Scribd
Upload
268 views1 page

Aggregate Crushing Value (STP 7.7.1) 10% Fines Value (STP 7.7.2)

This document summarizes test results for aggregate crushing value and 10% fines value of materials used in the Dhaka Mass Rapid Transit Development Project. The aggregate crushing value test of 2 samples found average values of 18.7%, within specifications. The 10% fines value test of 2 additional samples found an average value of 259 kN, also within specifications. Both test results met the project's specifications for the material types and intended uses.

Uploaded by

Shoyeeb Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
268 views1 page

Aggregate Crushing Value (STP 7.7.1) 10% Fines Value (STP 7.7.2)

This document summarizes test results for aggregate crushing value and 10% fines value of materials used in the Dhaka Mass Rapid Transit Development Project. The aggregate crushing value test of 2 samples found average values of 18.7%, within specifications. The 10% fines value test of 2 additional samples found an average value of 259 kN, also within specifications. Both test results met the project's specifications for the material types and intended uses.

Uploaded by

Shoyeeb Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

ITD-SINOHYDRO JV Dhaka Mass Rapid Transit Development Project

Contract No. CP-02

Aggregate Crushing Value (STP 7.7.1)

10% Fines Value (STP 7.7.2)

Material Use : Lab. Reference No:

Type of Materials : Testing Place: CP-02 Laboratory

Source of Materials: Date of Sampl 1/22/2018

Sampling Place: Date of Testing 1/23/2018

Aggregate Crushing Value (ACV)


TEST ON No.1 No.2
Load KN 400KN 400KN

Weight of Sample Surface Dry M1 g 2698 2664


Weight of Passing 2.36mm Test Sieve
g 513 492
M2
ACV=M2×100)/M1) % 19.0 18.5

Average ACV % 18.7

10% Fines Value Test


TEST ON No.3 No.4

Maximum Load Applied (KN) f KN 265 265

Wt of Sample (SSD oven Dry ) A g 2826 2844

Weight Passing 2.36mm Sieve B g 288 296

Percent Fines =(B×100)/A m % 10.2 10.4

F= 14 f / (m + 4) KN 261 257

Average F KN 259

Specification Limit : 1)ACV=lLess Than % 2)TFV=Not Less KN

1 . "m" Percentage Fines value within the range 7.5% and 12.5%

2 . (i )15 mm for rounded or partially rounded aggregates (uncrushed gravels) (ii ) 20 mm for
normal crushed aggregate.(iii) 24 mm for vesicular (honeycombed) aggregates.

Signature: Signature: Witnessed by:


Lab Technician ITD-SINOHYDRO JV's QC Engineer/Staf Site Inspector - CP - 02
NKDM - Line - 6

Document No. Revision Page No.


ITD-SINOHYDRO JV/CP02/MS/ST005/18 No. Date: of

You might also like