Scribd
Upload
1K views1 page

Spreadsheet For Gear Hobbing

This document contains input and output parameters for gear hobbing. It lists specifications for the reference gear to be cut including module, number of teeth, diameters, and depth. It also provides details on the hobbing tool such as diameter, length, number of teeth, and profile shift per tooth. Finally, it outlines machining parameters including cutting speed, feed rates, trajectory, shifting value and number, clearance distance, and machining time.

Uploaded by

vengadesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Spreadsheet For Gear Hobbing

This document contains input and output parameters for gear hobbing. It lists specifications for the reference gear to be cut including module, number of teeth, diameters, and depth. It also provides details on the hobbing tool such as diameter, length, number of teeth, and profile shift per tooth. Finally, it outlines machining parameters including cutting speed, feed rates, trajectory, shifting value and number, clearance distance, and machining time.

Uploaded by

vengadesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Gear Hobbing Tool Specifications

Spreadsheet for gear hobbing

Ref. gear to
be cut

Input Output
Norm
Material
Module [m] 0.080000 Circular pitch [p] 0.251327 mm
Z workpiece 9 dents
Workpiece
Length to cut [b] 1.500 mm distance measured over 3 teeth 0.8166
outside diameter [da] 0.8420 mm pitch diameter [d] 0.7200 mm
root (base) diameter [df] 0.5000 mm whole tooth depth [h] 0.1710 mm
blank diameter [de] 0.8500 mm toth depth on the blank [he] 0.1750 mm

Hob outside diameter [d1] 12.0 mm helix 0.3819662 °


Hob length 4.0 mm 0°22'55''
Z hob 12 dents Number of working circular pitches 2 pas
mill
Number of threads [i] 1 filet Profile shift per tooth 0.0209440 mm

0° 0' 0.0''

Cutting speed Vc 105 m/min n mill 2781 tr/min


Feed per tooth Fz 0.0048 mm/z n workpiece 309 tr/min
Feed speed [Vf] 17.8 mm/min
Machining trajectory Crossing with entering Feed per mill rotation 0.0064 mm/tour fraise
machine Feed per workpiece rotation 0.0432 mm/tour pièce
parameters Shifting value 0.502654 mm
Shifting number 8.0
Clearance distance [c] 1.439 mm
Machining time 13.997 secondes

Louis Bélet SA
CH-2943 Vendlincourt

Spreadsheet for gear hobbing Input Output Workpiece Norm Material Module [m] Circular pitch [p] mm Z workpiece dents Length t

You might also like