2N5484 / 5485 / 5486 / MMBF5484 / 5485 / 5486

2N5484 MMBF5484
2N5485 MMBF5485
2N5486 MMBF5486

S
G TO-92
S SOT-23 D
D
Mark: 6B / 6M / 6H
NOTE: Source & Drain
are interchangeable

N-Channel RF Amplifier
This device is designed primarily for electronic switching
applications such as low On Resistance analog switching.
Sourced from Process 50.

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

Symbol Parameter Value Units

VDG Drain-Gate Voltage 25 V
VGS Gate-Source Voltage - 25 V
IGF Forward Gate Current 10 mA
TJ ,Tstg Operating and Storage Junction Temperature Range -55 to +150 °C

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Characteristic Max Units

2N5484-5486 *MMBF5484-5486
PD Total Device Dissipation 350 225 mW
Derate above 25°C 2.8 1.8 mW/°C
RθJC Thermal Resistance, Junction to Case 125 °C/W
RθJA Thermal Resistance, Junction to Ambient 357 556 °C/W
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."

1997 Fairchild Semiconductor Corporation

 2N5484 / 5485 / 5486 / MMBF5484 / 5485 / 5486
N-Channel RF Amplifier
(continued)

Electrical Characteristics TA = 25°C unless otherwise noted

Symbol Parameter Test Conditions Min Typ Max Units

OFF CHARACTERISTICS
V(BR)GSS Gate-Source Breakdown Voltage IG = - 1.0 µA, VDS = 0 - 25 V
IGSS Gate Reverse Current VGS = - 20 V, VDS = 0 - 1.0 nA
VGS= - 20 V, VDS= 0, TA= 100°C - 0.2 µA
VGS(off) Gate-Source Cutoff Voltage VDS = 15 V, ID = 10 nA 5484 - 0.3 - 3.0 V
5485 - 0.5 - 4.0 V
5486 - 2.0 - 6.0 V

ON CHARACTERISTICS
IDSS Zero-Gate Voltage Drain Current* VDS = 15 V, VGS = 0 5484 1.0 5.0 mA
5485 4.0 10 mA
5486 8.0 20 mA

SMALL SIGNAL CHARACTERISTICS

gfs Forward Transfer Conductance VDS = 15 V, VGS = 0, f = 1.0 kHz
5484 3000 6000 µmhos
5485 3500 7000 µmhos
5486 4000 8000 µmhos
Re(yis) Input Conductance VDS = 15 V, VGS = 0, f = 100 MHz
5484 100 µmhos
VDS = 15 V, VGS = 0, f = 400 MHz
5485 / 5486 1000 µmhos
gos Output Conductance VDS = 15 V, VGS = 0, f = 1.0 kHz
5484 50 µmhos
5485 60 µmhos
5486 75 µmhos
Re(yos) Output Conductance VDS = 15 V, VGS = 0, f = 100 MHz
5484 75 µmhos
VDS = 15 V, VGS = 0, f = 400 MHz

Forward Transconductance
5485 / 5486
VDS = 15 V, VGS = 0, f = 100 MHz
100 µmhos 5
Re(yfs)
5484 2500 µmhos
VDS = 15 V, VGS = 0, f = 400 MHz
5485 3000 µmhos
5486 3500 µmhos
Ciss Input Capacitance VDS = 15 V, VGS = 0, f = 1.0 MHz 5.0 pF
Crss Reverse Transfer Capacitance VDS = 15 V, VGS = 0, f = 1.0 MHz 1.0 pF
Coss Output Capacitance VDS = 15 V, VGS = 0, f = 1.0 MHz 2.0 pF
NF Noise Figure VDS= 15 V, RG = 1.0 kΩ,
f = 100 MHz 5484 3.0 dB
VDS= 15 V, RG = 1.0 kΩ,
f = 400 MHz 5484 4.0 dB
VDS= 15 V , RG = 1.0 kΩ,
f = 100 MHz 5485 / 5486 2.0 dB
VDS= 15 V, RG = 1.0 kΩ,
f = 400 MHz 5485 / 5486 4.0 dB

*Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%

 2N5484 / 5485 / 5486 / MMBF5484 / 5485 / 5486
N-Channel RF Amplifier
(continued)

Typical Characteristics

Transfer Characteristics Channel Resistance vs Temperature

20 1000
V GS(OFF) = -4.5V V DS = 15V

r DS - DRAIN ON RESISTANCE ( Ω)
O
TA = -55 C 500 V GS(OFF) = -1.0V
ID - DRAIN CURRENT (mA)

16
T A = +25 C
O
300
200 -2.5 V
12 T A = +125O C O
TA = -55 C -5.0V
O 100
T A = +25 C
8 -8.0 V
T A = +125O C 50

30
4
20 V DS = 100mV
-2.5 V V =0V
GS
0 10
0 -1 -2 -3 -4 -5 -50 0 50 100 150
VGS- GATE-SOURCE VOLTAGE(V) T A - AMBIENT TEMPERATURE (°C)

Transconductance Common Drain-Source

Characteristics Characteristics
gfs -- TRANSCONDUCTANCE (mmhos)

7 5
5V .0V
O
TA = -55 C V = 15V T A = +25 C
O
DS
-0. -1
I D -- DRAIN CURRENT (mA)

6 O
V
T A = +25 C
4 TYP V GS(OFF)
= -5.0V -1.5
5 T A = +125O C -2.0V
TA = -55 C
O
0V
=
4
3 -2.5V
GS
O
T A = +25 C V
3 T A = +125O C 2 -3.0V

2 -3.5V
V GS(OFF) = -4.5V 1
1 -2.5 V -4.0V

0 0
0 -1 -2 -3 -4 -5 0 0.2 0.4 0.6 0.8 1
VGS- GATE-SOURCE VOLTAGE(V) VDS - DRAIN-SOURCE VOLTAGE(V)

Output Conductance vs Transconductance

Drain Current Parameter Interactions
gos -- OUTPUT CONDUCTANCE (u mhos)

gfs --- TRANSCONDUCTANCE ( mmhos )

r DS -- DRAIN "ON" RESISTANCE ( Ω )

100
-- DRAIN CURRENT ( mA )

O
T A = +25 C gfs, I DSS @ V DS = 15 V, V GS = 0 PULSE
V GS(OFF)
= -5.5V
f = 1.0 kHz 5.0V r DS @ VDS= 100mV, V GS = 0 50
20
V = 5v 10V 30
10 DG 15V
5 20
5 10 20V
15 10
20 15 10
20
1 5
V GS(OFF)
= -3.5V
0.5 3
DSS

20 2
V GS(OFF)
= -1.5V VGS(OFF) @ VGS = 15V, I D= 1nA
I

0.1 10 1
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 -1 -2 -3 -5 -7 - 10
I D -- DRAIN CURRENT (mA) V - GATE-SOURCE VOLTAGE(V)
GS
 2N5484 / 5485 / 5486 / MMBF5484 / 5485 / 5486
N-Channel RF Amplifier
(continued)

Typical Characteristics (continued)

Transconductance vs Noise Voltage vs Frequency

Drain Current V DG = 15V
gfs -- TRANSCONDUCTANCE (mmhos)

Hz )
10 BW = 6.0 Hz @ f = 10 Hz, 100 Hz
V GS(OFF) = - 1.5V = 0.2 f @ f > 1.0 kHz
O

5 TA = -55 C

e n- NOISE VOLTAGE ( nV/

O
T A = +25 C
O
T A = +125 C
O
TA = -55 C
1
T A = +25 C
O I D = 0.5 mA
10
0.5 T A = +125 O C
V GS(OFF) = - 5V 5
I D = 3 mA
V DG = 15V
f = 1.0 kHz
0.1 1
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 0.01 0.03 0.1 0.3 1 3 10 30 100
I D - DRAIN CURRENT (mA) f -- FREQUENCY (kHz)

Capacitance vs Voltage Noise Figure Frequency

10 5
f = 0.1 - 1.0 MHz V DS = 15V
) -- CAPACITANCE (pF)

5 I = 5.0 mA
NF -- NOISE FIGURE (dB)

D
4
R g = 1.0 k Ω
O
C is ( V DS = 15 V) T A = +25 C
3
1 C rs ( V DS = 0 V)
2
rs
C is( C

0 -5 -10 -15 -20

0
10 20 30 50 100 200 300 500 1000
5
VGS-- GATE-SOURCE VOLTAGE(V) f -- FREQUENCY (MHz)

Power Dissipation vs.

Ambient Temperature
350
P D - POWER DISSIPATION (mW)

300 TO-92

250 SOT-23

200

150

100

50

0
0 25 50 75 100 125 150
TEMPERATURE (ºC)
 2N5484 / 5485 / 5486 / MMBF5484 / 5485 / 5486
N-Channel RF Amplifier
(continued)

Common Source Characteristics

Input Admittance Output Admittance

-- OUTPUT CONDUCTANCE (mmhos)

10 1
Yiss -- INPUT ADMITTANCE (mmhos)

V DS = 15V
5 V GS = 0
(CS)
b OSS (x 10)

g OSS
1
b iss

g iss V DS = 15V
V GS = 0
(CS)

OSS
Y
100 200 300 500 700 1000 100 200 300 500 700 1000
f -- FREQUENCY (MHz) f -- FREQUENCY (MHz)

Forward Transadmittance Reverse Transadmittance

10 10
Y rss-- REVERSE TRANSFER (mmhos)
Yfss -- FORWARD TRANSFER (mmhos)

5 5
+g
fss

- b rss
-b fss
1 1

-g rss
( X 0.1)
V DS = 15V V DS = 15V
V GS = 0 V GS = 0

(CS) (CS)

100 200 300 500 700 1000 100 200 300 500 700 1000
f -- FREQUENCY (MHz) f -- FREQUENCY (MHz)
 2N5484 / 5485 / 5486 / MMBF5484 / 5485 / 5486
N-Channel RF Amplifier
(continued)

Common Gate Characteristics

Input Admittance Output Admittance

Y ogs-- OUTPUT CONDUCTANCE (mmhos)

1
Yigs -- INPUT ADMITTANCE (mmhos)

V DS = 15V
V GS = 0
(CG)
b OgS (x 10)

g
10 Ogs
g igs
5

b igs V DS = 15V
V GS = 0
(CG)
1
100 200 300 500 700 1000 100 200 300 500 700 1000
f -- FREQUENCY (MHz) f -- FREQUENCY (MHz)

Forward Transadmittance Reverse Transadmittance

10 1
Y rgs-- REVERSE TRANSFER (mmhos)
Yfgs -- FORWARD TRANSFER (mmhos)

V DS = 15V
5 +g fgs V GS = 0
(CG)
g
rgs

-b fgs
1

- b rgs

V DS = 15V
V GS = 0
(CG) 5
100 200 300 500 700 1000 100 200 300 500 700 1000
f -- FREQUENCY (MHz) f -- FREQUENCY (MHz)
 TO-92 Tape and Reel Data

TO-92 Packaging
Configuration: Figure 1.0

TAPE and REEL OPTION

FSCINT Label sample See Fig 2.0 for various
FAIRCHILD SEMICONDUCTOR CORPORATION HTB:B Reeling Styles
LOT: CBVK741B019 QTY: 10000

NSID: PN2222N SPEC:

FSCINT
Label
D/C1: D9842 SPEC REV: B2
QA REV:

5 Reels per
(FSCINT) Intermediate Box
Customized
F63TNR Label sample
Label
LOT: CBVK741B019 QTY: 2000 F63TNR
FSID: PN222N SPEC:
Label

D/C1: D9842 QTY1: SPEC REV:

Customized
D/C2: QTY2: CPN:
N/F: F (F63TNR)3 Label
375mm x 267mm x 375mm
Intermediate Box

TO-92 TNR/AMMO PACKING INFROMATION

AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Packing Style Quantity EOL code
Pack Options
Reel A 2,000 D26Z
E 2,000 D27Z
Ammo M 2,000 D74Z
P 2,000 D75Z

Unit weight = 0.22 gm

FSCINT
Reel weight with components = 1.04 kg Label
Ammo weight with components = 1.02 kg
Max quantity per intermediate box = 10,000 units 5 Ammo boxes per
327mm x 158mm x 135mm
Immediate Box Intermediate Box
Customized
Label
Customized F63TNR
Label Label
333mm x 231mm x 183mm
Intermediate Box

(TO-92) BULK PACKING INFORMATION

BULK OPTION
EOL LEADCLIP See Bulk Packing
DESCRIPTION QUANTITY
CODE DIMENSION Information table
J18Z TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX
Anti-static
J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX Bubble Sheets
FSCINT Label
NO EOL TO-92 STANDARD
NO LEADCLIP 2.0 K / BOX
CODE STRAIGHT FOR: PKG 92,
94 (NON PROELECTRON
SERIES), 96
L34Z TO-92 STANDARD
NO LEADCLIP 2.0 K / BOX
STRAIGHT FOR: PKG 94
(PROELECTRON SERIES 2000 units per 114mm x 102mm x 51mm
BCXXX, BFXXX, BSRXXX), EO70 box for
97, 98 Immediate Box
std option

5 EO70 boxes per

intermediate Box

530mm x 130mm x 83mm Customized

Intermediate box Label

FSCINT Label
10,000 units maximum
per intermediate box
for std option

©2001 Fairchild Semiconductor Corporation March 2001, Rev. B1

TO-92 Tape and Reel Data, continued

TO-92 Reeling Style

Configuration: Figure 2.0

Machine Option “A” (H) Machine Option “E” (J)

Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h)

TO-92 Radial Ammo Packaging

Configuration: Figure 3.0

FIRST WIRE OFF IS COLLECTOR FIRST WIRE OFF IS EMITTER

ADHESIVE TAPE IS ON THE TOP SIDE ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP FLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE ORDER STYLE

D74Z (M) D75Z (P)

FIRST WIRE OFF IS EMITTER (ON PKG. 92) FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM FLAT OF TRANSISTOR IS ON TOP

September 1999, Rev. B

TO-92 Tape and Reel Data, continued

TO-92 Tape and Reel Taping

Dimension Configuration: Figure 4.0

Hd
P Pd

Ha W1
d S
L
H1 HO
L1
WO t
W2

t1

P1 F1
P2 DO

ITEM DESCRIPTION SYMBOL DIMENSION

PO
Base of Package to Lead Bend b 0.098 (max)
Component Height Ha 0.928 (+/- 0.025)
User Direction of Feed
Lead Clinch Height HO 0.630 (+/- 0.020)
Component Base Height H1 0.748 (+/- 0.020)
Component Alignment ( side/side ) Pd 0.040 (max)
Component Alignment ( front/back ) Hd 0.031 (max)
Component Pitch P 0.500 (+/- 0.020)
Feed Hole Pitch PO 0.500 (+/- 0.008)
Hole Center to First Lead P1 0.150 (+0.009, -0.010)
Hole Center to Component Center P2 0.247 (+/- 0.007)
Lead Spread F1/F2 0.104 (+/- 0 .010)
Lead Thickness d 0.018 (+0.002, -0.003)
Cut Lead Length L 0.429 (max)
Taped Lead Length L1 0.209 (+0.051, -0.052)
Taped Lead Thickness t 0.032 (+/- 0.006)
Carrier Tape Thickness t1 0.021 (+/- 0.006)
Carrier Tape Width W 0.708 (+0.020, -0.019)
TO-92 Reel Hold - down Tape Width WO 0.236 (+/- 0.012)

Configuration: Figure 5.0 Hold - down Tape position W1 0.035 (max)

Feed Hole Position W2 0.360 (+/- 0.025)
Sprocket Hole Diameter DO 0.157 (+0.008, -0.007)
Lead Spring Out S 0.004 (max)

Note : All dimensions are in inches.

ELECT ROSTATIC
SEN SITIVE D EVICES

D4 D1

ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM

D2 Reel Diameter D1 13.975 14.025

F63TNR Label
Arbor Hole Diameter (Standard) D2 1.160 1.200
Customized Label (Small Hole) D2 0.650 0.700
Core Diameter D3 3.100 3.300
Hub Recess Inner Diameter D4 2.700 3.100
Hub Recess Depth W1 0.370 0.570
Flange to Flange Inner Width W2 1.630 1.690
W1 Hub to Hub Center Width W3 2.090
W2 W3

Note: All dimensions are inches

D3

July 1999, Rev. A

 TO-92 Package Dimensions

TO-92 (FS PKG Code 92, 94, 96)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]

Part Weight per unit (gram): 0.1977

©2000 Fairchild Semiconductor International January 2000, Rev. B

 SOT-23 Tape and Reel Data

SOT-23 Packaging
Configuration: Figure 1.0

Customized Label Packaging Description:

SOT-23 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
Antistatic Cover Tape 3,000 units per 7" or 177cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (anti-
static coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.
These full reels are individually labeled and placed inside
a standard intermediate made of recyclable corrugated
brown paper with a Fairchil d logo printing. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
Human Readable Embossed
Label Carrier Tape

3P 3P 3P 3P
SOT-23 Packaging Information
Standard
Packaging Option D87Z
(no flow code)
Packaging type TNR TNR SOT-23 Unit Orientation
Qty per Reel/Tube/Bag 3,000 10,000
Reel Size 7" Dia 13"
Box Dimension (mm) 187x107x183 343x343x64
343mm x 342mm x 64mm Human Readable Label
Max qty per Box 24,000 30,000
0.0082 0.0082
Intermediate box for L87Z Option
Weight per unit (gm)
Weight per Reel (kg) 0.1175 0.4006

Note/Comments

Human Readable Label sample

H uman readable
Label
187mm x 107mm x 183mm
SOT-23 Tape Leader and Trailer Intermediate Box for Standard Option
Configuration: Figure 2.0

Carrier Tape

Cover Tape
Components
Trailer Tape Leader Tape
300mm minimum or 500mm minimum or
75 empt y poc kets 125 empty pockets

©2000 Fairchild Semiconductor International September 1999, Rev. C

SOT-23 Tape and Reel Data, continued
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
P0 P2 D0 D1
T

E1

F W
E2
B0 Wc

Tc A0
P1
K0
User Direction of Feed

Dimensions are in millimeter

Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

SOT-23 3.15 2.77 8.0 1.55 1.125 1.75 6.25 3.50 4.0 4.0 1.30 0.228 5.2 0.06
(8mm) +/-0.10 +/-0.10 +/-0.3 +/-0.05 +/-0.125 +/-0.10 min +/-0.05 +/-0.1 +/-0.1 +/-0.10 +/-0.013 +/-0.3 +/-0.02

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C). 0.5mm
20 deg maximum maximum

Typical
component
cavity 0.5mm
B0 center line maximum

20 deg maximum component rotation

Typical
Sketch A (Side or Front Sectional View) component Sketch C (Top View)
A0 center line
Component Rotation Component lateral movement
Sketch B (Top View)
SOT-23 Reel Configuration: Figure 4.0 Component Rotation

W1 Measured at Hub

Dim A
Max

Dim A See detail AA

max Dim N

7" Diameter Option

B Min

Dim C

See detail AA
Dim D
W3 min

13" Diameter Option W2 max Measured at Hub

DETAIL AA

Dimensions are in inches and millimeters

Reel
Tape Size Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
Option
7.00 0.059 512 +0.020/-0.008 0.795 2.165 0.331 +0.059/-0.000 0.567 0.311 – 0.429
8mm 7" Dia
177.8 1.5 13 +0.5/-0.2 20.2 55 8.4 +1.5/0 14.4 7.9 – 10.9

13.00 0.059 512 +0.020/-0.008 0.795 4.00 0.331 +0.059/-0.000 0.567 0.311 – 0.429
8mm 13" Dia
330 1.5 13 +0.5/-0.2 20.2 100 8.4 +1.5/0 14.4 7.9 – 10.9

September 1999, Rev. C

 SOT-23 Package Dimensions

SOT-23 (FS PKG Code 49)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]

Part Weight per unit (gram): 0.0082

©2000 Fairchild Semiconductor International September 1998, Rev. A1

TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.

ACEx™ FASTr™ PowerTrench  SyncFET™

Bottomless™ GlobalOptoisolator™ QFET™ TinyLogic™
CoolFET™ GTO™ QS™ UHC™
CROSSVOLT™ HiSeC™ QT Optoelectronics™ VCX™
DOME™ ISOPLANAR™ Quiet Series™
E2CMOSTM MICROWIRE™ SILENT SWITCHER 
EnSignaTM OPTOLOGIC™ SMART START™
FACT™ OPTOPLANAR™ SuperSOT™-3
FACT Quiet Series™ PACMAN™ SuperSOT™-6
FAST  POP™ SuperSOT™-8

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.

Preliminary First Production This datasheet contains preliminary data, and

supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete Not In Production This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

Rev. G