0% found this document useful (0 votes)
943 views2 pages

Probable Radiography Interview Questions

The document lists 36 radiography interview questions and their corresponding references from technical standards. It covers topics like liquid penetrant examination procedures, essential and non-essential variables, minimum and maximum time limits for examination steps, techniques for standard and non-standard temperatures, equipment calibration, application and interpretation methods, acceptance criteria, and documentation requirements. The questions focus on understanding liquid penetrant examination procedures, requirements, and standards.

Uploaded by

Santanu Saha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
943 views2 pages

Probable Radiography Interview Questions

The document lists 36 radiography interview questions and their corresponding references from technical standards. It covers topics like liquid penetrant examination procedures, essential and non-essential variables, minimum and maximum time limits for examination steps, techniques for standard and non-standard temperatures, equipment calibration, application and interpretation methods, acceptance criteria, and documentation requirements. The questions focus on understanding liquid penetrant examination procedures, requirements, and standards.

Uploaded by

Santanu Saha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Radiography Interview Questions
  • Continued Radiography Questions

Probable Radiography Interview questions: -

Serial Question Answer Reference


paragraph
01 Which article describes Liquid penetrant examination?
02 Does it require a written procedure? T 621.1
03 Does a procedure qualification is required? No. only demonstration T 621.2
is required unless ASME Sec VIII
specified by the code Div. 1
section. Mandatory
appendix - 8
04 What do you mean by Penetrant test equipment? T 630
05 What is meant by control of contaminants? T 641
06 How surface preparation is done? T 642
07 How much area to be prepared? T 642
08 What do you mean by essential variables? Table T 621.1
09 What do you mean by non-essential variables? Table T 621.1
10 List out essential and non-essential variables: Table T 621.1
Surface preparation Essential Table T 621.1
Penetrant group/ family Essential Table T 621.1
Penetrant application method Essential Table T 621.1
Removal of excess penetrant Essential Table T 621.1
Application of developer Essential Table T 621.1
Maximum and minimum time periods between steps Essential Table T 621.1
and drying aids
Decrease in penetrant dwell time Essential Table T 621.1
Increase in develop dwell time (interpretation time) Essential Table T 621.1
Minimum light intensity Essential Table T 621.1
Surface temperature outside of 50C to 500C or as Essential Table T 621.1
previously qualified
Performance demonstration, when required Essential Table T 621.1
Personnel qualification requirements Non-essential Table T 621.1
Materials, shapes, or sizes to be examined and the Non-essential Table T 621.1
extent of examination
Post examination cleaning technique Non-essential Table T 621.1
11 Minimum and maximum time limits for steps in
Penetrant examination procedure:
Drying after preparation T 643
Penetrant dwell time T 672
Penetrant removal for solvent removable penetrant T 673.3
Drying after penetrant removal (solvent removable) T 674
Developer application T 675
Developing and interpretation time T 675.3 & T676
12 Techniques for standard temperature T 652
13 Techniques for nonstandard temperature T 653
14 Technique restrictions T 654
15 Calibration of light meters T 660
16 Penetrant application T 671
17 Penetrant dwell time T 672
18 Excess penetrant removal T 673
19 Drying after excess penetrant removal T 674
20 Developing T 675
21 Wet developer application T 675.2
22 Developing time T 675.3
23 Interpretation T 676
24 Characterizing indications T 676.2
25 Lighting requirements T 676.3
26 Post examination cleaning T 677
27 Evaluation T 680
28 Documentation T 691
29 Records T 692
30 Which appendix of Sec VIII Div. 1 describes PT
acceptance criteria
31 Eye test requirement as per Div. 1 8-2
32 Qualification requirement as per Div. 1 8-2
33 Relevant indications 8-3
34 Linear / rounded indications 8-3
35 Acceptance standard 8-4
36 Repair requirements 8-5

You might also like