ACTIVITY HAZARD ANALYSIS
Project Name: T/O No:
Contractor: JV of Contractors Location/Site: AHA NO:
AHA Conducted by: Health & Safety Officer Date: Page: 1 of 1
CONCRETE WORK
ACTIVITIES HAZARD IDENTIFICATION HAZARD MITIGATION / CONTROLS
1. Fetching Machine to Site 1. The concrete machine to be fetched, off-load and safely set at right place safely & properly.
2. Access clearance 2. Ensure material (sand & aggregate) is not blocking the safe access,
1. Preparatory Works
3. Site Utilities 3. Make sure construction material not obstruct electric wires, CCTV cables, and telephone line.
4. Storage of Material 4. Better Housekeeping eliminate obstacles, Ensure Access and Egress are free from obestacles.
1. Flying debris 1. All workers on working site shall wear mandatory PPE (Helmet, Safety Shoes, Safety Goggles, Mask)
2. Dust & Smoke Inhalation 2. Dust masks shall be kept on hand to fulfill the immediate requirement at working site.
2. Compliance to Health 3. Foreign body into Eye/Injuries 3. Workers involving in mixing & vibrating work shall wear safety goggles.
and Safety Plan 4. Cuts/scrapes/abrasions 4. Be careful while handling vibrating machine (electric shock and misplacement of vibrator)
5. Struck by machines 5. All workers on site shall wear high-visibility vests, LOTO system to be followed,
6. Fall/Trip/Slip 6. Concreting area to be clean/clear free from obstacles. All workers must use mandatory PPE
1. To avoid cement dust inhalation respirator/mask is mandatory,
1. Dusts 2. Be careful while taking material to prepare slump (handle cement properly).
2. Cement. Sand & Aggregate 3. Concrete shifting pan handle properly, pass hand to hand, do not throw empty pan after delivery.
3. Fetching Material 4. Concreting work will allow only at safe area, unsafe area will be barricaded to stop the access.
5. Toe-guard, mid-rail and top-rail must exist on the working platform.
4. Working Platform
6. As possible make working surface free from slippery, mind your movement during delivery.
5. Toe-guard, Guard rails 7. Sufficient support to be provided against stipulated load and it should be checked before work start.
6. Slippery Surface 8. Make working area free from obstacles, ensuring better housekeeping,
3. Concreting Work
7. Scaffold/support failure 9. Use mandatory PPE, remove all obstacle from the access route.
8. Slip, Trip, Fall 10. Visitors not allow to working area, supervising staff keep themselves in safe distance & Helmet,
9. Falling objects Safety Shoes, Mask and Visibility Vest must be used.
10. Visitor/Supervising staff 11. Concrete mixture to be operate by skill operator, unnecessary person to be avoided at operation area.
Machine to be set properly that should not tilt or move during the motion and pouring time.
11. Mixing Operation
12. Malfunctioning machinery and equipment can cause overheating and fire, follow safe operating
12. Smoke & Fire procedure.
13. Pollution 13. Follow EMEP guideline for environmental mitigation measure, manage dust, empty bags, dirty water
properly
TRAINING REQUIRED EQUIPMENT REQUIRED
Toolbox Health and Safety Plan
Safety Induction on PPE USE Method of Statement & AHA for Concrete Work
Safe Operation Procedure PPE (Helmet, Gumboot, Mask, Earplug, Safety Googles, Gloves, Face Shield)
Emergency Evacuation & First Aid First Aid Box
