CI/SfB
(47) Nh2
October 2012
agri-steel
system
Industry
o ns truction
C
r the
el for farm build
ing
Prod ucts fo
d s
ers
te
o f Cladd ing
Ma
nufa
ishe
ctur
s
-fin
e
pr
agri-steel system
pre-finished steel for farm buildings
agri-steel system 9-part construction
Flexible, co-polymer outer Topcoat
Steadmans Agri-steel system consists
of coated steel sheets rolled to five High-build Primer
different profiles for single skin roofing
Chemical Pre-treatment
(down to 4 pitch) and walls. Agri-steel
has been designed specifically for Zinc Coating 1
un-insulated agricultural buildings. 2
Substrate
3
Agri-steel includes 8 layers of protection Zinc Coating 4
to the steel substrate including a 35
micron protective coating to both sides Chemical Pre-treatment 5
of the material - giving it excellent 6
High-build Primer
corrosion resistance and making it 7
suitable for buildings which include Flexible, co-polymer inner Topcoat 8
aggressive, high humidity conditions. 9
Agri-steel provides excellent levels of
resistance against many chemicals
Benefits
found in agricultural environments. It is Double sided 35 micron coating for protective performance
available in 3 rural and environmentally
inside and out
friendly colours and is the perfect, cost
effective alternative to profiled fibre 275g/m2 zinc coating for greater corrosion resistance
cement material. 8 layers of protection
Variety of profile options
Choice of rurally suited colours
Suitable for high-humidity applications including livestock
housing
AS10/3
Ideal alternative to fibre cement
Performance warranty up to 15 years
AS13/3
AS24/1000
AS34/1000
AS30/1000
Agri-steel : Roofing and cladding system
maintenance
Although Agri-steel is generally
performance
maintenance-free, appropriate
maintenance will considerably
Agri-steel is carefully manufactured in a controlled process to ensure consistent
extend the overall life of the
quality. It has been developed as an effective cladding material for agricultural
sheeting. We recommend:
buildings and is guaranteed to give 20 years functional performance, providing
buildings are well designed and ventilated. Agri-steel sheets are unaffected by separate treated timber
mould, fungi and mildew and do not support vermin. purlins from the cladding
sheets by using a DPC type
Agri-steel is constantly laboratory-tested in accredited laboratories to measure material;
its performance against corrosion, effect of sunlight, chemicals and abrasion.
the bottom edge of wall
Agri-steel, like all our steel cladding, is manufactured in a process certified to
sheeting be kept out of
ISO 9001:2008 and the substrate complies with BS EN 10346:2009.
continuous contact with
Performance data and load span tables for all the Agri-steel profiles are damp materials;
available from Steadmans or via our website - www.steadmans.co.uk. prolonged direct contact
with aggressive chemicals
Property Data Test (e.g. slurry) be avoided;
Gloss (60) 30 - 40% EN13523-2 if the coating is damaged,
and the substrate is visible,
Resistance to rapid deformation 16J EN13523-5
touch-up paint should be
Adhesion after indentation (7.5mm) 100% EN13523-6
applied to the exposed metal
T bend (no cracking) diameter 4T @ 16C EN13523-7 only;
Scratch resistance > 3000g EN13523-12 when the buildings are in a
Abrasion resistance < 15mg EN13253-16 coastal location, the cut
edges should be coated with
Corrosion Resistance
touch up paint;
Salt Spray (hours) 1000 EN13253-8
areas of sheeting which are
Humidity (hours) 1000 EN13253-25
not washed by rain water
Max. continuous operating temp. 100C Mill (e.g. under eaves) be washed
Min. forming temp. 16C Mill regularly to prevent the
accumulation of salts.
The figures contained in this table are typical properties and do not constitute a
specification. These figures relate to the topcoat and solid colours.
Supply and delivery
colours
The Agri-steel system is available
Agri-steel is available in 3 standard colours - see below. Special colours may also directly from Steadmans. Sheets
available, contact Steadmans for more details. are supplied in plastic wrapped
packs. Fully timber crated packs
are available for sea freight
shipping at additional cost.
Slate Blue 18B29 Juniper Green 12B29 Vandyke Brown 08B29 Agri-steel sheets are usually
delivered to site. Off loading is
The colours include the nearest British Standard reference for guidance only as the colours vary
the responsibility of the
slightly from British Standard and are for guidance only - specification should be made from an customer. Delivery by self off-
actual sample, available from Steadmans. load vehicles can be arranged.
Agri-steel : Roofing and cladding system
A. Steadman & Son
England & Wales Northern Ireland & Ireland Scotland
Warnell, Welton Unit 5, Scarva Road Ind. Est. New Edinburgh Road Mill of Crichie
Carlisle Banbridge, Co. Down View Park Fyvie, Turriff
Cumbria Northern Ireland Uddingston Aberdeenshire
CA5 7HH BT32 3QD G71 6LL AB53 8QL
Tel: 01697 478 277 Tel: 02840 660 516 Tel: 01506 437 753 Tel: 01651 891 668
Fax: 01697 478 530 Fax: 02840 660 517 Fax: 01506 440 716 Fax: 01651 891 698
E-mail: info@steadmans.co.uk
Online: www.steadmans.co.uk
ENVIRONMENTAL CREDENTIALS
We recognise the need to manage the impact which our business and processes have on the environment.
We believe we have a responsibility to contribute to the well-being of the communities we live in.
We are committed to providing a clean, safe environment.
Developing sustainable construction methods presents a challenge to the whole construction industry.
Our main raw material, steel, is eminently recyclable: 85 - 90% of steel from demolition goes for
re-use and 40% of steel used in new construction has been recycled.
By using modern machinery and upgrading our facilities we are continually reducing
the impact of our products on the environment, and improving their contribution
to the long-term performance of buildings.
u k
s . c o.
ww an
w. s t e a d m
