Scribd
Upload
206 views1 page

1) The Junction Box Certification Shall Be Ex (D) and Weather Proof To IP-66. Quantity: 5 Nos'

The document specifies requirements for two junction boxes. Each junction box must be Ex (d) certified and weatherproof to IP-66 standards. They must also be certified as suitable for Zone 1, Group IIB hazardous areas and have a maximum surface temperature of T3. The boxes will be made of cast iron and painted to marine grade standards. One box will have 40 terminals and the other will have 10 terminals. Both will include a stainless steel breather/drain valve and specified threaded entries on the bottom and sides.

Uploaded by

Sivareddy Induri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
206 views1 page

1) The Junction Box Certification Shall Be Ex (D) and Weather Proof To IP-66. Quantity: 5 Nos'

The document specifies requirements for two junction boxes. Each junction box must be Ex (d) certified and weatherproof to IP-66 standards. They must also be certified as suitable for Zone 1, Group IIB hazardous areas and have a maximum surface temperature of T3. The boxes will be made of cast iron and painted to marine grade standards. One box will have 40 terminals and the other will have 10 terminals. Both will include a stainless steel breather/drain valve and specified threaded entries on the bottom and sides.

Uploaded by

Sivareddy Induri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

1) The junction box certification shall be Ex (d) and Weather proof to IP-66.

Quantity: 5 nos’

JB shall be certified to Ex’d’, Suitable for Zone-1, IIB, T3, IP 66 and shall be cast iron marine grade painted. Installation.

Size: TBA by MFR.


i) Surface shall be prepared for painting as per the ZADCO specifications

- 40x terminals 2,5sqmm WDU –


- 1x SS breather/drain valve at Bottom
- 1 x M40, 2 x M32, 2x M25, at Bottom
- 6 x M20 at each side
2) The junction box certification shall be Ex (d) and Weather proof to IP-66.
Quantity: 5 nos’

JB shall be certified to Ex’d’, Suitable for Zone-1, IIB, T3, IP 66 and shall be cast iron marine grade painted. Installation.

Size: TBA by MFR.


ii) Surface shall be prepared for painting as per the ZADCO specifications

- 10x terminals 2,5sqmm WDU –


- 1x SS breather/drain valve at Bottom
- 1 x M40, 2 x M32, 2x M25, at Bottom
- 6 x M20 at each side

You might also like