Packet Tracer – Troubleshooting Challenge (Instructor Version)
Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.
Topology
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3
Packet Tracer – Troubleshooting Challenge
Addressing Table
IPv4 Address Subnet Mask
Device Interface Default Gateway
IPv6 Address/Prefix IPv6 Link-local
172.16.1.62 255.255.255.192 N/A
G0/0
2001:DB8:CAFE::1/64 FE80::1 N/A
172.16.1.126 255.255.255.192 N/A
G0/1
2001:DB8:CAFE:1::1/64 FE80::1 N/A
R1
172.16.1.254 255.255.255.128 N/A
G0/2
2001:DB8:CAFE:2::1/64 FE80::1 N/A
10.0.0.2 255.255.255.252 N/A
S0/0/1
2001:DB8:2::1/64 FE80::1 N/A
209.165.200.226 255.255.255.252 N/A
S0/0/0
2001:DB8:1::1/64 FE80::2 N/A
Main
10.0.0.1 255.255.255.252 N/A
S0/0/1
2001:DB8:2::2/64 FE80::2 N/A
S1 VLAN 1 172.16.1.61 255.255.255.192 172.16.1.62
S2 VLAN 1 172.16.1.125 255.255.255.192 172.16.1.126
S3 VLAN 1 172.16.1.253 255.255.255.128 172.16.1.254
172.16.1.1 255.255.255.192 172.16.1.62
IT NIC
2001:DB8:CAFE::2/64 FE80::2 FE80::1
172.16.1.65 255.255.255.192 172.16.1.126
Marketing NIC
2001:DB8:CAFE:1::2/64 FE80::2 FE80::1
172.16.1.129 255.255.255.128 172.16.1.254
R&D NIC
2001:DB8:CAFE:2::2/64 FE80::2 FE80::1
64.100.0.3 255.255.255.248 64.100.0.1
Web NIC
2001:DB8:ACAD::3/64 FE80::2 FE80::1
Scenario / Background
After an update to the network, some devices were misconfigured. You have been tasked with correcting the
configurations and verifying that all the PCs can access the websites, R1, switches, and other PC can access
R1 using SSH.
Router R1 and all the switches have been preconfigured with the following:
o Enable password: Ciscoenpa55
o Console password: Ciscoconpa55
o Admin username and password: Admin1/Admin1pa55
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3
Packet Tracer – Troubleshooting Challenge
Required number of hosts per subnet:
IT: 50 hosts
Marketing: 50 hosts
R&D: 100 hosts
Requirements
IT, Marketing, and R&D PCs can navigate to www.cisco.pka and www.cisco6.pka.
IT, Marketing, and R&D PCs can SSH into R1 with the username Admin1 and encrypted password
Admin1pa55.
All PCs should be able to ping R1, S1, S2, S3, and other PCs.
Script
R1 Configuration
interface GigabitEthernet0/1
ip address 172.16.1.126 255.255.255.192
username Admin1 secret Admin1pa55
line vty 0 4
transport input ssh
S1 Configuration
No Change
S2 Configuration
interface Vlan1
ip address 172.16.1.125 255.255.255.192
S3 Configuration
No Change
IT PC Configuration
Incorrect IPv4 address
Incorrect default gateway
Marketing PC Configuration
No Change
R&D PC Configuration
Incorrect IPv6 address
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3
