Scribd
Upload
171 views1 page

Anti-Vibration Mounts for AHU & Equipment

This document provides information about VHS housing springs used for anti-vibration mounting. It describes the product as a housing type anti-vibration mount manufactured to isolate vibration, especially horizontal thrust forces. The mount consists of an upper and lower housing, spring cap, coil spring, and neoprene pad. It is used for equipment like AHUs, air blows, generators, and pumps to reduce vibration transmission. The document also provides specification details for different models ranging from 10kg to 1200kg rated capacity.

Uploaded by

Eric Magnaye
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
171 views1 page

Anti-Vibration Mounts for AHU & Equipment

This document provides information about VHS housing springs used for anti-vibration mounting. It describes the product as a housing type anti-vibration mount manufactured to isolate vibration, especially horizontal thrust forces. The mount consists of an upper and lower housing, spring cap, coil spring, and neoprene pad. It is used for equipment like AHUs, air blows, generators, and pumps to reduce vibration transmission. The document also provides specification details for different models ranging from 10kg to 1200kg rated capacity.

Uploaded by

Eric Magnaye
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

VHS HOUSING SPRING

Rated deflection 25mm

Product Features
•Housing type anti-vibration mount.
•Manufactured in order to treat all directions of vibration,
especially horizontal thrust force can be protected by right
and left sponge during operation.
•N eoprene Pad is attached to isolate transmission of
surging effect.
•One side of Neoprene pad is cut for drain to prevent
product corrosion.

Product Configuration
•Fixing bolt and nuts
•Upper part housing
•Spring cap
•Coil spring
•Lower part housing
•Neoprene Pad

Product Usage
•AHU equipment (horizontal type, vertical type, complex
type, internal type)
•Air blows (sirocco, air foil, turbo etc)
•Generator, pump
•Anti-vibration for other vibrators

Product Specification
Mount Spring Dimension [mm]
Rated Cap Rated Def
Model Constant
(kgf) (mm)
[kgf/mm] Color Code OD HT L W H H1 a b Cap Screw Bolt

VHS-1-10 10 25 0.4 Gray


VHS-1-25 25 25 1.0 Orange
44 76 148 56 103 110 130 8 M10 x 60L
VHS-1-50 50 25 2.0 Red
VHS-1-100(A) 100 25 4.0 Blue
VHS-1-100(B) 100 25 4.0 Green
VHS-1-150 150 25 6.0 Brown
VHS-1-200 200 25 8.0 White 60 105 212 74 136 144 183 10 M12 x 60L
VHS-1-300 300 25 12.0 Orange
VHS-1-400 400 25 16.0 Blue
VHS-1-500 500 25 20.0 Green
VHS-1-600 600 25 24.0 Orange
VHS-1-750 750 25 30.0 Black 73 105 227 90 137 147 203 12 M16 x 80L
VHS-1-1000 1000 25 40.0 Yellow
VHS-1-1200 1200 25 48.0 Red
※ H1 means the height of mount which is movable type isolation mount.
※ Shape and specifications of the products can be changed without prior notice for quality and performance improvement.

NOISE & VIBRATION CONTROL SYSTEM


17

You might also like