H12-211 HCNA-HNTD Mock Exam

Answered by :[Link] Total exam score:100.0 Exam score:18.0

[Link] or False
RTA connects with RTB through interface Serial0. The configuration on RTA is as follow:
[RTA]aaa
[RTA-aaa]local-user huawei password cipher hello
[RTA-aaa]local-user huawei service-type ppp
[RTA]interface Serial 0
[RTA-Serial0]link-protocol ppp
[RTA-Serial0]ppp authentication-mode chap
[RTA-Serial0]ip address [Link] 30
The configuration on RTB is as follow:
[RTB]interface Serial 0
[RTB-Serial0]link-protocol ppp
[RTB-Serial0]ppp chap user huawei
[RTB-Serial0]ppp chap password cipher hello
[RTB-Serial0]ip address [Link] 30
With the configuration above, RTA and RTB are able to communicate with each other.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
A MAC address has 32 bits, the first 16 bits represent the manufactor.

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
A hub forwards any signal received from any port to all other ports .

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
One router forwards the packets according the routing table on itself without considering the
routing table of any neighbor routers.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
A static route can be either configured manually by a network administrator or generated
automatically.
 √　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
In OSPF protocol, most of the packets are sent by using reserved multicast address and unicast.
This can reduce the impact on non-OSPF speaking devices.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
On a port running frame relay,We can apply several logical sub-interface, and in each logical
sub-interface, one or more MAP items can exist.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
If the optimal path to the destination IP address is unavailable after a change occurs in a
network topology, the dynamic routing protocol can make adaptation to this change and
determine another optimal path to the destination IP address.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
In 802.1Q, a four byte field is inserted into the ethernet frame, but only 12 bits is used for
VLAN ID?

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
In broadcast network of OSPF protocol, any two DR Others will neither exchange LSA nor
send Hello packet to each other due to the existence of DR.
 √　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
When network condition changed, a static route can be rectified automatically without
reconfiguration by the network administrator .

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
If you want to reset the routers configuration. The administrator need to delete the
configuration files saved in the storage devices and then rebooting the router.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
The ICMP protocol (RFC792) is not applied to Application Layer but Network Layer.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
A Trunk port always sends tagged frames to the peer equipment.

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
The fram-relay map information is show as below. The IP address [Link] is configured on the
local device.
[RTA]dis fr map-info
Map Statistics for interface Serial0 (DTE)
DLCI = 100, IP INARP [Link], Serial0
create time = 2007/06/04 [Link], status = ACTIVE
encapsulation = ietf, vlink = 20, broadcast

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
One of the significant features of the PPP protocol is the authentication function.A PPP
connection is established only when the authentication is successful.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
Routing Information Protocol (RIP) is available in the RIPv1, RIPv2, and RIPv3 versions.

√　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
When a trunk port receive an untagged frame , the switch will drop the frame.

√　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
When you configure Frame Relay on Quidway routers, you can configure Inverse ARP instead
of static address mapping because the function of Inverse ARP is to provide dynamic address
mapping.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
Root bridges only provide root ports .
 √　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link]
What do we call the routes in the routing table that have the same cost to the same destination?

[Link] routes

[Link]-optimal routes

[Link] routes

[Link] routes

Answers of examinees：a Correct answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 2.0
[Link]
Each router only knows how to forward the packet to the next hop IP address. It doesn't know
the end to end forwarding path. This type of forwarding is called ( )

[Link] by hop forwarding

[Link] by host forwarding

[Link] by router forwarding

[Link] by network forwarding

Answers of examinees：b Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following standard organizations has defined the protocol for LAN such as 802
series protocols?
 [Link]

[Link]-T

[Link]

[Link]

Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
According to OSI reference model, switch operates at ( ) layer.

[Link]
 [Link] link

[Link]

[Link]

Answers of examinees：d Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
The data forwarding of the switch is based on ( ).

[Link] MAC address

[Link] MAC address

 [Link] IP address

[Link] IP address

Answers of examinees：d Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
What does the number "30" in the following frame relay configuration command stand for?
[RTB-Serial0]fr map ip [Link] 30

[Link] mask

[Link]

[Link]
 [Link]

Answers of examinees：c Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which layer in the TCP/IP model specifies the highest transmission rate and longest
transmission distance?

[Link] Layer

[Link] Link Layer

[Link] Layer

[Link] Layer
Answers of examinees：b Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
A PC is connected to router's Ethernet port through its network interface card. What type of
twist pair cable should be used to connect these two interfaces?

[Link] cable

[Link] cable

[Link] cable

[Link] cable

Answers of examinees：a Correct answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 2.0
[Link]
The IP address of a network is [Link]. After the network is divided into different subnets,
the subnet mask is [Link]. In this case, which of the following represents the subnet
broadcast address?

a.[Link]

b.[Link]

c.[Link]

d.[Link]

Answers of examinees：a Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which communication mode does a hub work in?
 [Link]

[Link]-duplex

[Link]-duplex mode

[Link]-negotiation

Answers of examinees：b Correct answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 2.0
[Link]
The default mask of class B address is ( ).

a.[Link]
 b.[Link]

c.[Link]

d.[Link]

Answers of examinees：c Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
In a destination MAC address, which bit of the address determines whether a frame is sent to a
“single” station or a group of stations?

a.0

b.1
 c.8

d.48

Answers of examinees：d Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following protocols is a Application layer protocol , translates a domain name
into an IP address, and manages domain names in a distributed manner?

[Link]

[Link]

[Link]
 [Link]

Answers of examinees：d Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following represents the network IP address corresponding to the [Link]/28
IP address?

a.[Link]

b.[Link]

c.[Link]

d.[Link]
Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
The default subnet mask of the class D IP address is ( ) bits.

a.8

b.16

c.24

[Link] D address does not have the subnet mask

Answers of examinees：b Wrong answer

Correct answer：
d
QuestionScore:(2.0) Current Score: 0.0
[Link]
Characterized by simple configuration and poor scalability, which of the following protocols is
based on the Bellman-Ford algorithm and sends a complete routing table to an adjacent router
at a certain interval?

[Link] vector routing protocol

[Link]-state routing protocol

[Link] gateway protocol

[Link] gateway protocol

Answers of examinees：a Correct answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 2.0
[Link]
After a change occurs in a network topology, which of the following routes does not change
automatically but changes only after the network administrator updates the change?
 [Link] route

[Link] route

[Link] route

[Link] route

Answers of examinees：a Wrong answer

Correct answer：
d
QuestionScore:(2.0) Current Score: 0.0
[Link]
OSPF is an application layer protocol and it runs on ( )

[Link], port number 520

 [Link], port number 179

[Link], Protocol Number 89

[Link] Link layer

Answers of examinees：b Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following multicast address represents all routers and hosts of the subnet?

a.[Link]

b.[Link]
 c.[Link]

d.[Link]

Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following is the abbreviation for HTTP?

[Link] Transfer Protocol

[Link] Translate Protocol

[Link] Transmit Protocol

 [Link] Transmit Protocol

Answers of examinees：d Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
OSPF takes the precedence to select ( ) as a router ID unless you specify a router ID manually.

[Link] biggest IP address of all the loopback port addresses

[Link] biggest IP address of the physical port IP addresses

c.[Link]

[Link] IP address of a port connected to an OSPF neighbor

Answers of examinees：d Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Assume an internal network has only one route to the external networks, which of the
following configurations is better?

[Link] route

[Link] route

[Link] route

[Link] route

Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following class address are multicast address ?

[Link] A

[Link] B

[Link] D

[Link] E

Answers of examinees：b Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
The shortest path tree calculated by a router in an OSPF area provides ( ) on the path from this
router to other nodes in the network.

[Link] link states

 [Link] table

[Link] address table

[Link] table

Answers of examinees：a Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
In Ethernet standard, which of the following mechanisms is used to avoid collision when
different nodes transmit packets simultaneously?

[Link]/CA

[Link]/DA
 [Link]/CD

[Link]/AC

Answers of examinees：a Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link] Choice
Which of the following functions does LCP provide?

[Link] to establish links.

[Link] to use which Layer 3 protocols.

[Link] a link when the idle timer of the link expires.

 [Link] a link to check the link quality and thus to determine whether a link can
be established.

Answers of examinees：b Wrong answer

Correct answer：
acd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
In STP, the bridge ID consists of two parts. They are ( ) and ( ).

[Link] priority

[Link] Port ID

[Link] MAC address

[Link] IP address
Answers of examinees：c Wrong answer

Correct answer：
ac
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
What features does RIPv2 provide?

[Link] of subnet mask(VLSM)

[Link] scale network

[Link] text authentication

d.MD5 encrypted text authentication

Answers of examinees：d Wrong answer

Correct answer：
acd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following statements regarding default route are correct?

[Link] route is a special type of dynamic route

[Link] of the dynamic routing protocol such as OSPF can generate default
routes.

[Link] route is used when the destination network is not in the routing table.

[Link] network IP and mask of the default route is [Link] and [Link]
respectively.

Answers of examinees：d Wrong answer

Correct answer：
bcd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
What are functions of Inverse ARP?
 [Link] the hardware address of the device according to its IP address

[Link] the DLCI number of the connection

[Link] the IP address of the remote device based on virtual circuit in Frame
Relay network

[Link] the mapping relationship between IP address of remote device and

DLCI

Answers of examinees：c Wrong answer

Correct answer：
cd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following protocols can be used for file transfer?

[Link]
 [Link]

[Link]

[Link]

Answers of examinees：b Wrong answer

Correct answer：
ab
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Data link layer has two sub-layers, they are ( )

[Link] sub-layer

[Link] sub-layer
 [Link] sub-layer

[Link] sub-layer

Answers of examinees：a Wrong answer

Correct answer：
bc
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following parameters must be specified when configure static mapping for Frame
Relay network?

[Link] DLCI

[Link] DLCI

[Link] network layer protocol address

 [Link] network layer protocol address

Answers of examinees：a Wrong answer

Correct answer：
ad
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following protocols reside at transport layer?

[Link]

[Link]

[Link]

[Link]
Answers of examinees：b Wrong answer

Correct answer：
bc
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
OSPF routers are classified into four types. Which of the following statements about interior
routers (IRs) are true?

[Link] ports on an IR belong to a same area.

[Link] IR is located in the center of a physical area.

[Link] one port on an IR connects to a backbone area.

[Link] all the ports on an IR belong to area 0, this IR functions as a backbone

router.

Answers of examinees：c Wrong answer

Correct answer：
ad
H12-211 HCNA-HNTD Mock Exam
Answered by :[Link] Total exam score:100.0 Exam score:18.0
RTA connects with RTB through interface Serial0. The configuration on RTA is as follow:
[RTA]aaa
[RTA-aaa]local-user huawei password cipher hello
[RTA-aaa]local-user huawei service-type ppp
[RTA]interface Serial 0
[RTA-Serial0]link-protocol ppp
[RTA-Serial0]ppp authentication-mode chap
[RTA-Serial0]ip address [Link] 30
The configuration on RTB is as follow:
[RTB]interface Serial 0
[RTB-Serial0]link-protocol ppp
[RTB-Serial0]ppp chap user huawei
[RTB-Serial0]ppp chap password cipher hello
[RTB-Serial0]ip address [Link] 30
With the configuration above, RTA and RTB are able to communicate with each other.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
A MAC address has 32 bits, the first 16 bits represent the manufactor.

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
A hub forwards any signal received from any port to all other ports .

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
One router forwards the packets according the routing table on itself without considering the
routing table of any neighbor routers.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
A static route can be either configured manually by a network administrator or generated
automatically.

√　　　 ×
Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
In OSPF protocol, most of the packets are sent by using reserved multicast address and unicast.
This can reduce the impact on non-OSPF speaking devices.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
On a port running frame relay,We can apply several logical sub-interface, and in each logical
sub-interface, one or more MAP items can exist.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
If the optimal path to the destination IP address is unavailable after a change occurs in a
network topology, the dynamic routing protocol can make adaptation to this change and
determine another optimal path to the destination IP address.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
In 802.1Q, a four byte field is inserted into the ethernet frame, but only 12 bits is used for
VLAN ID?

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
In broadcast network of OSPF protocol, any two DR Others will neither exchange LSA nor
send Hello packet to each other due to the existence of DR.

√　　　 ×
Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
When network condition changed, a static route can be rectified automatically without
reconfiguration by the network administrator .

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
If you want to reset the routers configuration. The administrator need to delete the
configuration files saved in the storage devices and then rebooting the router.

√　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
The ICMP protocol (RFC792) is not applied to Application Layer but Network Layer.
 √　　　 ×

Answers of examinees：√　　　 Correct answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
A Trunk port always sends tagged frames to the peer equipment.

√　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
The fram-relay map information is show as below. The IP address [Link] is configured on the
local device.
[RTA]dis fr map-info
Map Statistics for interface Serial0 (DTE)
DLCI = 100, IP INARP [Link], Serial0
create time = 2007/06/04 [Link], status = ACTIVE
encapsulation = ietf, vlink = 20, broadcast
 √　　　 ×

Answers of examinees：√　　　 Wrong answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
One of the significant features of the PPP protocol is the authentication function.A PPP
connection is established only when the authentication is successful.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
Routing Information Protocol (RIP) is available in the RIPv1, RIPv2, and RIPv3 versions.

√　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
 QuestionScore:(1.0) Current Score: 1.0
[Link] or False
When a trunk port receive an untagged frame , the switch will drop the frame.

√　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link] or False
When you configure Frame Relay on Quidway routers, you can configure Inverse ARP instead
of static address mapping because the function of Inverse ARP is to provide dynamic address
mapping.

√　　　 ×

Answers of examinees：× Wrong answer

Correct answer：
√　　　
QuestionScore:(1.0) Current Score: 0.0
[Link] or False
Root bridges only provide root ports .
 √　　　 ×

Answers of examinees：× Correct answer

Correct answer：
×
QuestionScore:(1.0) Current Score: 1.0
[Link]
What do we call the routes in the routing table that have the same cost to the same destination?

[Link] routes

[Link]-optimal routes

[Link] routes

[Link] routes

Answers of examinees：a Correct answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 2.0
[Link]
Each router only knows how to forward the packet to the next hop IP address. It doesn't know
the end to end forwarding path. This type of forwarding is called ( )

[Link] by hop forwarding

[Link] by host forwarding

[Link] by router forwarding

[Link] by network forwarding

Answers of examinees：b Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following standard organizations has defined the protocol for LAN such as 802
series protocols?
 [Link]

[Link]-T

[Link]

[Link]

Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
According to OSI reference model, switch operates at ( ) layer.

[Link]
 [Link] link

[Link]

[Link]

Answers of examinees：d Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
The data forwarding of the switch is based on ( ).

[Link] MAC address

[Link] MAC address

 [Link] IP address

[Link] IP address

Answers of examinees：d Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
What does the number "30" in the following frame relay configuration command stand for?
[RTB-Serial0]fr map ip [Link] 30

[Link] mask

[Link]

[Link]
 [Link]

Answers of examinees：c Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which layer in the TCP/IP model specifies the highest transmission rate and longest
transmission distance?

[Link] Layer

[Link] Link Layer

[Link] Layer

[Link] Layer
Answers of examinees：b Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
A PC is connected to router's Ethernet port through its network interface card. What type of
twist pair cable should be used to connect these two interfaces?

[Link] cable

[Link] cable

[Link] cable

[Link] cable

Answers of examinees：a Correct answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 2.0
[Link]
The IP address of a network is [Link]. After the network is divided into different subnets,
the subnet mask is [Link]. In this case, which of the following represents the subnet
broadcast address?

a.[Link]

b.[Link]

c.[Link]

d.[Link]

Answers of examinees：a Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which communication mode does a hub work in?
 [Link]

[Link]-duplex

[Link]-duplex mode

[Link]-negotiation

Answers of examinees：b Correct answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 2.0
[Link]
The default mask of class B address is ( ).

a.[Link]
 b.[Link]

c.[Link]

d.[Link]

Answers of examinees：c Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
In a destination MAC address, which bit of the address determines whether a frame is sent to a
“single” station or a group of stations?

a.0

b.1
 c.8

d.48

Answers of examinees：d Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following protocols is a Application layer protocol , translates a domain name
into an IP address, and manages domain names in a distributed manner?

[Link]

[Link]

[Link]
 [Link]

Answers of examinees：d Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following represents the network IP address corresponding to the [Link]/28
IP address?

a.[Link]

b.[Link]

c.[Link]

d.[Link]
Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
The default subnet mask of the class D IP address is ( ) bits.

a.8

b.16

c.24

[Link] D address does not have the subnet mask

Answers of examinees：b Wrong answer

Correct answer：
d
QuestionScore:(2.0) Current Score: 0.0
[Link]
Characterized by simple configuration and poor scalability, which of the following protocols is
based on the Bellman-Ford algorithm and sends a complete routing table to an adjacent router
at a certain interval?

[Link] vector routing protocol

[Link]-state routing protocol

[Link] gateway protocol

[Link] gateway protocol

Answers of examinees：a Correct answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 2.0
[Link]
After a change occurs in a network topology, which of the following routes does not change
automatically but changes only after the network administrator updates the change?
 [Link] route

[Link] route

[Link] route

[Link] route

Answers of examinees：a Wrong answer

Correct answer：
d
QuestionScore:(2.0) Current Score: 0.0
[Link]
OSPF is an application layer protocol and it runs on ( )

[Link], port number 520

 [Link], port number 179

[Link], Protocol Number 89

[Link] Link layer

Answers of examinees：b Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following multicast address represents all routers and hosts of the subnet?

a.[Link]

b.[Link]
 c.[Link]

d.[Link]

Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following is the abbreviation for HTTP?

[Link] Transfer Protocol

[Link] Translate Protocol

[Link] Transmit Protocol

 [Link] Transmit Protocol

Answers of examinees：d Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
OSPF takes the precedence to select ( ) as a router ID unless you specify a router ID manually.

[Link] biggest IP address of all the loopback port addresses

[Link] biggest IP address of the physical port IP addresses

c.[Link]

[Link] IP address of a port connected to an OSPF neighbor

Answers of examinees：d Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Assume an internal network has only one route to the external networks, which of the
following configurations is better?

[Link] route

[Link] route

[Link] route

[Link] route

Answers of examinees：c Wrong answer

Correct answer：
a
QuestionScore:(2.0) Current Score: 0.0
[Link]
Which of the following class address are multicast address ?

[Link] A

[Link] B

[Link] D

[Link] E

Answers of examinees：b Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link]
The shortest path tree calculated by a router in an OSPF area provides ( ) on the path from this
router to other nodes in the network.

[Link] link states

 [Link] table

[Link] address table

[Link] table

Answers of examinees：a Wrong answer

Correct answer：
b
QuestionScore:(2.0) Current Score: 0.0
[Link]
In Ethernet standard, which of the following mechanisms is used to avoid collision when
different nodes transmit packets simultaneously?

[Link]/CA

[Link]/DA
 [Link]/CD

[Link]/AC

Answers of examinees：a Wrong answer

Correct answer：
c
QuestionScore:(2.0) Current Score: 0.0
[Link] Choice
Which of the following functions does LCP provide?

[Link] to establish links.

[Link] to use which Layer 3 protocols.

[Link] a link when the idle timer of the link expires.

 [Link] a link to check the link quality and thus to determine whether a link can
be established.

Answers of examinees：b Wrong answer

Correct answer：
acd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
In STP, the bridge ID consists of two parts. They are ( ) and ( ).

[Link] priority

[Link] Port ID

[Link] MAC address

[Link] IP address
Answers of examinees：c Wrong answer

Correct answer：
ac
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
What features does RIPv2 provide?

[Link] of subnet mask(VLSM)

[Link] scale network

[Link] text authentication

d.MD5 encrypted text authentication

Answers of examinees：d Wrong answer

Correct answer：
acd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following statements regarding default route are correct?

[Link] route is a special type of dynamic route

[Link] of the dynamic routing protocol such as OSPF can generate default
routes.

[Link] route is used when the destination network is not in the routing table.

[Link] network IP and mask of the default route is [Link] and [Link]
respectively.

Answers of examinees：d Wrong answer

Correct answer：
bcd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
What are functions of Inverse ARP?
 [Link] the hardware address of the device according to its IP address

[Link] the DLCI number of the connection

[Link] the IP address of the remote device based on virtual circuit in Frame
Relay network

[Link] the mapping relationship between IP address of remote device and

DLCI

Answers of examinees：c Wrong answer

Correct answer：
cd
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following protocols can be used for file transfer?

[Link]
 [Link]

[Link]

[Link]

Answers of examinees：b Wrong answer

Correct answer：
ab
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Data link layer has two sub-layers, they are ( )

[Link] sub-layer

[Link] sub-layer
 [Link] sub-layer

[Link] sub-layer

Answers of examinees：a Wrong answer

Correct answer：
bc
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following parameters must be specified when configure static mapping for Frame
Relay network?

[Link] DLCI

[Link] DLCI

[Link] network layer protocol address

 [Link] network layer protocol address

Answers of examinees：a Wrong answer

Correct answer：
ad
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
Which of the following protocols reside at transport layer?

[Link]

[Link]

[Link]

[Link]
Answers of examinees：b Wrong answer

Correct answer：
bc
QuestionScore:(3.0) Current Score: 0.0
[Link] Choice
OSPF routers are classified into four types. Which of the following statements about interior
routers (IRs) are true?

[Link] ports on an IR belong to a same area.

[Link] IR is located in the center of a physical area.

[Link] one port on an IR connects to a backbone area.

[Link] all the ports on an IR belong to area 0, this IR functions as a backbone

router.

Answers of examinees：c Wrong answer

Correct answer：
ad