air Interface Protocol

MCC 4 0XXX

MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

Reserved 2 00 00

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

k
 +RESP:GTSTC,

l
Example:

i n
+RESP:GTSTC,080100,135790246811220,,,0,4.3,92,70.0,121.354335,31.222073,20090214013

l a
254,0460,0000,18d8,6141,00,20090214093254,11F0$

c t i
Parameter Length(byte) Range/Format Default

e n
XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

u e
Unique ID 15 IMEI

Q nfid
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Reserved 0

GPS Accuracy <=2 0 0, Last known

o
Speed <=5 0.0 – 999.9 km /h

Azimuth <=3 0 – 359

C
Altitude <=8 (–)xxxxx.x m

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

GPS UTC Time 14 YYYYMMDDHHMMSS

MCC 4 0XXX

MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

Reserved 2 00 00

TRACGMT100AN001 – 93 –
GMT00 @Track Air Interface Protocol

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 +RESP:GTBPL,
Example:
+RESP:GTBPL,080100,135790246811220,,3.53,0,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

k l
Unique ID 15 IMEI

i n
'0' – '9' 'a' – 'z' 'A' – 'Z'

l a
Device Name <=10

i
0.0 – 4.5 V

t
Backup Battery VCC <=4

c
GPS Accuracy <=2 0 0, Last known

e n
Speed <=5 0.0 – 999.9 km /h

u e
Azimuth <=3 0 – 359

Q nfid
Altitude <=8 (–)xxxxx.x m

Longitude <=11 (–)xxx.xxxxxx

Latitude <=10 (–)xx.xxxxxx

o
GPS UTC Time 14 YYYYMMDDHHMMSS

MCC 4 0XXX

C
MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

Reserved 2 00 00

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 +RESP:GTSTT,

TRACGMT100AN001 – 94 –
GMT00 @Track Air Interface Protocol

Example:
+RESP:GTSTT,080100,135790246811220,,16,0,4.3,92,70.0,121.354335,31.222073,200902140
13254,0460,0000,18d8,6141,00,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

State 2 11|12|21|22|41|42|16

GPS Accuracy <=2 0 0, Last known

Speed <=5 0.0 – 999.9 km /h

k l
Azimuth <=3 0 – 359

i n
Altitude <=8 (–)xxxxx.x m

l ia
Longitude <=11 (–)xxx.xxxxxx

c t
Latitude <=10 (–)xx.xxxxxx

e n
GPS UTC Time 14 YYYYMMDDHHMMSS

u e
MCC 4 0XXX

Q nfid
MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

o
Reserved 2 00 00

Send Time 14 YYYYMMDDHHMMSS

C
Count Number 4 0000 – FFFF

Tail Character 1 $ $
 <State>: The current movement state of the device.
 16 (Tow): The device attached vehicle is ignition off and it is towed.
 11 (Ignition Off Rest): The device attached vehicle is ignition off and it is motionless.
 12 (Ignition Off Motion): The device attached vehicle is ignition off and it is moving
before it is treated as being towed.
 21 (Ignition On Rest): The device attached vehicle is ignition on and it is motion less
 22 (Ignition On Motion): The device attached vehicle is ignition on and it is moving
 41 (Sensor Rest): The device attached vehicle is motionless without ignition signal
detected
 42 (Sensor Motion): The device attached vehicle is moving without ignition signal
detected

TRACGMT100AN001 – 95 –
GMT00 @Track Air Interface Protocol

 +RESP:GTANT,
Example:
+RESP:GTANT,080100,135790246811220,,0,0,4.3,92,70.0,121.354335,31.222073,2009021401
3254,0460,0000,18d8,6141,00,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

k
External GPS Antenna 1 0|1|2|3

l
GPS Accuracy <=2 0 0, Last known

i n
0.0 – 999.9 km /h

a
Speed <=5

l i
0 – 359

t
Azimuth <=3

c
Altitude <=8 (–)xxxxx.x m

e n
Longitude <=11 (–)xxx.xxxxxx

u e
Latitude <=10 (–)xx.xxxxxx

Q nfid
GPS UTC Time 14 YYYYMMDDHHMMSS

MCC 4 0XXX

MNC 4 0XXX

o
LAC 4 XXXX

Cell ID 4 XXXX

C
Reserved 2 00 00

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $
 < External GPS Antenna>: The current state of the external GPS antenna.
 0: The external GPS antenna of the device is working.
 1: The external GPS antenna of the device is detected in open circuit state.
 2: The external GPS antenna of the device is detected in short circuit state.
 3: The external GPS antenna of the device is in unknown state.

 +RESP:GTIGN,

TRACGMT100AN001 – 96 –
GMT00 @Track Air Interface Protocol

Example:
+RESP:GTIGN,080100,135790246811220,,1200,0,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Duration of Ignition Off <=6 0 – 999999 sec

GPS Accuracy <=2 0 0, Last known

Speed <=5 0.0 – 999.9 km /h

k l
Azimuth <=3 0 – 359

i n
Altitude <=8 (–)xxxxx.x m

l ia
Longitude <=11 (–)xxx.xxxxxx

c t
Latitude <=10 (–)xx.xxxxxx

e n
GPS UTC Time 14 YYYYMMDDHHMMSS

u e
MCC 4 0XXX

Q nfid
MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

o
Reserved 2 00

Mileage <=9 0.0 – 4294967.0 km

C
Ignition Time Count 11 HHHHH:MM:SS

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $
 <Duration of Ignition Off>: Duration since last time the ignition is off. If greater than 999999
seconds, report as 999999 seconds.
 <Ignition time Count>: If ignition time counter function is enabled by the command
AT+GTHMC, total ignition time counted when engine is on will be reported in this field. If
the function is disabled, this field will be reserved. It is formatted with 5 hour digits and 2
minute digits and 2 second digits and ranges from 00000:00:00– 99999:00:00.

TRACGMT100AN001 – 97 –
GMT00 @Track Air Interface Protocol
 +RESP:GTIGF,
Example:
+RESP:GTIGF,080100,135790246811220,,1200,0,4.3,92,70.0,121.354335,31.222073,2009021
4013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Duration of Ignition On <=6 0 – 999999 sec

GPS Accuracy <=2 0 0, Last known

k
Speed <=5 0.0 – 999.9 km /h

n l
0 – 359

i
Azimuth <=3

l ia
Altitude <=8 (–)xxxxx.x m

c t
Longitude <=11 (–)xxx.xxxxxx

e n
Latitude <=10 (–)xx.xxxxxx

u e
GPS UTC Time 14 YYYYMMDDHHMMSS

Q nfid
MCC 4 0XXX

MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

o
Reserved 2 00

C
Mileage <=9 0.0 – 4294967.0 km

Ignition Time Count 2|11 00|HHHHH:MM:SS

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $
 <Duration of Ignition On>: Duration since last time the ignition is on. If greater than 999999
seconds, report as 999999 seconds.

 +RESP:GTIDN,
Example:

TRACGMT100AN001 – 98 –
GMT00 @Track Air Interface Protocol

+RESP:GTIDN,080100,135790246811220,,,,0,4.3,92,70.0,121.354335,31.222073,2009021401
3254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Reserved 0

Reserved 0

GPS Accuracy <=2 0 0, Last known

k
Speed <=5 0.0 – 999.9 km /h

n l
Azimuth <=3 0 – 359

l i a
Altitude <=8 (–)xxxxx.x m

c t i
Longitude <=11 (–)xxx.xxxxxx

e n
Latitude <=10 (–)xx.xxxxxx

GPS UTC Time 14 YYYYMMDDHHMMSS

u e
MCC 4 0XXX

Q nfid
MNC 4 0XXX

LAC 4 XXXX

Cell ID 4 XXXX

o
Reserved 2 00 00

0.0 – 4294967.0 km

C
Mileage <=9

Send Time 14 YYYYMMDDHHMMSS

Count Number 4 0000 – FFFF

Tail Character 1 $ $

 +RESP:GTIDF,
Example:
+RESP:GTIDF,080100,135790246811220,,22,300,0,4.3,92,70.0,121.354335,31.222073,200902
14013254,0460,0000,18d8,6141,00,2000.0,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

TRACGMT100AN001 – 99 –
GMT00 @Track Air Interface Protocol

XX0000 – XXFFFF,
Protocol Version 6
X∈{'A' – 'Z','0' – '9'}

Unique ID 15 IMEI

Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

Motion State 2 11|12|16|22

Duration of Idling Status <=6 0 – 999999 sec

GPS Accuracy <=2 0 0, Last known

Speed <=5 0.0 – 999.9 km /h

Azimuth <=3 0 – 359

Altitude <=8 (–)xxxxx.x m

k
Longitude <=11 (–)xxx.xxxxxx

n l
Latitude <=10 (–)xx.xxxxxx

l i ia
GPS UTC Time 14 YYYYMMDDHHMMSS

c t
MCC 4 0XXX

e n
MNC 4 0XXX

u e
LAC 4 XXXX

Q nfid
Cell ID 4 XXXX

Reserved 2 00 00

Mileage <=9 0.0 – 4294967.0 km

Send Time 14 YYYYMMDDHHMMSS

o
Count Number 4 0000 – FFFF

C
Tail Character 1 $ $
 <Motion State>: The current motion state when the vehicle leaves idling status.
 <Duration of Idling Status>: The time that the vehicle has been in idling status. If greater
than 999999 seconds, report as 999999 seconds.

+RESP:GTGSM
Example:
+RESP:GTGSM,080100,135790246811220,FRI,0460,0000,1878,0871,20,,0460,0000,1878,015
2,16,,,,,,,,,,,,,,,,,,,,,,,,,,0460,0000,1878,0873,57,00,20090214093254,11F0$

Parameter Length(byte) Range/Format Default

Protocol Version 6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}

TRACGMT100AN001 – 100 –
GMT00 @Track Air Interface Protocol
Unique ID 15 IMEI

Fix Type 3 SOS|RTL|LBC|TOW|FRI|GI

R
MCC1 4 0XXX

MNC1 4 0XXX

LAC1 4

Cell ID1 4

RX Level1 2 0-63

Reserved 0

MCC2 4 0XXX

k
MNC2 4 0XXX

n l
LAC2 4

l i a
Cell ID2 4

c t i
RX Level2 2 0-63

n
Reserved 0

e
MCC3 4 0XXX

u e
MNC3 4 0XXX

Q nfid
LAC3 4

Cell ID3 4

RX Level3 2 0-63

o
Reserved 0

MCC4 4 0XXX

C
MNC4 4 0XXX

LAC4 4

Cell ID4 4

RX Level4 2 0-63

Reserved 0

MCC5 4 0XXX

MNC5 4 0XXX

LAC5 4

Cell ID5 4

TRACGMT100AN001 – 101 –
GMT00 @Track Air Interface Protocol
RX Level5 2 0-63

Reserved 0

MCC6 4 0XXX

MNC6 4 0XXX

LAC6 4

Cell ID6 4

RX Level6 2 0-63

Reserved 0

MCC 4 0XXX

MNC 4 0XXX

k
LAC 4

i n l
Cell ID 4

l ia
RX Level 2 0-63

c t
Reserved 2 00

e n
Send Time 14 YYYYMMDDHHMMSS

u e
Count Number 4 0000 – FFFF

Q nfid
Tail Character 1 $ $

 <Fix Type> : A string to indicate what kind of GPS fixing this cell information is for.
"SOS" This cell information is for SOS requirement.

o
"RTL" This cell information is for RTL requirement.
"LBC" This cell information is for LBC requirement.
"TOW" This cell information is for TOW requirement.

C
"FRI" This cell information is for FRI requirement.
"GIR" This cell information is for sub command “C” in AT+GTRTO command.
 <MCC(i)> : MCC of the neighbor cell i (i is the index of the neighbor cell).
 <MNC(i)> : MNC of the neighbor cell i.
 <LAC(i)> : LAC in hex format of the neighbor cell i.
 <Cell ID(i)> : Cell ID in hex format of the neighbor cell i.
 <RX Level(i)> : The signal strength of the neighbor cell i. This parameter is a 6-bit coded in 1
dB steps:
0: -110 dBm
1 to 62: -109 to -48 dBm
63: -47 dBm
 <MCC>: MCC of the service cell.
 <MNC>: MNC of the service cell.
 <LAC>: LAC in hex format of the service cell.

TRACGMT100AN001 – 102 –
GMT00 @Track Air Interface Protocol
 <Cell ID>: Cell ID in hex format of the service cell.
 <RX Level>: The signal strength of the service cell.

Note:
1. It probably includes only several neighbor cells‟ (even no neighbor cell) information. If some
neighbor cell wasn‟t find, all the fields of the neighbor cell will be empty.
2. "ffff" in the field of <LAC(i)>, <Cell ID(i)> means the terminal doesn‟t know the value.
3. This message cannot be sent via SMS.

i n k a l
c l t i
u e e n
Q nfid
C o

TRACGMT100AN001 – 103 –
GMT00 @Track Air Interface Protocol

3.3.5. Buffer Report

If the buffer report function is enabled by command AT+GTSRI, the terminal will save the report
messages in a local buffer when the following occurs.
 GSM network is not available
 Failed to activate GPRS context for the TCP or UDP connection.
 Failed to establish the TCP connection with the backend server.
These messages will be sent to the backend server when connection to the server recovers again.
The buffer reports are saved to the built-in non-volatile memory in case the device is reset. The
terminal can buffer up to 3000 messages (160 bytes per message).

Detailed information about buffer report is listed below.

 Only +RESP messages are buffered except that +RESP:GTALL is not buffered
 In the buffer report, the original header string “+RESP” is replaced by “+BUFF” while keeps

k
the other content untouched including the original sending time and count number.

n l
 Buffered messages will be sent only via GPRS by TCP or UDP protocol. They cannot be sent

l i a
via SMS. If the current report mode is forcing on SMS, the buffered messages will be sent

i
via TCP short connection.

c t
 The buffered messages will be sent after the other normal messages sending if <Buffer

n
Mode> in AT+GTSRI is set to 1.

e
 The buffered messages will be sent before the other normal messages sending if <Buffer

u e
Mode> in AT+GTSRI is set to 2. The SOS message has the highest priority and is sent
before the buffered messages.

Q nfid
Example:
The following is an example of the buffered message:
+BUFF:GTFRI,020100,135790246811220,,0,0,1,1,4.3,92,70.0,121.354335,31.222073,200902140
13254,0460,0000,18d8,6141,00,,20090214093254,11F0$

C o

TRACGMT100AN001 – 104 –
GMT00 @Track Air Interface Protocol

3.3.6. Report Google Maps hyperlink

According to the setting of the command AT+GTSOS and the configuration of location by call,
the device can send a SMS with Google Maps hyperlink to a mobile phone.

If the <Mode> was set to 2 in the command AT+GTSOS, the terminal will send a SMS with
Google Maps hyperlink to the direct phone numbers.

If <Location By Call> is set to 2, the terminal will send its current position to the incoming call via
SMS with Google Maps hyperlink.

 Google Maps hyperlink

Example:
GMT100 SOS:

k
<http://maps.google.com/maps?q=31.222073,121.354335

n l
F1 D2009/01/01T00:00:00>

l i ia
GMT100 LBC:

c t
<http://maps.google.com/maps?q=31.222073,121.354335
F1 D2009/01/01T00:00:00>

e n
Parameter Length(byte) Range/Format Default

e
'0' – '9' 'a' – 'z' 'A' – 'Z'

u
Device Name <=10
Report Type 3 SOS|LBC

Q nfid
Google Maps Hyperlink http://maps.google.com http://maps.google.co
30
Header /maps?q= m/maps?q=
Latitude <=10 (–)xx.xxxxxx
Longitude <=11 (–)xxx.xxxxxx
GPS Fix <=3 F0|F1 – F50

o
DYYYY/MM/DDTHH
GPS UTC Time 20
:MM:SS

C
 <Report Type>: A string that includes GPS fix type ("SOS", "LBC").
 <Google Maps hyperlink>: A string of a google map hyperlink.
 <GPS Fix>: The accuracy of the location information. F0 means no GPS fix.

TRACGMT100AN001 – 105 –
GMT00 @Track Air Interface Protocol

3.4. Heartbeat

Heartbeat is used to maintain the contact between the device and the backend server if
communicating via GPRS. The heartbeat package is sent to the backend server at the interval
defined by <Heartbeat interval> in AT+GTSRI command.
 +ACK:GTHBD
Example:
+ACK:GTHBD,080100,135790246811220,,20100214093254,11F0$

Parameter Length(byte) Range/Format Default

Protocol version XX0000 – XXFFFF,

6
X∈{'A' – 'Z','0' – '9'}

k
Unique ID 15 IMEI

i n l
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z'

l ia
Send Time 14 YYYYMMDDHHMMSS

c t
Count Number 4 0000 – FFFF

e n
Tail Character 1 $ $

u e
Whenever the backend server receives a heartbeat package, it should reply an acknowledgement to

Q nfid
the device.
 +SACK:GTHBD
Example:
+SACK:GTHBD,080100,11F0$

o
+SACK:GTHBD,,11F0$

Parameter Length(byte) Range/Format Default

C
Protocol version XX0000 – XXFFFF,
6
X∈{'A' – 'Z','0' – '9'}

Count Number 4 0000 – FFFF

Tail Character 1 $ $
 <Protocol Version>: The device type and the protocol version that the backend server
supported. This field is optional. The backend server could just send an empty field to
decrease the length of the heartbeat data acknowledgement.
 <Count Number>: The backend server uses the <Count Number> extracted from the
heartbeat package from the device as the <Count Number> in the server acknowledgement of
the heartbeat.

TRACGMT100AN001 – 106 –
GMT00 @Track Air Interface Protocol

3.5. Server Acknowledgement

If server acknowledgement is enabled by AT+GTSRI command, the backend server should reply
to the device whenever it receives a message from the device.
 +SACK:
Example:
+SACK:11F0$

Parameter Length(byte) Range/Format Default

Count Number 4 0000 – FFFF

Tail Character 1 $ $

k
 <Count Number>: The backend server uses the <Count Number> extracted from the received

l
message as the <Count Number> in the server acknowledgement.

c l i n t ia
u e e n
Q nfid
C o

TRACGMT100AN001 – 107 –
GMT00 @Track Air Interface Protocol

Appendix: Message Index

 Command and ACK

AT+GTBSI
+ACK:GTBSI
AT+GTSRI
+ACK:GTSRI
AT+GTQSS
+ACK:GTQSS
AT+GTCFG
+ACK:GTCFG
AT+GTOUT

k
+ACK:GTOUT
AT+GTDIS

n l
+ACK:GTDIS

l i a
AT+GTIOB

i
+ACK:GTIOB

c t
AT+GTEPS

n
+ACK:GTEPS

e
AT+GTAIS

u e
+ACK:GTAIS
AT+GTFRI

Q nfid
+ACK:GTFRI
AT+GTGEO
+ACK:GTGEO
AT+GTTOW
+ACK:GTTOW

o
AT+GTSPD
+ACK:GTSPD

C
AT+GTSOS
+ACK:GTSOS
AT+GTIDL
+ACK:GTIDL
AT+GTHBM
+ACK:GTHBM
AT+GTTMA
+ACK:GTTMA
AT+GTOWH
+ACK:GTOWH
AT+GTDOG
+ACK:GTDOG
AT+GTPIN
+ACK:GTPIN

TRACGMT100AN001 – 108 –
GMT00 @Track Air Interface Protocol
AT+GTRTO
+ACK:GTRTO
AT+GTHMC
+ACK:GTHMC
AT+GTJDC
+ACK:GTJDC

 Position Related Report

+RESP:GTTOW
+RESP:GTEPS
+RESP:GTDIS
+RESP:GTIOB
+RESP:GTFRI

k
+RESP:GTGEO

l
+RESP:GTSPD

i n
+RESP:GTSOS

l ia
+RESP:GTRTL

c t
+RESP:GTLBC
+RESP:GTDOG

e n
+RESP:GTAIS
+RESP:GTIGL

u e
+RESP:GTHBM

Q nfid
 Device Information Report
+RESP:GTINF

o
 Report for Querying
+RESP:GTGPS

C
+RESP:GTALL
+RESP:GTCID
+RESP:GTCSQ
+RESP:GTVER
+RESP:GTBAT
+RESP:GTIOS
+RESP:GTTMZ

 Event Report
+RESP:GTPNA
+RESP:GTPFA
+RESP:GTMPN
+RESP:GTMPF
+RESP:GTBTC

TRACGMT100AN001 – 109 –
GMT00 @Track Air Interface Protocol
+RESP:GTSTC
+RESP:GTBPL
+RESP:GTBPN
+RESP:GTBPF
+RESP:GTSOA
+RESP:GTSTT
+RESP:GTANT
+RESP:GTPDP
+RESP:GTIGN
+RESP:GTIGF
+RESP:GTIDN
+RESP:GTIDF
+RESP:GTJDR

k
 Heartbeat

l
+ACK:GTHBD

i n
+SACK:GTHBD

l t ia


c
Server Acknowledgement
+SACK

u e e n
Q nfid
C o

TRACGMT100AN001 – 110 –