Product Date Sheet Type CB
Updated 31/10/2017
Product name Ceramic Shots for Blast Cleaning & Micro blasting
Product type CB
Features - Reduced beads consumption (8 - 10 times) against glass blasting media.
- Lower metal surface roughness.
- Less operating pressure and reduced abrasive velocity needed than glass blasting media.
Thus have far less abrasive breakdown and dust generation, results in cleaner working
environment and better operator visibility.
- White color, highly spherical and smooth surface beads.
- Strong mechanical resistance and high toughness, but gentle with equipment and tools
preserving work parts.
- Chemically inert, no metallic contamination for treated parts.
Applications CB beads can be used in these applications (just name a few):
- Cleaning and surface preparation (deburring, etching, paint removal and cosmetic
finishing …) of molds, castings and delicate items.
- Effectively used in air or wet pressure blasting process and in wheel turbine machines.
Technical data*
Specific density 3.85 ± 0.05 g/cm3
Bulk density 2.3 kg/l
Hardness 700 HV
Color White
*typical values
Product code Size range (mm)* Product code Size range (mm)*
CB 205 0 – 0.063 CB 60 0.125 – 0.25
CB 170 0.045 – 0.09 CB 40 0.25 – 0.425
CB 120 0.063 – 0.125 CB 30 0.425 – 0.6
CB 125 0 – 0.125 CB 20 0.6 – 0.85
*other sizes can be customized
Manufacturer/ Chemco Advance Material (Suzhou) Co., Ltd
supplier Manufacturing plant: Guangfu Industrial park, Suzhou
215159, CHINA
Tel: +86 21 62082768
Fax:+86 21 54995682
Email: info@[Link]
Website: [Link]
CHEMCO Type CB ceramic shots – Data Sheet page: 1 of 2
Material Safety Data Type CB
In compliance with REACH regulation EC No.1907/2006 and US GHS
Updated 31/10/2017
Identification REACH registration numbers: Exempted from registration under REACH regulation EC
No. 1907/2006
Composition Components Weight* CAS No. EC No.
Zirconium dioxide ZrO2 60 - 70 % 1314-23-4 215-227-2
Silicon glass SiO2 20 - 30 % 60676-86-0 262-373-8
Aluminum oxide Al2O3 < 10% 1344-28-1 215-691-6
Additional information:
The ingredients of the silica-alumina vitreous phase cannot be dissociated by the
product application in surface treatment by impact and it is free from crystalline silica.
Traces of radioactive elements of natural origin (Series U238 & Th232, U + Th < 0.05 %)
*
typical values
Hazards identification CLP regulation EC 1272/2008: Not classified as a hazardous product
OSHA GHS (US): Not classified as a hazardous product
Health rating: 0 – None
Flammability rating: 0 – None
Reactivity rating: 0 – None
Possible irritation through abrasive friction.
Risk of slipping if the product (beads) is spread out on the floor.
As such, the product should not cause an inhalation problem but its utilization can
create dust.
First aid measures Eyes: may be abrasive through friction, treat as particle in eye.
Firefighting measures This product is not combustible or explosive. Does not present any particular risk in the
event of fire. Does not require any particular methods.
Accidental release Isolate the area and sweep the floor in order to collect the beads to avoid the slipping by
measures rolling.
Wear eye protectors and dust mask.
Handling and storage In case of operations, which generate dust, wear dust mask. Wear eye protectors.
Heavy material, respect the security rules in case of stocking. Use safety shoes for
handling.
Physical / Chemical Appearance and odor: odorless white beads
Properties Median diameter: < 1.0mm
Specific temperatures: over 1600℃
Bulk density: 2.3 g/cm3
Mess density: 3.85 g/ cm3
Solubility in water: insoluble
Disposal Whatever cannot be saved for recovery or recycling should be managed in an
consideration appropriate waste disposal facility. Dispose of packaging and unused contents in
accordance with governmental and local requirements.
Transport information Not restricted
CHEMCO Type CB ceramic shots – Data Sheet page: 2 of 2
