Scribd
Upload
162 views3 pages

Standard Austenitic Stainless Steel Grades

The document provides information on the chemical composition ranges for various standard series of austenitic stainless steel grades. It lists the designation, chemical symbol, common name, and maximum composition percentages for elements like carbon, silicon, manganese, chromium, nickel and others. The 300 series grades include types 301, 302, 303, 304, 305, 308, 316 and others. The 200 series includes types 201, 202, 205, 209, 214 and others.

Uploaded by

k.p.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
162 views3 pages

Standard Austenitic Stainless Steel Grades

The document provides information on the chemical composition ranges for various standard series of austenitic stainless steel grades. It lists the designation, chemical symbol, common name, and maximum composition percentages for elements like carbon, silicon, manganese, chromium, nickel and others. The 300 series grades include types 301, 302, 303, 304, 305, 308, 316 and others. The 200 series includes types 201, 202, 205, 209, 214 and others.

Uploaded by

k.p.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Standard 300 series austenitic grades

Designation Chemical composition % by mass max unless stated


AISI No /
UNS No SAE No Common C Si Mn P S Cr Mo Ni Others
Name
S30100 30301 301 0.15 1.00 2.00 0.045 0.030 16.0/18.0 - 6.0/8.0 N 0.10
S30103 - 301L 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.0/8.0 N 0.20
S30153 - 301LN 0.03 1.00 2.00 0.045 0.030 16.0/18.0 - 6.0/8.0 N 0.07/0.20
S30200 30302 302 0.15 0.75 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 N 0.10
S30215 30302B 302B 0.15 2.00/3.00 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 -
S30300 30303 303 0.15 1.00 2.00 0.20 0.15 min 17.0/19.0 - 8.0/10.0
XM-5
S30310 - (303Plus 0.15 1.00 2.50/4.50 0.20 0.25 min 17.00/19.00 - 7.00/9.00 -
x)
Se 0.15
S30323 30303Se 303Se 0.15 1.00 2.00 0.20 0.060 17.0/19.0 - 8.0/10.0
min
Cu 2.5/4.0;
S30330 - 303Cu 0.15 1.00 2.00 0.15 0.10 min 17.0/19.0 - 6.0/10.0
Se 0.10
S30400 30304 304 0.07 0.75 2.00 0.045 0.030 17.5/19.5 - 8.0/10.5 N 0.10
S30400
A276 for
bar 30304 304 0.08 1.00 2.00 0.045 0.030 18.0/20.0 8.0/11.0

S30403 30304L 304L 0.030 0.75 2.00 0.045 0.030 17.5/19.5 - 8.0/12.0 N 0.10
S30403
A276 for 30304L 304L 0.030 1.00 2.00 0.045 0.030 18.0/20.0 8.0/12.0
bar
S30430 - 302HQ 0.03 1.00 2.00 0.045 0.030 17.0/19.0 - 8.0/10.0 Cu 3.0/4.0
XM-21
S30452 - 0.08 1.00 2.00 0.045 0.030 18.0/20.0 - 8.00/10.00 N 0.16/0.30
(304HN)
S30453 - 304LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 - 8.0/12.0 N 0.10/0.16
S30454 - - 0.03 1.00 2.00 0.045 0.030 18.0/20.0 - 8.0/11.0 N 0.16/0.30
S30500 30305 305 0.12 0.75 2.00 0.045 0.030 17.0/19.0 - 10.5/13.0 -
S30800 30308 308 0.08 1.00 2.00 0.045 0.030 19.0/21.0 - 10.0/12.0 -
S31600 30316 316 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10
S31603 30316L 316L 0.030 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10
Ti 5x (C+N)
/ 0.70
S31635 - 316Ti 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0
N 0.10

Nb 10x C /
1.10
S31640 - 316Cb 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0
N 0.10

S31653 - 316LN 0.030 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10/0.16
S31700 30317 317 0.08 0.75 2.00 0.045 0.030 18.0/20.0 3.0/4.0 11.0/15.0 N 0.10
S31703 - 317L 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.00/4.00 11.0/15.0 N 0.10
S31725 - 317LM 0.030 0.75 2.00 0.045 0.030 18.0/20.0 4.0/5.0 13.5/17.5 N 0.20
S31726 - 317LMN 0.030 0.75 2.00 0.045 0.030 17.0/20.0 4.0/5.0 13.5/17.5 N 0.10/0.20
S31753 - 317LN 0.030 0.75 2.00 0.045 0.030 18.0/20.0 3.0/4.0 11.0/15.0 N 0.10/0.22
Ti 5 x C
min/0.70
S32100 30321 321 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/12.0
N 0.10
Nb+Ta 10 x
S34700 30347 347 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.0/13.0
C min/1.0
Nb 10xC /
1.10; Cu
S34720 - 347F 0.08 1.00 2.00 0.040 0.18/0.35 17.00/19.00 0.75 9.00/12.00
0.75; Ta
0.05
Nb 10xC /
1.10; Cu
S34723 - 347FSe 0.08 1.00 2.00 0.11/0.17 0.030 17.00/19.00 0.75 9.00/12.00 0.75; Se
0.15/0.35;
Ta 0.05
Nb+Ta 10 x
C / 1.00;
S34800 30348 348 0.08 0.75 2.00 0.045 0.030 17.0/19.0 - 9.00/13.0 Ta:0.10
max; Co
0.20
S38400 30384 384 0.04 1.00 2.00 0.045 0.030 15.0/17.0 - 17.0/19.0 -
Standard 200 series austenitic grades
Designation Chemical composition % by mass max unless stated
AISI No /
UNS SAE
Common C Si Mn P S Cr Mo Ni Others
No No
Name

S20100 30201 201 0.15 1.00 5.5/7.5 0.060 0.030 16.0/18.0 - 3.5/5.5 N 0.25
S20103 - - 0.03 0.75 5.5/7.5 0.045 0.030 16.0/18.0 - 3.5/5.5 N 0.25
N 0.10/0.25;
S20153 - - 0.03 0.75 6.4/7.5 0.045 0.015 16.0/17.5 - 4.0/5.0
Cu 1.00
S20161 - Gall-Tough 0.15 3.0/4.0 4.0/6.0 0.040 0.040 15.0/18.0 - 4.0/6.0 N 0.08/0.20
S20162 - - 0.15 2.5/4.5 4.0/8.0 0.040 0.040 16.5/21.0 0.50/2.50 6.0/10.0 N 0.05/0.25
S20200 30202 202 0.15 1.00 7.5/10.0 0.060 0.030 17.0/19.0 - 4.0/6.0 N 0.25
XM-1
S20300 - 0.08 1.00 5.0/6.5 0.04 0.18/0.35 16.0/18.0 - 5.0/6.5 Cu 1.75/2.25
(203EZ)
S20400 - - 0.030 1.00 7.0/9.0 0.040 0.030 15.0/17.0 - 1.5/3.0 N 0.15/0.30
S20500 - 205 0.12/0.25 1.00 14.0/15.5 0.060 0.030 16.5/18.0 - 1.0/1.7 N 0.32/0.40
Nb
XM-19
S20910 - 0.06 0.75 4.0/6.0 0.040 0.030 20.5/23.5 1.50/3.00 11.5/13.5 0.10/0.30; V
(Nitronic 50)
0.10/0.30
XM-31
S21400 - 0.12 0.30/1.00 14.0/16.0 0.045 0.030 17.0/18.5 - 1.00 -
(Tenelon)
S21460 - XM-14 0.12 0.75 14.0/16.0 0.060 0.030 17.0/19.0 - 5.0/6.0 N 0.35/0.50
S21600 - XM-17 (216) 0.08 0.75 7.5/9.0 0.045 0.030 17.5/22.0 2.00/3.00 5.0/7.0 N 0.25/0.50
XM-18
S21603 - 0.03 0.75 7.5/9.0 0.045 0.030 17.5/22.0 2.00/3.00 5.0/7.0 N 0.25/0.50
(216L)
S21800 - Nitronic 60 0.10 3.5/4.5 7.0/9.0 0.060 0.030 16.0/18.0 - 8.0/9.0 N 0.08/0.18
21-6-9
S21900 - 0.08 1.00 8.00/10.00 0.045 0.030 19.0/21.50 - 5.5/7.5 N 0.15/0.40
(Nitronic 40)
XM-11
S21904 - 0.04 0.75 8.0/10.0 0.060 0.030 19.0/21.5 - 5.5/7.5 N 0.15/0.40
(Nitronic 40)
XM-29
S24000 - 0.08 0.75 11.5/14.5 0.060 0.030 17.0/19.0 - 2.3/3.7 N 0.20/0.40
(Nitronic 33)
18-2Mn
S24100 - 0.15 1.00 11.0/14.0 0.045 0.030 16.5/19.0 - 0.50/2.50 N 0.20/0.45
(Nitronic 32)
N 0.40/0.60;
S28200 - 18-18 Plus 0.15 1.00 17.0/19.0 0.045 0.030 17.0/19.0 0.75/1.25 -
Cu 0.75/1.25
Special austenitic grades
Designation Chemical composition % by mass max unless stated
AISI No /
UNS SAE
Common C Si Mn P S Cr Mo Ni Others
No No
Name
Cu 3.0/4.0; Nb
N08020 - 20Cb-3 0.07 1.00 2.00 0.045 0.035 19.0/21.0 2.00/3.00 32.0/38.0
8xC / 1.00
Cu 0.50/1.50;
N08024 - 20Mo-4 0.03 0.50 1.00 0.035 0.035 22.5/25.0 3.5/5.0 35.0/40.0
Nb+Ta 0.15/0.35
Cu 2.00/4.00; N
N08026 - 20Mo6 0.03 0.50 1.00 0.03 0.03 22.00/26.00 5.00/6.70 33.0/37.20
0.10/0.16
N08028 - Sanicro28 0.030 1.0 2.50 0.030 0.030 26.0/28.0 3.0/4.0 29.5/32.5 Cu 0.6/1.4
N08366 - AL-6X 0.03 1.00 2.00 0.040 0.030 20.0/22.0 6.0/7.0 23.5/25.5 -
Cu 0.75; N
N08367 - AL-6XN 0.030 1.00 2.00 0.040 0.030 20.0/22.0 6.0/7.0 23.5/25.5
0.18/0.25
Cu 0.50; Nb 8xC /
N08700 - JS700 0.04 1.00 2.00 0.040 0.030 19.0/23.0 4.3/5.0 24.0/26.0
0.40
Cu 1.0/2.0
N08904 - 904L 0.020 1.00 2.00 0.045 0.035 19.0/23.0 4.0/5.0 23.0/28.0
N 0.10

Cu 0.80/1.50 N
N08925 - 1925hMo 0.020 0.50 1.0 0.045 0.030 19.0/21.0 6.0/7.0 24.0/26.0
0.10/0.20
Cu 0.50/1.50 N
N08926 - - 0.020 0.50 2.00 0.030 0.010 19.0/21.0 6.0/7.0 24.0/26.0
0.15/0.25
Cronifer 1815
S30600 - 0.018 3.7/4.3 2.00 0.020 0.020 17.0/18.5 0.20 14.0/15.5 Cu 0.50
LCSi
S30601 - - 0.015 5.0/5.6 0.50/0.80 0.030 0.013 17.0/18.0 0.20 17.0/18.0 Cu 0.05; N 0.35
S31050 - 310MoLN 0.020 0.50 2.00 0.030 0.010 24.0/26.0 1.60/2.60 20.5/23.5 N 0.09/0.15
Cu 0.50/1.00; N
S31254 - 254SMO 0.020 0.80 1.00 0.030 0.010 19.5/20.5 6.0/6.5 17.5/18.5
0.18/0.22
Cu 1.00/2.50; N
S31266 - - 0.030 1.00 2.0/4.0 0.035 0.020 23.0/25.0 5.2/6.2 21.0/24.0 0.35/0.60; W
1.50/2.50
Cu 0.5/1.50; N
S31277 - - 0.020 0.50 3.00 0.030 0.010 20.5/23.0 6.5/8.0 26.0/28.0
0.30/0.40
N 0.21/0.32
S32050 - - 0.030 1.00 1.50 0.035 0.020 22.0/24.0 6.0/6.8 20.0/23.0
Cu 0.40

S32615 - - 0.07 4.8/6.0 2.00 0.045 0.030 16.5/19.5 0.30/1.50 19.0/22.0 Cu 1.50/2.50
Cu 0.30/0.60; N
S32654 - 654SMO 0.020 0.50 2.0/4.0 0.030 0.005 24.0/25.0 7.0/8.0 21.0/23.0
0.45/0.55
N 0.40/0.60; Nb
S34565 - Nirosta 4565S 0.030 1.00 5.0/7.0 0.030 0.010 23.0/25.0 4.0/5.0 16.0/18.0
0.10
S35135 - - 0.08 0.60/1.00 1.00 0.045 0.015 20.0/25.0 4.0/4.8 30./38.0 Ti 0.40/1.00
XM-15 (18-18-
S38100 - 0.08 1.50/2.50 2.00 0.030 0.030 17.0/19.0 - 17.5/18.5 -
2)
Cu 0.75/1.50; Al
S38815 - - 0.030 5.5/6.5 2.00 0.040 0.020 13.0/15.0 0.75/1.50 13.0/17.0
0.30

You might also like